LPD10-48T05-15

LPD10 SERIES Single, dual and triple output • • • • • • 4:1 wide input voltage range 16 models available including 3.3V outputs Input reflected ripple according to CEPT Continuous short circuit protection EN55022 conducted emissions level B Designed to meet EN60950 and IEC950 The LPD10 series of DC/DC converters offer 10 Watts output power in a 2 x 2 inch package. 3.3V single outputs are available along with standard single, dual and triple outputs. All models feature short circuit protection as standard. The dual and triple output models of the LPD series provide undervoltage lockout. The LPD10 series complies with the rigorous EN55022 level B conducted emissions. The optimized thermal design and the copper case allow operation in ambient temperatures up to +70°C without derating or an additional heatsink. [ 2 YEAR WARRANTY ] SPECIFICATION OUTPUT SPECIFICATIONS Line regulation Load regulation All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS ±0.1% ±1.0% ±0.1% ±3.0% 4.0% max. 5.0% max. ±2.0% ±3.0% Conducted noise Radiated noise EN55022, FCC part 15 EN55022, FCC part 15 Level B Level B LL to HL, singles and duals LL to HL, triple output Singles and duals: 10% to 100% FL Triples: 10% to 100% FL Duals: asymmetrical load 10% to 100% FL Triples: asymmetrical load 10% to 100% FL Singles Duals GENERAL SPECIFICATIONS Efficiency Isolation voltage Isolation resistance Isolation capacitance Input/output Input/output Input/output Fixed Safety See table 500VDC 108Ω 1nF 180 to 220kHz VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Black coated, metal case UL94V-0 65g (2.29oz) MIL-HDBK-217F 300,000 hours Cross regulation (See Note 1) Voltage accuracy Minimum load Switching frequency Approvals and standards (pending) Case material Material flammability Weight MTBF 3.3V, 5V 50mA max. Single 12V, 15V 20mA max. Duals & triples, each output 10% FL At start-up 20MHz bandwidth 3.0% max. 1.0% pk-pk, max. 20mV rms ±0.02%/°C Hiccup mode Continuous automatic recovery Overshoot Ripple and noise Temperature coefficient Short circuit protection (See Note 2) ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -10°C to +70°C (See derating curve) Non-operating amb. -25°C to +95°C Case +95°C max. Derating See derating curve Cooling Free air convection cooled Non-condensing Operating Non operating 5Hz to 500Hz 30% to 95% 10,000 feet max. 40,000 feet max. 2.5G rms (approx.) INPUT SPECIFICATIONS Input voltage range Input current Undervoltage lockout 24VDC nominal, FL 48VDC nominal, FL 10 to 36VDC 20 to 72VDC See table Dual and triple outputs 24V nominal 9.5VDC max. 48V nominal 18.5VDC max. 200ms Relative humidity Altitude Vibration Start-up time Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. PAGE 108 DC/DC CONVERTERS | 10W DC/DC 10 Watt Wide input DC/DC converters INPUT VOLTAGE 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC OUTPUT VOLTAGE 3.3V 5.0V 12V 15V ±12V ±15V 5V/±12V 5V/±15V 3.3V 5.0V 12V 15V ±12V ±15V 5V/±12V 5V/±15V OUTPUT CURRENT 2000mA 2000mA 800mA 660mA ±400mA ±300mA 1000mA/±200mA 1000mA/±160mA 2000mA 2000mA 800mA 660mA ±400mA ±300mA 1000mA/±200mA 1000mA/±160mA INPUT CURRENT 381mA 540mA 512mA 512mA 512mA 512mA 510mA 510mA 190mA 267mA 253mA 253mA 253mA 253mA 255mA 255mA TYPICAL EFFICIENCY 72% 77% 78% 78% 78% 78% 80% 80% 72% 78% 79% 79% 79% 79% 80% 80% REGULATION (TYP.) MODEL NUMBER LINE ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±1.0% ±1.0% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±1.0% ±1.0% LOAD ±0.2% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±3.0% ±3.0% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±3.0% ±3.0% LPD10-24S3V3-C LPD10-24S05-C LPD10-24S12-C LPD10-24S15-C LPD10-24D12-C LPD10-24D15-C LPD10-24T05-12 LPD10-24T05-15 LPD10-48S3V3-C LPD10-48S05-C LPD10-48S12-C LPD10-48S15-C LPD10-48D12-C LPD10-48D15-C LPD10-48T05-12 LPD10-48T05-15 Notes 1 Cross regulation: Duals: output 1, full load, 4.0%; output 2, minimum load, 4.0%. Triples: output 1, full load, 2.0%; output 2 vs. output 3, 2.0%; Triples: outputs 2 and 3 vs. output 1, 5.0%. All 3V3 outputs, 1 minute max. DERATING CURVE Output Power (Watts) 2 10W Output Power (Watts) 70°C 5 95°C 0W -10°C 0°C 20°C 40°C 60°C 80°C 100°C Ambient Temperature (°C) Pinout (Single, Dual) 0.24 (6.00) 0.42 (10.70) 0.90 (22.85) 2.00 (50.80) 0.20 (5.10) 0.90 (22.85) 0.24 (6.00) 0.50 (12.70) 0.10 (2.54) Pinout (Triple) 2.0 (50.80) 0.90 (22.85) 0.20 (5.10) 0.90 (22.85) 0.60 (15.25) Ø 0.04 Dia. (1.00) + Input Ø 0.04 Dia. (1.00) 2.00 (50.80) 0.80 (20.30) Input + 2.00 (50.80) 1.80 (45.72) BOTTOM VIEW BOTTOM VIEW COM/N.C. + Output 0.10 (2.54) 0.60 (15.25) COM 5V Output 0.60 (15.25) 0.80 (20.30) 0.60 (15.25) 0.39 (10.10) + 0.40 (10.20) 0.40 (10.20) 0.40 (10.20) 0.39 (10.10) DS_LPD10_20000101.PDF ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions ALL DIMENSIONS IN INCHES (mm) Tolerance : ±0.008 (0.2) max. on pin placement ±0.02 (0.5) max. on outer dimensions http://www.artesyn.com PAGE 109