NFS40-7608J

Embedded Power for Business-Critical Continuity Rev.02.01.10_65 NFS40 Series 1 of 4 NFS40 Series SIngle and triple output Total Power: 40 - 50W Input Voltage: 85 - 264 Vac 120 - 370 Vdc # of Outputs: Single, triple Electrical Specifications Special Features • 5.0 x 3.0 x 1.2 inch package (1U applications) • Industry standard package • Overvoltage and short circuit protection • 40 W with free air convection • 50 W with 20 CFM forced air • EN55022, EN55011 conducted noise level B • UL, VDE and CSA safety approvals • Available RoHS compliant • 2 year warranty Input Voltage adjustability: +5 V output on triples Vout on singles ± 5.0% ± 5.0% Line regulation: LL to HL, FL Main output Auxiliary outputs ± 0.2% ± 1.0% Load regulation: FL to NL Main output Auxiliary outputs ± 2.0% ± 5.0% Transient response: +5 V (1.5 - 3 A) ± 120 mV max. dev. 500 µs recovery Temperature coefficient: All outputs ± 0.02%/°C Overvoltage protection: +5 V output S3.15 A, 250 Vac In live and neutral Output power limit: Primary power limited 90 W input power limit Short circuit protection: Single outputs Multiple outputs Continuous Short term Universal input 85 - 264 Vac 120 - 370 Vdc Output Input voltage range: Input frequency range: Safety • VDE0805/EN60950/ • IEC950/IEC1010 • File No. 10401-3336-0044 • License No. 2559 • UL1950 File No. E136005 • CSA C22.2 No. 950 • File No. LR41062C 47-440 Hz Max. input surge current: 132 Vac, cold start 264 Vac, cold star 12 A max. 24 A max. Safety ground leakage current: 110 Vac, 60 Hz 230 Vac, 50 Hz 0.13 mA, max. 0.32 mA, max. Embedded Power for Business-Critical Continuity Rev.02.01.10_65 NFS40 Series 2 of 4 Specifications All specifications are typical at nominal input, full load at 25 °C unless otherwise stated EMC Charateristics (11, 12) Conducted emissions: EN55022, FCC part 15 Level B Radiated emissions: EN55022 Level A ESD air: EN61000-4-2, level 3 Perf. criteria 1 ESD contact: EN61000-4-2, level 4 Perf. criteria 1 Surge: EN61000-4-2, level 3 Perf. criteria 1 Fast transients: EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity: EN61000-4-3, level 3 Perf. criteria 2 Conducted immunity: EN61000-4-6, level 3 Perf. criteria 2 110 Vac, 40 W 230 Vac, 40 W 14 ms 110 ms General Specifications Hold-up time: Efficiency: Isolation voltage: 70% typical Input/output Input/chassis 3000 Vac 1500 Vac Switching frequency: Variable Approvals and standards: (see VDE0805, EN60950, IEC950, IEC1010, Notes 9, 13) UL1950, CSA C22.2 No. 950 Weight: 280 g (9.88 oz) MTBF demonstrated: MIL-HDBK-217E 170,000 hours Environmental Specifications Thermal performance: Operating 0° C to +70 °C (See notes 8, 10) Non-operating -40 °C to +85 °C 50 °C ambient temp., convection cooled 40 W Forced air cooling 50 W @ 20 CFM +50 °C to +70 °C ambient Derate linearly to 50% load Peak (60 seconds) 60W Relative humidity: Non-condensing 5 to 80% RH Altitude: Operating 10,000 feet max. Non-operating 40,000 feet max. 5-500 Hz 2.4 G rms peak Vibration (See Note 11): Embedded Power for Business-Critical Continuity Ordering Information Output Voltage Output Currents Ripple (4) Total Regulation (5) Fan (3) Model Numbers (13, 14, F) Max (1) Peak (2) +5.1 V (A) 3A 7A 5A 50 mV ± 2.0% +12 V (B) 2A 3A 2A 120 mV ± 5.0% –12 V (C) 0.35 A 1A 0.5 A 120 mV ± 5.0% +5.1 V (A) 4A 7A 5A  50 mV ± 2.0% +12 V (B) 0.35 A 1A 0.5 A 120 mV ± 5.0% -12 V (C) 0.35 A 1A 0.5 A 120 mV + 5.0% +5.1 V (A) 3A 7A 5A 50 mV ± 2.0% +12 V (B) 2A 3A 2A 120 mV ± 5.0% -5.0 V (C) 0.35 A 1A 0.5 A 50 mV ± 5.0% +5.1 V (A) 3A 7A 5A 50 mV ± 2.0% +15 V (B) 2A 2.5 A 2A 150 mV ± 10.0%/-3.0% –15 V (C) 0.35 A 1A 0.5 A 150 mV ± 5.0% 3.3 V 6A 12 A 8A 100 mV ± 2.0% NFS40-76S3J +5.1 V 6A 12 A 8A 100 mV ± 2.0% NFS40-7605J +12.0 V 3.3 A 5A 4A 120 mV ± 2.0% NFS40-7612J +15.0 V 2.6 A 4A 3.3 A 150 mV ± 2.0% NFS40-7615J +24.0 V 1.6 A 2.5 A 2A 240 mV ± 2.0% NFS40-7624J Notes 1 Natural convection cooled, 40 W maximum. 2 Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, outputs may go outside of total regulation limits. Peak total power must not exceed 60 W. 3 Forced air, 20 CFM at 1 atmosphere, 50 W maximum. 4 Figure is peak-to-peak. Output noise is measured across a 50 MHz bandwidth using a 12 inch twisted pair, terminated with a 47 µF capacitor. 5 Total regulation is defined as the static output regulation at 25 °C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. Also, 0.25