SMT05E-05W3V3J

SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated SMT05E SERIES 0.75 Vin to 3.63 Vin Single output 5 A current rating Output voltage range: 0.75 Vdc to 3.63 Vdc Applications for 5 V or 3.3 V input POL converters High power density (191 W/in3) High efficiency - typically 94% for 5 Vin and 3.3 V out SMT POL converter that saves board space Industry standard footprint Remote ON/OFF Available RoHS compliant THE SMT05E series are non-isolated SMT dc-dc converters packaged in an industry standard footprint giving designers a cost effective solution for conversion from either a 5 V or 3.3 V input to output voltages of 3.63 Vdc and 0.75 Vdc. The SMT05E offers a wide output range, which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SMT05E series from existing 5 V or 3.3 V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SMT05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SMT05E offers compact size and efficiencies of up to 94%. [ 2 YEAR WARRANTY ] 1 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Input voltage - continuous Input voltage - peak/surge Operating temperature Symbol Vin (cont) Vsurge Top Min -0.3 -0.3 -40 Typ Max 5.5 6 85 Units V dc V dc ºC Notes and Conditions Vin(+) - Vin(-) 2s max, non-repetitive Measured at thermal reference points, see Note 5 for thermal derating Storage temperature Output power (W3V3) Tstorage Pout (max) -40 0 125 18.15 ºC W All specifications are typical at nominal input Vin = 5V, full load under any resistive load combination at 25 ˚C unless otherwise stated. Input Characteristics Characteristic Input voltage - operating Input current - no load Input current - quiescent Inrush current (i2t) Input ripple current Input fuse* *See Application Note 146 for manufacturer and part number Symbol Vin (oper) lin lin (off) linrush Min 3 Typ 5 70 2 0.04 40 6 Max 5.5 150 Units V dc mA dc mA dc A2s mA rms A Notes and Conditions See Note 6 Vin (min) - Vin (max), enabled Converter disabled Complies with ETS300 132 Part 4.7, with recommended LISN Slowblow/antisurge HRC recommended Turn On/Off Characteristic Input voltage - turn on Turn on delay - enabled, then power applied Symbol Vin (on) Tdelay (power) Min 2 Typ 2.70 20 Max 3 Units V dc msec Notes and Conditions Will regulate @ Vin >3V if Vout ≤ 2.5 V With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band From 10% to 90%; full resistive load, no external capacitance Turn on delay - power applied, then enabled Tdelay (enable) 20 msec Rise time Trise 15 msec 2 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated Signal Electrical Interface Characteristic - Signal Name Symbol At remote/control ON/OFF pin High level input current Iih Min Typ Max Units Notes and Conditions See Notes 2 and 3 Current flowing into control pin when pin is pulled high (max at Vih = 5.5 V Acceptable leakage current from signal pin into the open collector driver (neg = from converter) Converter guaranteed ON when control pin is less than Vil (max) Converter guaranteed OFF when control pin is greater than Vih (max) 500 µA Acceptable high level leakage current Low level input voltage Iih (leakage) -10 µA ViI 0 0.4 V High level input voltage Vih 2.5 V Reliability and Service Life Characteristic Mean time between failure Symbol MTBF Min 551,000 Typ Max Units Hours Notes and Conditions MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25 ºC; ground benign environment Telcordia SR-332 Mean time between failure MTBF 9,009,000 Hours 3 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated Other Specifications Characteristic Switching frequency Weight Coplanarity Symbol Fsw Min Typ 300 2.8 100 Max Units kHz g µm Measured from seating plane Notes and Conditions Fixed frequency EMC Electromagnetic Compatibility Phenomenon Immunity: Conducted immunity Radiated immunity ESD Enclosure EN61000-4-6 EN61000-4-3 EN61000-4-2 6 kV contact NP 8 kV air As per ETS 300 386-1 table 5 Port Standard Test level Criteria Notes and conditions Safety Agency Approvals Standard IEC60950 UL/cUL CAN/CSA 22.2 No. 60950-00 : UL60950 TÜV Product Service CB Certificate No Category EN60950 File No. E174104 Certificate No. B 03 10 38572 037 DE3-51686M1 Material Ratings Characteristic - Signal Name Notes and Conditions Flammability rating UL94V-0 Model Numbers Model Number SMT05E-05S1V5J SMT05E-05W3V3J* Note: Efficiency at 5 Vin, 3V3 Vout Input Voltage 3.0-5.5 Vdc 3.0-5.5 Vdc Output Voltage 1.5 V 0.75-3.63 V Output Current (Max.) 5A 5A Typical Efficiency 87.5% 94.0% Max. Load Regulation ±1.0% ±1.0% RoHS Compliance Ordering Information The ‘J’ at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 4 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated S1V5 Model Input Characteristics Characteristic Input current - operating Symbol Iin Iin (ripple) Cinput Cbypass 100 Min Typ 1.7 Max 1.9 Units A dc Notes and Conditions Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Iout = Iout (max.), measured without external filter Internal to converter Reflected ripple current Input capacitance internal filter Input capacitance external bypass 15 9.3 mA rms µF µF Recommended customer added capacitance S1V5 Model Electrical Characteristics - O/P Characteristic Nominal set-point voltage Total regulation band Symbol Vo (nom) Vo Min 1.46 1.44 Typ 1.50 Max 1.53 1.56 Units V dc V dc Notes and Conditions Vin = Vin (nom); Iout = Iout (nom) For all line, static load and temperature until end of life Iout = Iout (nom); Vin (min) to Vin (max) Vin = Vin (nom); Iout (min) to Iout (max) Line regulation 1 % Load regulation 1 % Output current continuous Output current - short circuit Iout Isc Vp-p Vrms 0 10 5 20 A DC A rms Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 60 10 75 20 mV pk-pk Measurement bandwidth: 20 MHz. See Application Note mV rms 146 for measurement set-up details 5 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated S1V5 Model Electrical Characteristics - O/P Characteristic Load transient response peak deviation Symbol Vdynamic Min Typ 60 Max Units mV Notes and Conditions Peak deviation for 50% to 75% step load, di/dt = 100 mA/µsec. Measurement taken with no external capacitors Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors Load transient response recovery Trecovery 50 µsec External load capacitance Cext 10,000 µF S1V5 Model Protection and Control Features Characteristic Allowable output voltage trim range Symbol Min 90 Typ Max 110 Units % Notes and Conditions Trim up (% of Vo nom). Vo = 1.5 V. Note that the maximum output power is still 8.25 W. Derate the maximum output current accordingly. S1V5 Model Efficiency Characteristic Efficiency Symbol η η Min 85.5 Typ 87.5 Max Units % Notes and Conditions Iout = 100% Iout (max), Vin = Vin (5V) Iout = 50% Iout (max), Vin = Vin (5V) Efficiency 88.4 90.4 % 6 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated W3V3 Model Input Characteristics Characteristic Input current - operating Symbol Iin Iin (ripple) Cinput Cbypass 100 Min Typ 3.5 Max 3.9 Units A dc Notes and Conditions Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Iout = Iout (max.), measured without external filter Internal to converter Reflected ripple current 40 mA rms Input capacitance internal filter Input capacitance external bypass 9.4 µF µF Recommended customer added capacitance W3V3 Model Electrical Characteristics - O/P Characteristic Nominal set-point voltage Total regulation band Symbol Vo (nom) Vo Min 3.24 3.19 Typ 3.30 Max 3.36 3.41 Units V dc V dc Notes and Conditions Vin = Vin (nom); Iout = Iout (max) For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Vin = Vin (nom); Iout (min) to Iout (max) Load regulation 1 % Output current continuous Output current - short circuit Iout Isc Vp-p Vrms 0 10 5 20 A dc A rms Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 75 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 146 for measurement set-up details 7 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated W3V3 Model Electrical Characteristics - O/P Characteristic Load transient response peak deviation Load transient response recovery Trecovery 50 µsec Symbol Vdynamic Min Typ 30 Max Units mV Notes and Conditions Peak deviation for 50% to 75% step load, di/dt = 100 mA/µsec. Settling time to within 1% of output set point voltage for 50% to 75% step load. External load capacitance Cext 0 10,000 µF W3V3 Model Protection and Control Features Characteristic Allowable output voltage Symbol Min Typ Max 384 Units % Notes and Conditions Trim up (% of Vo nom) = 0.75 V See Application Note 146 for details of trim equations and trim curves W3V3 Model Efficiency Characteristic Efficiency Symbol η η Min 92 Typ 94 Max Units % Notes and Conditions Iout = 100% Iout (max), Vin = 5 V Iout = 50% Iout (max), Vin = 5 V Efficiency 93 95 % 8 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated S1V5 Model 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 15 25 35 45 55 65 75 85 OUTPUT CURRENT (A) 88.0 EFFICIENCY (%) 87.5 87.0 86.5 86.0 3.0 3.5 4.9 4.5 5.0 5.5 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) AMBIENT TEMPERATURE (ºC) Figure 1: Derating Curve (Vo = 3.3 V) INPUT VOLTAGE (V) Figure 2: Efficiency vs Line (Vo = 3.3 V) 93 EFFICIENCY (%) 91 89 87 85 1 2 3 4 5 Low Line Nom Line High Line OUTPUT CURRENT (A) Figure 3: Efficiency vs Load (Vo = 3.3 V) Figure 4: Typical Power-up Characteristic (Channel 1: Vin, Channel 2: Vo) Figure 5: Control On/Off Characteristic (Channel 1 Remote ON/OFF: , Channel 2: Vo) Figure 6: Typical Transient Response 50% - 100% Step Load Change (Channel 1: Vo, Channel 4: Io) 9 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated S1V5 Model Figure 7: Typical Ripple and Noise (Channel 1: Vo) 10 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated W3V3 Model 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 15 25 35 45 55 65 75 85 OUTPUT CURRENT (A) 96 EFFICIENCY (%) 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 95 94 93 4.5 5.0 INPUT VOLTAGE (V) Figure 9: Efficiency vs Line (Vo = 3.3 V) 5.5 AMBIENT TEMPERATURE (ºC) Figure 8: Derating Curve (Vo = 3.3 V) 97 EFFICIENCY (%) 96 95 94 93 92 91 1 2 3 4 5 Low Line Nom Line High Line OUTPUT CURRENT (A) Figure 10: Efficiency vs Load (Vo = 3.3 V) Figure 11: Typical Power-up Characteristic (Channel 1: Vo, Channel 2: Vin) Figure 12: Control On/Off Characteristic (Channel 1 Remote ON/OFF: , Channel 2: Vo) Figure 13: Typical Transient Response 50% - 100% Step Load Change (Channel 1: Vo, Channel 3: Io) 11 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated W3V3 Model Figure 14: Typical Ripple and Noise (Channel 1: Vo) 12 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated 0.160 (4.06) 0.190 (4.83) 0.450 (11.43) 0.160 (4.06) 0.180 (4.57) 0.350 (8.90) 4 3 2 0.340 (8.64) TOP VIEW 5 0.800 (20.32) BOTTOM VIEW 0.050 (1.26) 1 0.041 (1.04) 0.060 (1.52) 0.264 [6.70] 0.062 (1.57) SIDE VIEW CONNECTOR (5PL) LENGTH 0.090 (2.29) WIDTH 0.062 (1.57) SEATING PLANE All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated Pin Connections Pin No. 1 2 3 4 5 Function Remote ON/OFF Vout Trim GND +Vin Figure 15: Mechanical Drawing Pinout Table 13 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 SMT05E Series | SXA10 Series |Converter 5 A DC-DC 15W DC/DC E Class Non-Isolated Note 1 Thermal reference is defined as the highest temperature measured at any one of the specified thermal reference points. See Figure 16: Thermal reference points. Case Temperature Should Not Exceed 115ºC Note 2 The Remote ON/OFF pin is referenced to ground. Note 3 The SMT05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >2.5 V] Converter Operation Unit is ON Unit is ON Unit is OFF Direction of Airflow A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please use part number SMT05E-05W3V3-R or SMT05E-05W3V3-RTJ. Figure 16: Thermal Reference Points Note 4 Thermal reference set up: Unit mounted on an edge card test board 203 mm x 190 mm. Test board mounted vertically. For test details and recommended set-up see Application Note 146. Note 5 Max 75 ºC for full load in still air. Note 6 For SMT05E-05W3V3 minimum operating voltage is 4.5 V, for Vo = 3.3 V CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals. 14 File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005 Preliminary Data - subject to change without notice SMT05E Series | 5 A DC-DC Converter E Class Non-Isolated NORTH AMERICA e-mail: sales.us@artesyn.com ¤ 800 769 7274 ¤ + 508 628 5600 EUROPEAN LOCATIONS e-mail: sales.europe@artesyn.com IRELAND ¤ + 353 24 93130 AUSTRIA ¤ + 43 1 80150 FAR EAST LOCATIONS e-mail: sales.asia@artesyn.com HONG KONG ¤ + 852 2699 2868 Longform Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 15 www.artesyn.com File Name: lf_smt05e_05.pdf Rev (02): 23 Dec 2005