PTH12030LAZ

Rev. 2.19.09_167 PTH12030 Series  of 6 Embedded Power for Business-Critical Continuity Rev. 3.10.09_167 PTH12030 Series  of 5 PTH12030 12 Vin Total Power: # of Outputs: 143 Watts Single Specifications Input Special Features Input voltage range: (See Note 3, page 3) 10.2 - 13.8 Vdc • 26 A output current • 12 V input voltage • Wide-output voltage adjust • 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ • Auto-track™ sequencing* • Margin up/down controls • Efficiencies up to 94.5% • Output ON/OFF inhibit • Output voltage sense • Point-of-Load-Alliance (POLA) compatible • Available RoHS compliant • 2 Year Warranty Input current: No load 10 mA typ. Remote ON/OFF: (See Note 1, page 3) Positive logic 1 V/ms Undervoltage lockout: 8.5 - 9.5 V typ. Track input voltage: • UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 (EN60950) Certificate No. B 04 06 38572 044 • CB Report and Certificate to IEC60950, Certificate No. US/8292/UL Pin 11 (See Note 6, page 3) ± 0.3 Vin Suffix ‘-W’ Suffix ‘-L’ 1.2 - 5.5 Vdc 0.8 - 1.8 Vdc Output Voltage adjustability: (See Note 4, page 3) Setpoint accuracy: ± 2.0% Vo Line regulation: ± 5 mV typ. Load regulation: ± 5 mV typ. Total regulation: ± 3.0% Vo Minimum load: 0A Ripple and noise: 20 MHz bandwidth (See Note 8, page 3) Temperature co-efficient: Safety • TÜV Product Service Start-up time: Suffix ‘-W’ Suffix ‘-L’ 25 mV pk-pk 15 mV pk-pk -40 °C to +85 °C ± 0.5% Vo Transient response: (See Note 5, page 3) 50 µs recovery time Margin adjustment: ± 5.0% Vo Overshoot/undershoot 150 mV All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF, Cout = 0 µF *Auto-track™ is a trade mark of Texas Instruments Embedded Power for Business-Critical Continuity Rev. 3.10.09_167 PTH12030 Series  of 5 Specifications Continued EMC Characteristics Electrostatic discharge: EN61000-4-2, IEC801-2 Conducted immunity: EN61000-4-6 Radiated immunity: EN61000-4-3 General Specifications Efficiency: See efficiency table on page 3 Insulation voltage: Non-Isolated Switching frequency: Approvals and standards: Over Vin and Io ranges EN60950, UL/cUL60950 Material flammability: Dimensions: UL94V-0 (L x W x H) Weight: MTBF: 575 kHz typ. 34.80 x 28.45 x 9.00 mm 1.370 x 1.120 x 0.354 in 7g (0.25 oz) Telcordia SR-332 2,821,000 hours Environmental Specifications Thermal performance: (See Note 2, page 3) Operating ambient, temperature Non-operating -40° C to +85 °C -40° C to +125 °C MSL (‘Z’ suffix only): JEDEC J-STD-020C Level 3 Protection Short circuit: Thermal: Auto reset 40 A typ. Auto recovery Embedded Power for Business-Critical Continuity Rev. 3.10.09_167 PTH12030 Series  of 5 Ordering Information Output Power (max) Input Voltage Output Voltage 143 W 10.2 - 13.8 Vdc 143 W 10.2 - 13.8 Vdc Output Currents Min Max Efficiency (max) 0.8 - 1.8 Vdc 0A 26 A 89% ±5 mV ±5 mV PTH12030L 1.2 - 5.5 Vdc 0A 26 A 94.5% ±5 mV ±5 mV PTH12030W Part Number System with Options Regulation Line Load M������������� odel Numbers (9, 10) PTH12030WAST Product Family Point of Load Alliance Compatible Packaging Options No Suffix = Trays T = Tape and Reel (8) Input Voltage 12 = 12 V Mounting Option (9) D = Horizontal Through-Hole (RoHS 6/6) H = Horizontal Through-Hole (RoHS 5/6) S = Surface-Mount Solder Ball (RoHS 5/6) Z = Surface-Mount Solder Ball (RoHS 6/6) Output Current 03 = 26 A Pin Option A = Through-Hole Std. Pin Length (0.140”) A = Surface-Mount Tin/Lead Solder Ball Mechanical Package Always 0 Output Voltage Code W = Wide, L = Low Voltage Output Voltage Adjustment of the PTH12030 Series The ultra-wide output voltage trim range offers major advantages to users who select the PTH12030. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’. When the PTH12030 converter leaves the factory the output has been adjusted to the default voltage of 1.2 V for the PTH12030W and 0.8 V for the PTH12030L. Efficiency Table - PTH12030W (Io = 18 a) Output Voltage Efficiency Vo = 5.0 V 94.5% Vo = 3.3 V 92.7% Vo = 2.5 V 91.4% 1 2 Vo = 2.0 V 90.3% 3 Vo = 1.8 V 89.5% 4 Vo = 1.5 V 88.2% Vo = 1.2 V 86.2% Efficiency Table - PTH12030L (Io = 18 a) Output Voltage Efficiency Vo = 1.8 V 89% Vo = 1.5 V 87% Vo = 1.2 V 85% Vo = 1.0 V 83% Vo = 0.8 V 80% Notes 5 6 7 8 9 9 Remote ON/OFF. Active High ON: Pin 4 open; or V > Vin - 0.5 V OFF: Pin 4 GND; or V