SMT06C-12SADJJ

SMT06C Series DC-DC CONVERTERS • • • • • • C Class Non-isolated 5 Vin and 12 Vin single output 1 NEW Product • • 6 A current rating Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 3.3/5.0 Vdc Industry leading value • Cost optimized design Excellent transient response Output voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 Available RoHS compliant The SMT06C series is a new high density open-frame, non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 6 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The series offers remote ON/OFF and overcurrent protection as standard. With full international safety approvals including EN60950 and Ul/cUL60950, the SMT06C reduces compliance costs and time to market. All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 6) 5 Vin 12 Vin 0.9-3.3 Vdc 0.9-5.0 Vdc ±2.5% ±0.2% ±0.5% 0 A/6 A 5 Vin 12 Vin At turn-off (See Note 2) 3.0% max. 1.0% max. 100 mV max. See Table on page 2 75 mV max. deviation 150 µs recovery to within regulation band INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold 5 Vin 12 Vin 5 Vin 12 Vin 4.5 Vdc typ. 9.3 Vdc typ. 4.3 Vdc typ. 7.8 Vdc typ. Output setpoint accuracy 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot (at turn-on) Undershoot Ripple and noise 5 Hz to 20 MHz Transient response (See Note 1) Low line to high line Full load to min. load GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards Material flammability Weight Coplanarity MTBF Telcordia SR-332 Fixed (See Note 4) See Table on page 2 200 kHz TÜV Product Services IEC60950, UL/cUL60950 UL94V-0 9.3 g (0.3 oz) 150 µm 7,562,142 hours INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 8) Input reflected ripple (See Note 2) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) Power-up Remote ON/OFF 5 Vin 12 Vin Min load Remote OFF 5 Vin 12 Vin 5 Vin 12 Vin 4.5-5.5 Vdc 10.2-3.8 Vdc 50 mA 5mA 5.1 A max. @ Io max. 1.6 A @ lo max. 52 mA (pk-pk) 56 mA (pk-pk) Positive logic >2.4 Vdc