EXQ60-48D3V3-2V5

EXQ60D Series Dual positive output DC/DC CONVERTERS • • • • • • • • • • • 60 W High Efficiency DC/DC Converters 1 Two positive outputs Output voltage tracking High efficiency Approved to EN60950 (TÜV Rheinland), UL/cUL1950 Operating baseplate temperature of -40 °C to +100 °C Up to 100% load imbalance Trim function No minimum load Complies with ETS 300 019-1-3/2-3 Fully compliant with ETS 300 386-1 Available RoHS compliant The EXQ60 is a new high efficiency, open frame, isolated 60 Watt converter series in an industry standard quarter-brick footprint. The EXQ60 delivers very high output current at low voltages, and excellent useable power density for today's high end applications. The first two models in the series feature an input voltage range of 33 V to 75 V and are available in output voltages of 5/3.3 V and 3.3/2.5 V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 91% for the 5/3.3 V and 90% for the 3.3/2.5 V version. The EXQ60 series also has a remote on/off capability. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950, (TÜV Rheinland) and UL/cUL1950, the EXQ60 reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability Both outputs ±10% Setpoint accuracy Both outputs (See Note 1) Output voltage 5/3.3 V (over all line and load conditions) 3.3/2.5 V Minimum load Both outputs Ripple and noise 20 MHz bandwidth 60 mV pk-pk max., 20 mV rms max. Transient response peak dev. settling time 50% to 75% and back to 1.0%, no external cap. 4.75 3.20 3.18 2.39 Short circuit protection V V V V < < < < ±1% max. Vo1 Vo2 Vo1 Vo2 < < < < 5.23 3.43 3.48 2.60 V V V V 0% 120/80 mV 100 µs Both outputs Tracking Outputs track start-up and shutdown Radiated emissions Immunity: ESD air ESD contact Radiated field enclosure Conducted (DC power) Conducted (signal) Input transients Input voltage range 48 Vin nominal Input current No load Remote OFF UVLO turn ON voltage UVLO turn OFF voltage 33-75 Vdc 60 mA max. 20 mA max. 33 V (typ) 30 V (typ) Nominal line Active high remote ON/OFF Logic compatibility ON OFF Level A Level B Level B EN61000-4-2 8 kV (NP), 15 kV (RP) EN61000-4-2 6 kV (NP), 8 kV (RP) EN61000-4-3 10 V/m (NP) EN61000-4-6 10 V (NP) EN61000-4-6 10 V (NP) ETS 300 132-2, ETR 283 Efficiency Operational insulation See table Input/output Input/baseplate 1500 Vdc 1500 Vdc Input fuse 5 A slow blow Fixed 400 kHz (5/3.3 V) 325 kHz (3.3/2.5 V) Approvals and standards (See Notes 2 and 3) UL/cUL1950, EN60950 TÜV Rheinland Weight MTBF 8 ms (typ) (See Note 4) Open Collector ref. to -input Open circuit or >4 Vdc