HPD15-12T05-12

HPD15 SERIES Single, dual and triple output • • • • • • 2.0 x 2.0 x 0.4 inch package (singles and duals) 2:1 wide input voltage range 30 models available including 2.1V and 3.3V outputs Indefinite short circuit protection EN55022 conducted emissions level A Designed to meet EN60950 and IEC950 The HPD15 series of DC/DC converters offer 15 Watts of output power in a high density 2 x 2 inch case. A range comprises 30 models with 2:1 wide input voltages of 9-18V, 18-36V and 36-72VDC. Single, dual and triple outputs are available with 2.1V and 3.3V single outputs suitable for low voltage logic requirements. Standard features of the HPD15 series include indefinite short circuit protection and undervoltage lockout. The series meets EN55022 level A conducted and radiated emissions. In addition to this, all outputs are regulated and isolated from the input. Typical applications are on board logic or analog circuits supplied by telecom distribution power voltages, cellular and telecommunications systems. [ 2 YEAR WARRANTY ] SPECIFICATION OUTPUT SPECIFICATIONS Line regulation Cross regulation All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS ±0.3% ±1.5% 4.0% max. 5.0% max. ±0.2% Isolation resistance ±4.0% Isolation capacitance Input/output Fixed Designed to meet ±2.0% Switching frequency 180 to 220kHz EN60950 IEC950 Input/output Conducted emissions Radiated emissions EN55022, FCC part 15 EN55022, FCC part 15 Level A Level A LL to HL, singles and duals LL to HL, triple output Duals: asymmetrical load 10% to 100% FL Triples: asymmetrical load 10% to 100% FL Singles and duals: 10% to 100% FL Triples: 10% to 100% FL GENERAL SPECIFICATIONS Efficiency Isolation voltage See table Input/output 78% typ. 500VDC 109Ω 1nF Load regulation Voltage accuracy Minimum load 2.1V, 3.3V, 5V 50mA max. Single 12V, 15V 20mA max. Duals & triples, each output 10% FL At start-up 20MHz bandwidth 3.0% max. 1.5% pk-pk, max. 20mV rms ±0.02%/°C Hiccup mode See Note 4 Indefinite Approvals and standards Case material Material flammability Weight MTBF Overshoot Ripple and noise Temperature coefficient Short circuit protection Black coated, metal case UL94V-0 65g (2.29oz) MIL-HDBK-217F 300,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance 9 to 18VDC 18 to 36VDC 36 to 72VDC See table 8.5VDC 17VDC 34VDC 200ms Relative humidity Altitude Vibration Operating ambient -10°C to +50°C (See derating curve) Extended temp., -25°C to +50°C option, See Note 2 Non-operating amb. -25°C to +95°C Case +95°C max. Derating See derating curve Cooling Free air convection cooled Non-condensing Operating Non operating 5Hz to 500Hz 30% to 95% 10,000 feet max. 40,000 feet max. 2.5G rms (approx.) INPUT SPECIFICATIONS Input voltage range 12VDC nominal 24VDC nominal 48VDC nominal Input current Undervoltage lockout 12V nominal (dual and triple outputs) 24V nominal 48V nominal Start-up time PAGE 1 DC/DC CONVERTERS | 15W DC/DC 15 Watt Wide input DC/DC converters INPUT VOLTAGE 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC OUTPUT VOLTAGE 2.1V 3.3V 5.0V 12V 15V ±5.0V ±12V ±15V 5V/±12V 5V/±15V 2.1V 3.3V 5.0V 12V 15V ±5.0V ±12V ±15V 5V/±12V 5V/±15V 2.1V 3.3V 5.0V 12V 15V ±5.0V ±12V ±15V 5V/±12V 5V/±15V OUTPUT CURRENT 3000mA 3000mA 3000mA 1200mA 1000mA ±900mA ±600mA ±450mA 1500mA/±300mA 1500mA/±240mA 3000mA 3000mA 3000mA 1200mA 1000mA ±900mA ±600mA ±450mA 1500mA/±300mA 1500mA/±240mA 3000mA 3000mA 3000mA 1200mA 1000mA ±900mA ±600mA ±450mA 1500mA/±300mA 1500mA/±240mA INPUT CURRENT 807mA 1213mA 1689mA 1558mA 1602mA 986mA 1530mA 1424mA 1570mA 1570mA 403mA 606mA 822mA 769mA 781mA 487mA 759mA 712mA 785mA 785mA 201mA 303mA 400mA 384mA 390mA 243mA 379mA 356mA 392mA 392mA TYPICAL EFFICIENCY 65% 68% 74% 77% 78% 76% 78% 79% 78% 78% 65% 68% 76% 78% 80% 77% 79% 79% 78% 78% 65% 68% 78% 78% 80% 77% 79% 79% 78% 78% REGULATION (Typ.) LINE ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±1.5% ±1.5% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±1.5% ±1.5% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±0.3% ±1.5% ±1.5% LOAD ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±4.0% ±4.0% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±4.0% ±4.0% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±4.0% ±4.0% MODEL NUMBER HPD15-12S2V1 HPD15-12S3V3 HPD15-12S05 HPD15-12S12 HPD15-12S15 HPD15-12D05 HPD15-12D12 HPD15-12D15 HPD15-12T05-12 HPD15-12T05-15 HPD15-24S2V1 HPD15-24S3V3 HPD15-24S05 HPD15-24S12 HPD15-24S15 HPD15-24D05 HPD15-24D12 HPD15-24D15 HPD15-24T05-12 HPD15-24T05-15 HPD15-48S2V1 HPD15-48S3V3 HPD15-48S05 HPD15-48S12 HPD15-48S15 HPD15-48D05 HPD15-48D12 HPD15-48D15 HPD15-48T05-12 HPD15-48T05-15 Notes 1 Cross regulation: Duals: output 1, full load, 6.0%; output 2, minimum load, 6.0%. Triples: output 1, full load, 3.0%; output 2 vs. output 3, 3.0%; Triples: outputs 2 and 3 vs. output 1, 6.0%. Extended operating temperature range is available as an option. To specify a HPD15 that operates down to -25°C, add the suffix ‘-4’ to the model number, e.g. HPD15-24S05-4. An alternate pin-out version is available as an option. See mechanical drawings for details. To specify an HPD15 with the alternative pin-out (center pins), add the suffix ‘-C’ to the model number, e.g. HPD15-24S05-C. All 2.1V and 3.3V outputs, 1 minute max. DERATING CURVE Output Power (Watts) Output Power (Watts) 15W -10°C 50°C 2 3 '-4' Option 4 0W 90°C 40°C 60°C 80°C 100°C -25°C 0°C 20°C Ambient Temperature (°C) http://www.artesyn.com PAGE 2 15W DC/DC | DC/DC CONVERTERS 15 Watt Wide input DC/DC converters PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 SINGLE/DUAL OUTPUTS TRIPLE OUTPUT + Input - Input + Vout Common - Vout + Input - Input + Output (V2) + 5V Common - Output (V3) Pinout (single, dual) 2.00 (50.80) 0.24 (6.00) 0.42 (10.70) 0.17 (4.40) 1.15 (3.80) 1.65 (42.00) 0.17 (4.40) 0.24 (6.00) 0.42 (10.70) Pinout (Single, Dual) 2.00 (50.80) 0.90 (22.85) 0.20 (5.10) 0.90 (22.85) Ø 0.04 Dia. (1.00) 1.70 (43.20) 2.00 (50.80) Input + 0.60 (15.25) BOTTOM VIEW Ø 0.04 Dia. (1.00) 2.00 (50.80) 0.80 (20.30) + Input BOTTOM VIEW COM/N.C. + Output 1.15 (3.80) 0.15 (3.80) 0.85 (21.60) 0.85 (21.60) 0.15 (3.80) 0.60 (15.25) COM/N.C. + 0.60 (15.25) Output 0.80 (20.30) 0.60 (15.25) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions Pinout (Triple) 0.24 (6.00) 0.50 (12.70) 0.10 (2.54) 2.0 (50.80) 0.90 (22.85) 0.20 (5.10) 0.90 (22.85) Ø 0.04 Dia. (1.00) 1.80 (45.72) + Input BOTTOM VIEW 2.00 (50.80) Output 0.39 (10.10) 0.40 (10.20) COM 5V + 0.40 (10.20) 0.39 (10.10) 0.10 (2.54) 0.40 (10.20) ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions DS_HPD15_19980401.PDF PAGE 3