SIL05E-05W3V3-VJ

SIL05E Series | 5 A DC-DC Converter E Class Non-Isolated SIL05E SERIES 0.75 Vin to 3.63 Vin Single output 5 A current rating Output voltage range: 0.75 Vdc to 3.63 Vdc Applications for 5 V or 3.3 V input POL converters High power density (179W/in3) High efficiency - typically 94% for 5 V in and 3.3 V out SIL POL converter that saves board space Industry standard footprint Remote ON/OFF Available RoHS compliant THE SIL05E series are non-isolated SIL dc-dc converters packaged in an industry standard footprint giving designers a cost effective solution for conversion from either a 5 V or 3.3 V input to output voltages of 3.63 Vdc and 0.75 Vdc. The SIL05E offers a wide output range, which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIL05E series from existing 5 V or 3.3 V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIL05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL05E offers compact size and efficiencies of up to 94%. [ 2 YEAR WARRANTY ] 1 File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Input voltage - continuous Input voltage - peak/surge Operating temperature Symbol Vin (cont) Vsurge Top Min -0.3 -0.3 -40 Typ Max 5.5 6 85 Units V DC V DC ºC Notes and Conditions Vin(+) - Vin(-) 2s max, non-repetitive Measured at thermal reference points, see Note 5 for thermal de-rating Storage temperature Output power (W3V3) Tstorage Pout (max) -40 0 125 18.15 ºC W All specifications are typical at nominal input Vin = 5V, full load under any resistive load combination at 25˚C unless otherwise stated. Input Characteristics Characteristic Input voltage - operating Input current - no load Input current - quiescent Inrush current (i2t) Input ripple current Input fuse* *See Application Note 147 for manufacturer and part number Symbol Vin (oper) lin lin (off) linrush Min 3 Typ 5 70 2 0.04 40 6 Max 5.5 150 Units V DC mA DC mA DC A2s mA rms A Notes and Conditions See Note 6 Vin (min) - Vin (max), enabled Converter disabled Complies with ETS300 132 Part 4.7, with recommended LISN Slowblow/antisurge HRC recommended Turn On/Off Characteristic Input voltage - turn on Turn on delay - enabled, then power applied Symbol Vin (on) Tdelay (power) Min 2 Typ 2.70 20 Max 3 Units V DC msec Notes and Conditions Will regulate @ Vin >3V if Vout ≤ 2.5V With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band From 10% to 90%; full resistive load, no external capacitance Turn on delay - power applied, then enabled Tdelay (enable) 20 msec Rise time Trise 15 msec 2 File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | 5 A DC-DC Converter E Class Non-Isolated Signal Electrical Interface Characteristic - Signal Name Symbol At remote/control ON/OFF pin High level input current Iih Min Typ Max Units Notes and Conditions See Notes 2 and 3 Current flowing into control pin when pin is pulled high (max at Vih = 5.5V Acceptable leakage current from signal pin into the open collector driver (neg = from converter) Converter guaranteed ON when control pin is less than Vil (max) Converter guaranteed OFF when control pin is greater than Vih (max) 500 µA Acceptable high level leakage current Low level input voltage Iih (leakage) -10 µA ViI 0 0.4 V High level input voltage Vih 2.5 V Reliability and Service Life Characteristic Mean time between failure Symbol MTBF Min 551,000 Typ Max Units Hours Notes and Conditions MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25ºC; ground benign environment Telcordia SR-332 Demonstrated. This entry will be periodically updated as the number of test hours increase Mean time between failure Mean time between failure MTBF MTBF 9,009,000 TBA Hours Hours 3 www.artesyn.com File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated Other Specifications Characteristic Switching frequency Weight Symbol Fsw Min Typ 300 2.5 Max Units kHz g Notes and Conditions Fixed frequency EMC Electromagnetic Compatibility Phenomenon Immunity: Conducted immunity Radiated immunity ESD Enclosure EN61000-4-6 EN61000-4-3 EN61000-4-2 6kV contact 8kV air NP As per ETS 300 386-1 table 5 Port Standard Test level Criteria Notes and conditions Safety Agency Approvals Standard IEC60950 UL/cUL CAN/CSA 22.2 No. 60950-00 : UL60950 TÜV Product Service CB Certificate No Category EN60950 File No. E174104 Certificate No. B 03 10 38572 037 DE3-51686M1 Material Ratings Characteristic - Signal Name Notes and Conditions Flammability rating UL9V-0 Model Numbers Model Number SIL05E-05W3V3-VJ Note: Efficiency at 5Vin, 3V3 Vout Input Voltage 3.0- 5.5 Vdc Output Voltage 0.75-3.63 Vdc Output Current (Max.) 5A Typical Efficiency 94.0% Max. Load Regulation ±1.0% RoHS Compliance Ordering Information The ‘J’ at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 4 File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | 5 A DC-DC Converter E Class Non-Isolated W3V3 Model Input Characteristics Characteristic Input current - operating Symbol Iin Iin (ripple) Cinput Cbypass 100 Min Typ 3.5 Max 3.9 Units A DC Notes and Conditions Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Iout = Iout (max.), measured without external filter Internal to converter Reflected ripple current 40 mA rms Input capacitance internal filter Input capacitance external bypass 9.4 µF µF Recommended customer added capacitance W3V3 Model Electrical Characteristics - O/P Characteristic Nominal set-point voltage Total regulation band Symbol Vo (nom) Vo Min 3.24 3.19 Typ 3.30 Max 3.36 3.41 Units V DC V DC Notes and Conditions Vin = Vin (nom); Iout = Iout (max) For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Vin = Vin (nom); Iout (min) to Iout (max) Load regulation 1 % Output current continuous Output current - short circuit Iout Isc Vp-p Vrms 0 10 5 20 A DC A rms Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 75 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 142 for measurement set-up details 5 www.artesyn.com File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated W3V3 Model Electrical Characteristics - O/P Characteristic Load transient response peak deviation Load transient response recovery Trecovery 50 µsec Symbol Vdynamic Min Typ 60 Max Units mV Notes and Conditions Peak deviation for 50% to 75% step load, di/dt = 100 mA/µsec. Settling time to within 1% of output set point voltage for 50% to 75% step load. External load capacitance Cext 0 10,000 µF W3V3 Model Protection and Control Features Characteristic Allowable output voltage Symbol Min Typ Max 384 Units % Notes and Conditions Trim up (% of Vo nom) = 0.75V See Application Note 142 for details of trim equations and trim curves W3V3 Model Efficiency Characteristic Efficiency Symbol η η Min 92 Typ 94 Max Units % Notes and Conditions Iout = 100% Iout (max), Vin = 5V Iout = 50% Iout (max), Vin = 5V Efficiency 93 95 % 6 File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | 5 A DC-DC Converter E Class Non-Isolated W3V3 Model OUTPUT CURRENT (A) 6 EFFICIENCY (%) 95 5 4 3 2 1 0 5 15 25 35 45 55 65 75 85 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 94 93 4.5 5.0 INPUT VOLTAGE (V) Figure 2: Efficiency vs Line (Vo = 3.3V) 5.5 AMBIENT TEMPERATURE (ºC) Figure 1: De-rating Curve (Vo = 3.3V) 96 EFFICIENCY (%) 95 94 93 92 91 1.0 1.5 Nom Line High Line Low Line 2.0 2.5 3.0 3.5 4.0 4.5 5.0 OUTPUT CURRENT (A) Figure 3: Efficiency vs Load (Vo = 3.3V) Figure 4: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) Figure 5: Control On/Off Characteristic (Channel 2 Remote ON/OFF: , Channel 1: Vo) Figure 6: Typical Transient Response 50% - 75% Step Load Change (Channel 1: Vo, Channel 4: Io) 7 www.artesyn.com File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated W3V3 Model Figure 7: Typical Ripple and Noise (Channel 1: Vo) 8 File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | 5 A DC-DC Converter E Class Non-Isolated 0.902 [22.90] 0.279 [7.09] 0.402 [10.21] 5 4 3 2 1 0.050 [1.27] 0.100 [2.54] 0.025[0.64] x 0.025[0.64] Connector 5 places 0.150 [3.81] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated Pin Connections Pin No. 1 2 3 4 5 Function Vout Trim GND Vin Remote ON/OFF Figure 8: Mechanical Drawing and Pinout Table 9 www.artesyn.com File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated Note 1 Thermal reference is defined as the highest temperature measured at any one of the specified thermal reference points. See Figure 9: Thermal Reference Points. Thermal Ref Points Note 2 The Remote ON/OFF pin is referenced to ground. Note 3 The SIL05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL05E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >2.5V] Converter Operation Unit is ON Unit is ON Unit is OFF Direction of Airflow A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘-R’ at the end of the model number, e.g. SIL05E-05W3V3-VRJ. Figure 9: Thermal Reference Points Note 4 Thermal reference set up: Unit mounted on an edge card test board 203mm x 190mm. Test board mounted vertically. For test details and recommended set-up see Application Note 142. Note 5 Max 69ºC for full load in still air. Note 6 For SIL05E-05W3V3 minimum operating voltage is 4.5V, for Vo = 3V3 CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals. 10 File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004 SIL05E Series | 5 A DC-DC Converter E Class Non-Isolated NORTH AMERICA e-mail: sales.us@artesyn.com ¤ 800 769 7274 ¤ + 508 628 5600 EUROPEAN LOCATIONS e-mail: sales.europe@artesyn.com IRELAND ¤ + 353 24 93130 AUSTRIA ¤ + 43 1 80150 FAR EAST LOCATIONS e-mail: sales.asia@artesyn.com HONG KONG ¤ + 852 2699 2868 Longform Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 11 www.artesyn.com File Name: lf_sil05e_05.pdf Rev (01): 23 Mar 2004