NLP110-9995

NLP110 Medical Series Single and triple output LOW TO MEDIUM POWER AC/DC POWER SUPPLIES • • • • • • • • • 80-110W AC/DC Universal Input Switch Mode Power Supplies 1 Provides low voltage outputs Compliance to EN61000-3-2 (Power Factor = 0.98) Smallest industry standard package 6.5 x 3.0 x 1.26 inches 90VAC to 264VAC universal input range UL, cUL, and VDE safety approvals and CE-Marked to MDD Overvoltage and short circuit protection VDE0871-A, EN55022-A, EN55011-A conducted noise VDE0871-A, EN55022-A, EN55011-A radiated noise Meets all applicable and relevant immunity standards EN61000-4-2,4,5 and 6 The NLP110 Medical is a series of 110W AC/DC open-frame power supplies in a 3” x 6.5” x 1.26” package. The NLP110 Medical is power factor corrected to meet EN61000-3-2 and is available in single and multiple output models. The multiple output models have a capability that is unique to the power supply market - they can deliver equal amounts of current on multiple low voltage outputs to support designs that will span the industry transition from 5V logic to 3.3V logic. The NLP110 Medical is practically the same size as a 65 Watt 3” x 5” product, e.g. NLP65 Medical - the one difference is that the footprint is a mere 1.5 inches longer. The NLP110 Medical series, with full medical safety approval per UL2601-1, C22.2 No. 601.1-M90, VDE0750, IEC60601-1 and EN60601-1 and CE marked, greatly accelerating design-in time and reducing system compliance costs. All specifications are typical at nominal input, full load at 25°C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Total regulation (Line and load) Rise time Transient response Main output Auxiliary outputs At turn-on Main output 75% to 100% step at 0.1A/µs ±2.0% ±5.0% 1.0s, max. 5.0% or 250mV max. dev., 1ms max. recovery to 1% ±0.02%/°C Main outputs Cyclic operation Single and multiple 125%, ±10% Continuous See table EMC CHARACTERISTICS (continued) Surge Fast transients Radiated immunity Conducted immunity EN61000-4-5 EN61000-4-4 EN61000-4-3 EN61000-4-6 Level Level Level Level 3 3 3 3 GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Approvals and standards Weight 120VAC, 60Hz 120VAC, 80W (-9605) Input/output Input/chassis 16.7ms @ 110W 75% min. 4000VAC 1500VAC Temperature coefficient Overvoltage protection Short circuit protection Minimum output current INPUT SPECIFICATIONS Input voltage range (See Note 6) Input frequency range Input surge current (cold start) Safety ground leakage current Input current 120VAC 230VAC 230VAC, 50Hz 120VAC 120VAC 230VAC 230VAC @ @ @ @ 80W 110W 80W 110W Universal input EN60601-1, IEC60601-1,VDE0750, UL2601-1, C22.2 No. 601.1-M90 283g (10oz) MIL-HDBK-217F (9) 90 to 264VAC 47Hz to 63Hz 18A max. 35A max.