SMT15E-12V

SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters SMT15E-12V SERIES 0.8 Vin to 3.63 Vin Single output 15 A Current rating Input voltage range: 10.0 Vdc - 14.0 Vdc Output voltage range: 0.8 Vdc - 3.63 Vdc Ultra high efficiency: 94% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 6,920,000 hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard surface-mount footprint Available RoHS compliant THE SMT15E-12 series are non-isolated dc-dc converters packaged in a single-inline footprint giving designers a cost effective solution for conversion from a 10 Vdc to 14 Vdc input to output voltages of 0.8 Vdc to 3.63 Vdc. The SMT15E-12 offers a wide outputs trim range, which allows maximum design flexibility and a pathway for future upgrades. The SMT15E-12 is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SMT15E-12 offers compact size and efficiencies of up to 94% [ 2 YEAR WARRANTY ] 1 File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SXA10 | SMT15E Series Series15| A15W DC/DC DC-DC E Class Non-Isolated DC-DC Converters Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Input voltage - continuous Input voltage - peak/surge Operating temperature Symbol Vin (cont) Vsurge Top Tstorage Pout (max) Min -0.3 -0.3 -40 Typ Max 14 14.5 85 Units V DC V DC ºC Notes and Conditions Vin(+) - Vin(-) 2s max, non-repetitive Measured at thermal reference points, see Note 1 Storage temperature Output power (3.3V) -40 125 49.5 ºC W All specifications are typical at nominal input Vin = 12V, full load under any resistive load combination at 25˚C unless otherwise stated. Input Characteristics Characteristic Input voltage - operating Input current - no load Input current - quiescent Inrush current (i2t) Input ripple current Input fuse* Symbol Vin (oper) lin lin (off) linrush Min 10 Typ 12 70 7 0.1 120 6 Max 14 100 Units V DC mA DC mA DC A2µs mA rms A Vin (min) - Vin (max), enabled Converter disabled Complies with ETS300 132 Part 4.7, with recommended LISN Slowblow/antisurge HRC recommended* Notes and Conditions *See Application Note 142 for manufacturer and part number Turn On/Off Characteristic Input voltage - turn on Turn on delay - enabled, then power applied Symbol Vin (on) Tdelay (power) Min Typ Max 10 20 Units V DC msec Notes and Conditions Turn on delay - power applied, then enabled Tdelay (enable) 20 msec With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band From 10% to 90%; full resistive load, no external capacitance Rise time Trise 15 msec 2 File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters Signal Electrical Interface Characteristic - Signal Name Symbol At remote/control ON/OFF pin Open collector or equivalent compatible Control pin open circuit voltage Vih High level input current Iih Min Typ Max Units Notes and Conditions See Notes 2 and 3 See Application Note 142 for Remote ON/OFF details Iih = 0 µA; open circuit voltage Current flowing into control pin when pin is pulled high (max at Vih - 5.5V) Converter guaranteed ON when control pin is greater than Vih(min) or open cct. Acceptable leakage current from signal pin into the open collector driver (neg = from converter) Converter guaranteed OFF when control pin is less than Vil (max) volts or open cct. Vil = < 0.4 V 0 1 V mA High level input voltage Vih 1.6 Vin Acceptable high level leakage current Low level input voltage Iih (leakage) -10 µA ViI 0.8 V Low level input current IiI 20 µA Reliability and Service Life Characteristic Mean time between failure Symbol MTBF Min Typ 482,000 Max Units Hours Notes and Conditions MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25ºC; ground benign environment Telcordia SR-332 Demonstrated. This entry will be periodically updated as the number of test hours increase Mean time between failure Mean time between failure MTBF MTBF TBA 6,920,000 Hours Hours 3 www.artesyn.com File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SXA10 | SMT15E Series Series15| A15W DC/DC DC-DC E Class Non-Isolated DC-DC Converters Other Specifications Characteristic Switching frequency Weight Coplanarity Symbol Fsw Min Typ 200 7 100 Max Units kHz g µm Measured from seating plane Notes and Conditions Fixed frequency Environmental Specifications Characteristic Thermal performance Symbol Min -40 Typ Max 85 Units ºC Notes and Conditions See Note 5 and individual derating curves EMC Electromagnetic Compatibility Phenomenon Immunity: Conducted immunity Radiated immunity ESD Enclosure EN61000-4-6 EN61000-4-3 EN61000-4-2 6kV contact 8kV air NP As per ETS 300 386-1 table 5 Port Standard Test level Criteria Notes and conditions Performance criteria: NP: Normal Performance: EUT shall withstand applied test and operate within relevant limits as specified without damage. RP: Reduced Performance: EUT shall withstand applied test. Reduced performance is permitted within specified limits, resumption to normal performance shall occur at the cessation of the test. LFS: Loss of Function (self recovery): EUT shall withstand applied test without damage, temporary loss of function permitted during test. Unit will self recover to normal performance after test. Referenced ETSI standards: ETS 300 386-1 table 5 (1997): Public telecommunication network equipment, EMC requirements ETS 300 132-2 (1996): Power supply interface at the input to telecommunication equipment: Part 2 operated by direct current (DC) ETR 283 (1997): Transient voltages at interface A on telecommunication direct current (DC) power distributions 4 File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters Safety Agency Approvals Standard UL/cUL CSA 22.2 UL60950 TÜV Product Service EN60950 Category File No. E174104 Certificate No. B 02 12 382 72 035 Material Ratings Characteristic Flammability rating Notes and Conditions UL94V-0 Model Numbers Model Number SMT15E-12W3V3J Input Voltage 10.0-14.0 Vdc Output Voltage 0.8-3.63 Vdc Output Current (Max.) 15 A Typical Efficiency 93% @ full load Max. Load Regulation ±1.0% RoHS Compliance Ordering Information The ‘J’ at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 5 www.artesyn.com File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SXA10 | SMT15E Series Series15| A15W DC/DC DC-DC E Class Non-Isolated DC-DC Converters W3V3 Model Input Characteristics Characteristic Input current - operating Symbol Iin Iin (ripple) Cinput Cbypass 100 Min Typ 4.4 Max 4.5 Units A DC Notes and Conditions Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Iout = Iout (max.), measured without external filter Internal to converter Reflected ripple current 120 mA rms Input capacitance internal filter Input capacitance external bypass 18.8 µF µF Recommended customer added capacitance may be required on source impedance on customers applications W3V3 Model Electrical Characteristics - O/P Characteristic Nominal set-point voltage Total regulation band Symbol Vo (nom) Vo Min 0.785 Typ 0.8 3 Max 0.815 Units V DC % Notes and Conditions Vin = Vin (nom); Iout = Iout (nom) For all line, static load and temperature until end of life Iout = Iout (nom); Vin (min) to Vin (max) Vin = Vin (nom); Iout (min) to Iout (max) Line regulation 1 % Load regulation 1 % Output current continuous Output current - short circuit Iout Isc Vp-p Vrms 0 10 15 20 A DC A rms Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 80 25 mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 142 for measurement set-up details 6 File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters W3V3 Model Electrical Characteristics - O/P Characteristic Load transient response peak deviation Symbol Vdynamic Min Typ 100 Max Units mV Notes and Conditions Peak deviation for 50% to 75% step load, di/dt = 100 mA/µsec. Measurement taken with no external capacitors Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors Load transient response recovery Trecovery 100 µsec External load capacitance Cext 0 10,000 µF W3V3 Model Protection and Control Features Characteristic Allowable output voltage Symbol Min 0.8 Typ Max 3.63 Units V Notes and Conditions Trim up. Note that the maximum output power is still 49.5W. De-rate the maximum output current accordingly Open sense voltage 10 % W3V3 Model Efficiency Characteristic Efficiency Symbol η η Min 92 Typ 93 Max Units % Notes and Conditions Iout = 100% Iout (max), Vin = Vin (nom) Iout = 50% Iout (max), Vin = Vin (nom) Efficiency 93 94 % 7 www.artesyn.com File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SXA10 | SMT15E Series Series15| A15W DC/DC DC-DC E Class Non-Isolated DC-DC Converters W3V3 Model RATED OUTPUT POWER (%) 95 100 91 EFFICIENCY (%) 80 60 40 20 0 20 30 40 50 60 70 80 90 0 m/s (0 LFM) 1 m/s (200 LFM) 2 m/s (400 LFM) 87 83 79 75 1 3 5 7 9 11 13 15 OUTPUT CURRENT (A) Figure 2: Efficiency vs Load Vin = 10.0V Vin = 12.0V Vin = 14.0V AMBIENT TEMPERATURE (ºC) Figure 1: Derating Curve with Vin = 12V and No Trim (Vout = 0.8V) Figure 3: Short Circuit Characteristic (Channel 4: Is/c) Figure 4: Typical Transient Response 50% - 75% Step Load Change (Channel 2: Vo, Channel 4: Io) Figure 5: Typical Transient Response 75% - 50% Step Load Change (Channel 2: Vo, Channel 4: Io) Figure 6: Typical Power-up Characteristic (Channel 1: Vin, Channel 2: Vo) 8 File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters W3V3 Model Figure 7: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) Figure 8: Typical Ripple and Noise Vin = 12V, Vout = 3V3 and Iout = 15A (Channel 1: Vo) 9 www.artesyn.com File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SXA10 | SMT15E Series Series15| A15W DC/DC DC-DC E Class Non-Isolated DC-DC Converters TOP VIEW 0.039 (1.00) 0.039 (1.00) 0.530 ±0.010 (13.46 ± 0.25) BOTTOM VIEW 1.300±0.010 (33.02 ±0.25) 0.310 (7.87) 0.190 (4.83) 0.190 (4.83) 0.190 (4.83) 5 4 3 2 0.297 (7.54) 0.405 (10.29) 0.430 (10.92) 6 SIDE VIEW 0.323 (8.21) Installed Ht. 1 0.048 (1.22) 0.075 (1.91) 0.007 (0.18) Min Clearance Seating Plane All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated Max. component Connector (6PL) Width :0.112 ± 0.003 (2.84 ± 0.08) Length: 0.062 ± 0.002 (1.57 ± 0.04) Pin Connections Pin No. 1 2 3 4 5 6 Function Remote ON/OFF Remote Sense + Trim +Vout Ground +Vin Figure 9: Mechanical Drawing and Pinout Table 10 File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters Note 1 Thermal reference is defined as the highest temperature measured at any one of the specified thermal reference points. See Figure 10: Thermal reference points. Case Temperature should not exceed 115ºC Note 2 The Remote ON/OFF pin is referenced to ground. Note 3 The SMT15E-12 features an ‘Active High’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT15E: Configuration Remote pin open circuit Remote pin pulled low [Von/off 1.6V] Converter Operation Unit is ON Unit is OFF Unit is ON Direction of Airflow A an ‘Active Low’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. Figure 10: Thermal Reference Points Note 4 Thermal reference set up: Unit mounted on an edge card test board 203mm x 190mm. Test board mounted vertically. For test details and recommended set-up see Application Note 142. Note 5 Max 60ºC for full load in still air. See Application Note 142 for a detailed thermal Derating. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals. 11 www.artesyn.com File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006 SMT15E Series | 15 A DC-DC E Class Non-Isolated DC-DC Converters NORTH AMERICA e-mail: sales.us@artesyn.com ¤ 800 769 7274 ¤ + 508 628 5600 EUROPEAN LOCATIONS e-mail: sales.europe@artesyn.com IRELAND ¤ + 353 24 93130 AUSTRIA ¤ + 43 1 80150 FAR EAST LOCATIONS e-mail: sales.asia@artesyn.com HONG KONG ¤ + 852 2699 2868 Longform Datasheet © Artesyn Technologies® 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 12 www.artesyn.com File Name: lf_smt15e_12.pdf Rev (02): 04 Jan 2006