NTS358-CF

POWER NTS350 Series 350 Watts Data Sheet Total Power: 200 - 350 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Single Special Features ƒƒ Active power factor correction ƒƒ IEC EN6100-3-2 compliance ƒƒ Remote sense ƒƒ Power fail and remote inhibit ƒƒ Single wire current sharing ƒƒ Built-in EMI filter ƒƒ Low output ripple ƒƒ 5 V standby ƒƒ 12 V fan output ƒƒ Overvoltage protection ƒƒ Overload protection ƒƒ Thermal overload protection ƒƒ DC power good ƒƒ Built in OR-ing diode/FET ƒƒ Optional fan cover (-CF suffix) ƒƒ Optional end fan cover (-CEF suffix) Electrical Specifications Safety ƒƒ TUV 60950 ƒƒ UL 0950 ƒƒ CSA 60950 ƒƒ cULus 60950 (-CEF) ƒƒ NEMKO 60950 ƒƒ AUSTEL 60950 ƒƒ CB Certificate and report ƒƒ CE Mark (LVD) ƒƒ CCC Certificate Input Input ra­nge: 85 - 264 Vac (wide range) Frequency: 47 - 440 Hz (47- 63 Hz for -CEF versions) Inrush current: 38 A max., cold start @ 25 °C Efficiency: 85% typical at full load EMI filter: FCC Class B conducted and radiated; CISPR22 Class B conducted and radiated; EN55022 Class B conducted and radiated; VDE0878PT3 Class B conducted and radiated. Safety ground leakage current: < 0.5 mA @ 50/60 Hz, 264 Vac input Output Maximum power: 200 W for convection; 350 W with 30CFM forced air Adjustment range: ± 5% Standby output: 5 V @ 2 A regulated, ± 5% Fan output: 12 V @ 1 A, -5 %, +7%, 0.5 A for -CF version Hold-up time: 20 ms @ 350 W load, 115 Vac nominal line at factory voltage setting Overload protection: Short circuit protection on all outputs. Case overload protected @ 115 - 130% of peak rating Overvoltage protection: 20 - 35% above nominal output NTS350 Series Data Sheet Logic Control Power failure TTL logic signal goes high 100 - 500 msec after main output. It goes low at least 4 msec before loss of regulation Remote on/off Requires an external contact closure to inhibit outputs DC OK TTL logic goes high after the output is in regulation. It goes low when there is loss of regulation. Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Environmental Specifications Operating temperature: 0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. Storage temperature: -40 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Operating; non-condensing 10% to 90% RH Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances. 2 G peak 8 Hz to 500 Hz, operational MTBF demonstrated: 1M hours at full load and 25 °C ambient conditions Ordering Information Model Number Output Voltage Maximum Load Maximum Load Minimum Load with Convection with 30CFM Cooling Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 NTS353 12 V 0A 16.6 A 29.2 A 33 A ± 2% 120 mV NTS355 24 V 0A 8.3 A 14.6 A 16.5 A ± 2% 240 mV NTS358 48 V 0A 4.2 A 7.3 A 8.2 A ± 2% 480 mV NTS359 54 V 0A 3.7 A 6.5 A 7.4 A ± 2% 540 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3­. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4­. CF suffix added to the model number indicates cover with top fan. -CEF suffix added to the model number indicates cover with end mounted fan cover and AC inlet 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. NTS350 Series Data Sheet Pin Assignments Adjustment Potentiometers Connector P1 +V1 Output adjust +5VSB adjust SK1 SK5 1 5 6 10 PIN 1 Line P3 PIN 3 Neutral Mating Connectors PIN 5 Ground SK1 AC input PIN 1 V1 swp Molex 09-91-0500 (UK) PIN 2 - Remote Sense PINS:08-52-0113 PIN 3 + Remote Sense SK2,3,4 Molex BB-124-08 PIN 4 5VSB (standby) SK5 Control signals Molex 90142-0010 PIN 5 5VSB return PIN 6 +12V PIN 7 Common PIN 8 Inhibit PIN 9 DC power good (DC OK) PIN 10 Power Fail (POK) Molex 09-50-8051 (USA) PINS: 90119-2110 Or Amp: 87977-3 PINS: 87309-8 Artesyn Embedded Power Connector Kit #70-841-022 includes all of the above 1.Specifications subject to change without 2.All dimensions in inches (mm), tolerance is ± 0.2”. 3.Specifications are at factory settings 4.Mounting maximum insertion depth is 0.12”. 5.Warranty: 2 year 6.Weight: NTS35X 1.65 lbs/750g. NTS35X-CF 2 lbs/909g. NTS35X-CEF 2.25 lbs/1022g. NTS350 Series Data Sheet Mechanical Drawing + V OR-ing out (Must be used in parallel operation) (Do not use in parallel operation) + V out Common 531 SK1 -CF option (SEE NOTE 5) 1.27 (32.26) 1.14 (29.1) P1 Voltage ADJ POT 5 10 1 6 P1 P3 -CF option a b b a .75 (19.1) (3X) 1.5 (38.10) 5.85 (148.7) 6.25 (158.7) 6.4 (2X) b a a b 2.5 (63.5) (4X) b a 4.0 (101.6) a b 4.7 (119.6)(2X) 5.5 (139.7) (2X) 7.0 (177.8) #6-32 (8 places) M3 (8 places) P1 P3 NTS350 Series Data Sheet Mechanical Drawing - CEF option b a a b AIR FLOW DIRECTION 1.61" (40.9) 1.255" (31.9) 0.862" (21.9) 0.862" (21.9) 4.0" (101.6) 9.15" (232.3) a b b a 5.85" (148.6) 2.40" (61) 6.244" (158.6) a b a b a b 2.9" (73.6) 4.7" (119.6) 0.752" (19.1) 6.437" (63.5) a b 5.5" (139.7) #6-32 (8 places) M3 (8 places) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 South Diablo Way Suite B100 Tempe, AZ 85282, USA +1 888 412 7832 Ground Floor Offices, Barberry House 4 Harbour Buildings, Waterfront West Brierley Hill, West Midlands DY5 1LN, UK +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com For support: productsupport.ep@artesyn.com NTS350 DS 18Dec2019