SIL15C-05SADJ-V

SIL15C Series DC/DC CONVERTERS • • • • C Class Non-isolated 5Vin and 12Vin single output 1 NEW Product 15A current rating Input voltage range: 4.5V - 5.5V or 10.2V - 13.8V Output voltage range: 0.9V - 5.0V Industry leading value • Cost optimised design • Excellent transient response • Output Voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time • Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332 The SIL15C Series is a new high density open frame non-isolated converter for spacesensitive applications. Each model has a wide input range (4.5V to 5.5V or 10.2V to 13.8V) and offer a wide 0.9V to 3.3V/5V output voltage range with a 15A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the maximum allowed value for that model. Typical efficiencies are 89% for the 5V input version and 91% for the 12V input version. The SIL15C series offers remote ON/OFF and over-current protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL15C reduces compliance costs and time to market. All specifications are typical at nominal input, full load at 25°C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 5) 5V input models 12V input models 0.9V to 3.3V 0.9V to 5.0V ±2.5% ±0.2% max. ±0.5% max. 0A/15A 5V input models 12V input models 3% max. 1% max. 100mV max. (See Note 1) Deviation See table 100mV 200µs recovery to within regulation band INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold 5Vin 12Vin 5Vin 12Vin 4.5VDC 9.0VDC 4.3VDC 7.5VDC Output setpoint accuracy With 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot (at turn on) Undershoot Ripple and noise 5Hz to 20MHz Transient response (See Note 2) Low line to high line Full load to min. load GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF Telcordia SR-332 Fixed (See Note 4) See Table 200kHz TÜV Product Services IEC60950, UL/cUL60950 UL94V-0 14.2g (0.5oz) 7,817,294 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 3) Input reflected ripple (See Note 4) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 9) Power up Remote ON/OFF 5V input model 12V input model Minimum load Remote OFF 5V input model 12V input model 5V input model 12V input model 4.5 to 5.5VDC 10.2 to 13.8VDC 65mA 20mA 11.5A @ Io max. 8.1A @ Io max. 200mA (pk-pk) 200mA (pk-pk) Active high >2.4VDC