SIL10-05S2V0-V

SIL10 Series DC/DC CONVERTERS • • • • • • Single output 1 NEW Product 8 to 33W Non-isolated DC/DC Converters Current rating of 10A Outputs of between 0.8V to 3.3V - fixed and flexible Applications for 5V or 3.3V input POL converters Highest power density available today (117W/in3) High efficiency - up to 96% achievable on 3.3 Vout POL converter that saves board space - vertical or horizontal versions • Industry standard footprint • Remote sense and remote ON/OFF The SIL10 series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or 3.3V input to output voltages of 0.8V to 3.3V. The SIL10 offers both fixed outputs and wide output trim range which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIL10 series from existing 5V or 3.3V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIL10 is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10 offers compact size and efficiencies of up to 96%. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability Fixed output versions 5Vin with wide trim 3.3Vin with wide trim ±10% 3.6V to 0.8V 2.75V to 0.8V ±2.7% ±1.0% ±1.0% 0A None 50mV pk-pk 25mV rms max. ±0.01%/ºC 50mV max. deviation 50µs recovery to within ±1.0% 10% Vo compensation EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise 0 to 20MHz BW Temperature co-efficient Transient response GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards (pending) Material flammability Dimensions Pin length Weight MTBF Telecordia 332 (LxWxH) Vertical Fixed See table Non-isolated 300kHz typ. EN60950 UL/cUL60950 UL94V-0 50.8 x 7.8 x 12.7mm 2.0 x 0.31 x 0.5 inches 0.135 ±0.02 in (3.43 ±0.5mm) 5g (0.18oz) 7,042,000 Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input current ripple Remote ON/OFF Start-up time No load 3.0 to 5.5VDC 70mA 8A max. @ Io max. and Vout = 3.3V 65mA rms (See Note 3) 20ms ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, (See Note 4) Non-operating -40ºC to +100ºC -40ºC to +125ºC International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL60950 file No. E174104 TÜV TÜV Product Service (EN60950) Certificate No. TBC. CB report and certificate to IEC60950 File Name: SIL10.PDF Rev: 02 Jan 2003 SIL10 Series DC/DC CONVERTERS OUTPUT POWER (MAX.) 36.3W 36.3W 27.5W 22W 19.8W 16.5W 13.2W 11W 8.8W Notes 1 Single output 2 NEW Product 8 to 33W Non-isolated DC/DC Converters For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MIN.) 0A 0A 0A 0A 0A 0A 0A 0A 0A OUTPUT CURRENT (MAX.) 10A 10A 10A 10A 10A 10A 10A 10A 10A INPUT VOLTAGE 4.5V - 5.5V 4.5V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V OUTPUT VOLTAGE 3.3V 3.3V 2.5V 2.0V 1.8V 1.5V 1.2V 1.0V 0.8V EFFICIENCY (TYP.) 95% 95% 94% 93% 92% 90% 88% 87% 84% REGULATION LINE ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% LOAD ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% MODEL NUMBER (1, 2) SIL10-05W3V3-V SIL10-05S3V3-V SIL10-05S2V5-V SIL10-05S2V0-V SIL10-05S1V8-V SIL10-05S1V5-V SIL10-05S1V2-V SIL10-05S1V0-V SIL10-05S0V8-V PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery 2 3 4 The part numbers with a W in the number sequence indicate a wide trim output. For the SIL10-05W3V3 the output voltage range is from 3.6V to 0.8V. The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL10-05S2V0-H. Referenced to ground for shutdown. If pin 6 is high unit will shutdown. If pin 6 is open unit will operate as normal. Converter is guaranteed OFF when control pin is greater than 1.2V. Full de-rating curves available in both the Long Form Data Sheet and Application Note 134. CAUTION: High internal temperatures. Ensure that unit is not user accessible. EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. J1 PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 FUNCTION +Vout +Vout Remote Sense (+) +Vout Ground J2 PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 FUNCTION Ground +Vin +Vin No Pin Trim Remote ON/OFF J1 Pin 5 TRIM UP J2 Pin 5 TRIM DOWN J1 Pin 3 J1 Pin 5 J2 Pin 5 10KΩ TRIMPOT J1 Pin 3 Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: SIL10.PDF Rev: 02 Jan 2003 SIL10 Series DC/DC CONVERTERS Single output 3 NEW Product 8 to 33W Non-isolated DC/DC Converters For the most current data and application support visit www.artesyn.com/powergroup/products.htm PIN VIEW 2.000 ±0.020 (50.80 ±0.50) SIDE VIEW PCB 0.500 (12.70) 6 5 3 J2 2 1 5 43 J1 2 1 0.316 ±0.008 (8.03 ±0.20) 0.170 (4.32) 0.100 (2.54) 1.900 (48.26) 0.050 (1.27) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 1: Mechanical Drawing - Horizontal Mount Version SIDE VIEW 0.307 ±0.008 (7.80 ±0.20) PCB FRONT VIEW 2.000 ±0.020 (50.80 ±0.50) 0.500 (12.70) 0.135 (3.43) 0.635 (16.13) 1 2 3 J1 4 5 1 2 3 J2 5 6 0.168 (4.26) 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet © Artesyn Technologies® 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: SIL10.PDF Rev: 02 Jan 2003