SIL15E-12W3V3-VJ

ARTESYN SIL15E SERIES Non-Isolated DC-DC Converters Advanced Energy's Artesyn SIL15E series of non-isolated DC-DC converters comprises four SIL15E_05V models and a single SIL15_12V model. The SIL15E_12V converter accepts a 10 to 14 Vdc input and provides an output that can be adjusted over the range 0.8 to 3.63 Vdc. It can deliver up to 15 amps output current. Depending on the particular model, SIL15E series converters offer output power ratings of to 54.4 watts and conversions efficiencies as high as 94%. Standard features include remote On/Off, remote sense and comprehensive protection against short-circuit and overtemperature conditions. Packaged as through-hole vertical mount modules with a single-in-line footprint of just 0.3 x 2 inches (7.8 x 50.8 mm), SIL15E series converters have an installed height of 0.5 inch (12.7 mm). SPECIAL FEATURES SAFETY  15 A current rating  UL, cUL CAN/CSA 22.2 No. E174104  Input voltage range: 10 - 14 Vdc  UL6950 File No. E174104  Output voltage range: 0.8 - 3.63 V  TÜV Product Service (EN60950)  Ultra high efficiency: 94% @ 12 Vin and 3.3 Vout  Extremely low internal power DATA SHEET Total Power: 49.5 Watts Input Voltage: 10 - 14 Vdc # of Outputs: Single Certificate No. B 03 10 38572 037  CB report and certificate to DE3-51686M1 dissipation  Minimal thermal design concerns  Designed-in reliability: MTBF of >7 million hours per Telcordia SR-332  Ideal solution where board space is at a premium or tighter card pitch is required  Industry standard footprint and pinout  Available RoHS compliant  Two year warranty ©2021 Advanced Energy Industries, Inc. SIL15E_12 SERIES ELECTRICAL SPECIFICATIONS Input Input voltage ra­nge Input current 10 - 14 Vdc No load 70 mA Input current (max.) 5.5 A @ lo max. and Vout = 3.3 V Input current ripple 60 mA rms Remote ON/OFF See Note 1 Start-up time 35ms Output Voltage adjustability 0.8 - 3.63 Vdc Setpoint accuracy ±0.4% typical Line regulation ±0.2% typical Load regulation ±1.0% typical Total error band ±3.0% typical Minimum load 0A Overshoot/undershoot Ripple and noise None 5 - 20 MHz 60 mV pk-pk 25 mV rms max. Temperature coefficient ±0.01% / °C Transient response 100 mV max deviation 50 μs recovery to within ±1.0% Remote sense 10% Vo compensation Short circuit protection Continuous Thermal protection Automatic recovery All specifications are typical at nominal input, full load at 25°C unless otherwise stated. GENERAL SPECIFICATIONS Efficiency See Table Insulation voltage Switching frequency Non-isolated Fixed 200 kHz typical Approvals and standards EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions (vertical model) LxWxH 50.8 x 7.8 x 12.7 mm 2.0 x 0.31 x 0.5 inches Pin length 0.135 ± 0.02 inches 3.43 ± 0.5 mm Weight 5 g (0.18 oz) MTBF 2 advancedenergy.com Telcordia SR-332 7,042,000 hours SIL15E_12 SERIES EMC CHARACTERISTICS Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient temperature -40 °C to +85 °C (See Note 2) Non-operating temperature -40 °C to +125 °C ORDERING INFORMATION Model (3) Number Output Power (Max.) Input Voltage Output Voltage SIL15E-12W3V3-VJ 49.5 W 10 - 14 Vdc 0.8 - 3.63 Vdc Output Current Output Current (Min.) (Max.) 0A 15 A Regulation Efficiency (Typical) Line Load 94% ±0.2% ±1.0% PART NUMBER SYSTEM WITH OPTIONS Product Family Rated Output Current Performance SIL 15 E SIL = Single In Line 15 = 15 Amps E = Enhanced Performance - Input Voltage Type of Output Output Voltage 12 W 3V3 12 = 10 - 14 Vdc W = Wide 0.8 - 3.63 Vdc - Mounting Option Packaging Options V J V = Vertical H = Horizontal J=P  b free (RoHS 6/6 compliant) advancedenergy.com 3 SIL15E_12 SERIES OUTPUT VOLTAGE ADJUSTMENT The ultra-wide output voltage trim range offers major advantages to users who select the SIL15E-12W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SIL15E12W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes: 1. T  he SIL15E features an ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL15E: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low [Von/off 1.6 V] Unit is ON An ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ towards the end of the model number, e.g. SIL15E-12W3V3-VRJ. 2. F ull derating curves available in both the Longform Datasheet and Application Note. 3. N OTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative. MECHANICAL DRAWINGS SIDE VIEW FRONT VIEW 2.000 (50.80) 0.307 (7.80) 0.500 (12.70) PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 4 5 1 2 J1 0.168 (4.26) 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) ALL DIMENSIONS IN INCHES (MM) Pin Assignments J1 Pin Function 1 +Vout 2 +Vout 3 Remote Sense (+) 4 +Vout 5 Ground Pin Function 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF J1 4 advancedenergy.com 3 J2 5 6 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. For international contact information, visit advancedenergy.com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. ENG-SIL15E_12 SERIES-235-01 1.07