SMT30E-12W3V3-TJ

SMT30E Series 12 Vin Single Output DC-DC CONVERTERS • • • • • • • Non-isolated POL Converter NEW Product 1 30 A current rating Input voltage range: 8 Vdc to 14 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 91% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 3,289,053 hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard surface-mount footprint • Available RoHS compliant The SMT30E series are non-isolated dc-dc converters packaged in a surface-mount footprint giving designers a cost effective solution for conversion from a 12 V source. The SMT30E has a wide input range (8 Vdc to 14 Vdc) and offers a wide 0.8 Vdc to 3.63 Vdc output voltage range with a 30 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SMT30E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT30E offers compact size and efficiencies of up to 91%. All specifications are typical at 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated. Cout = 100 µF OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot/undershoot Ripple and noise Temperature coefficient Transient response Slew rate = 0.5 A/µs 1.5 Vout 5 Hz to 20 MHz 0.8-3.63 Vdc ±1.3% typ. ±0.2% typ. ±1.5% typ. ±3.0% typ. 0A None 60 mV pk-pk 25 mV rms ±0.01%/ºC 50% to 75% load step 3% max. deviation 10 µs recovery to within ±1.0% 10% Vo compensation GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions Weight Coplanarity MTBF INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Start-up time International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. EI74104 UL 60950 File No. EI74104 TÜV Product Service (EN60950) Certificate No. B05 06 38572 055 CB report and certificate to IEC60950 Patent No. 6,786,736 2 YEAR WARRANTY SPECIFICATIONS EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 @ 12 Vin, 3.3 Vout 91% typ. Non-isolated Fixed 1.3 MHz typ. EN60950-1 UL/cUL60950-1 UL94V-0 (LxWxH) 33.02 x 13.46 x 8.10 mm 1.3 x 0.53 x 0.319 inches 6.3 g (0.22 oz) 100 µm Remote sense Telcordia SR-332 3,289,053 hours 8-14 Vdc No load (max.) 250 mA 9.2 A max. @ Io max. and Vout = 3.3 V 220 mA rms (See Note 1) 20 ms ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, temperature Non-operating JEDEC J-STD-020C -40 ºC to +85 ºC -40 ºC to +125 ºC Level 3 MSL PROTECTION Short-circuit Thermal Continuous Automatic recovery File Name: smt30e_12.pdf Rev (02): 16 Dec 2005 SMT30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter NEW Product 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) 99 W OUTPUT CURRENT (MIN.) 0A OUTPUT CURRENT (MAX.) 30 A INPUT VOLTAGE 8-14 Vdc OUTPUT VOLTAGE 0.8-3.63 Vdc EFFICIENCY (MAX.) 91% REGULATION LINE ±0.2% LOAD ±1.5% MODEL NUMBER (2, 3) SMT30E-12W3V3J Part Number System with Options SMT30E-12W3V3-TJ Packaging Options (2) No ‘-T’ Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT30E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape and Reel e.g SMT30E-12W3V3-TJ Product Family SMT = Surface Mount Rated Output Current 30 = 30 Amps Performance E = Enhanced Performance Output Voltage 0.8 Vdc to 3.63 Vdc Type of Output W = Wide Input Voltage 12 = 8 Vdc to 14 Vdc Output Voltage Adjustment of the SMT30E-12W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT30E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT30E-12W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes 1 The SMT30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT30E: Configuration Remote pin open circuit Remote pin pulled low [Von/off < 0.8 V] Remote pin pulled high [Von/off >2.8 V] Converter Operation Unit is ON Unit is OFF Unit is ON Notes A The derating curves represent the condition at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. 2 3 A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ towards the end of the model number, e.g. SMT30E-12W3V3-TRJ. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: smt30e_12.pdf Rev (02): 16 Dec 2005 SMT30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter NEW Product 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (A) OUTPUT CURRENT (A) 40 40 30 0m/s 1m/s 2m/s 30 0m/s 1m/s 2m/s 20 20 10 10 0 0 20 40 60 80 0 0 20 40 60 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 1 - Derating Curve Vin = 12 V, Output Voltage = 1.0 V (See Note A) Figure 2 - Derating Curve Vin = 12 V, Output Voltage = 1.5 V (See Note A) OUTPUT CURRENT (A) OUTPUT CURRENT (A) 40 40 30 0m/s 1m/s 2m/s 30 0m/s 1m/s 2m/s 20 20 10 10 0 0 20 40 60 80 0 0 20 40 60 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 3 - Derating Curve Vin = 12 V, Output Voltage = 1.8 V (See Note A) Figure 4 - Derating Curve Vin = 12 V, Output Voltage = 2.5 V (See Note A) 100 EFFICIENCY (%) 80 60 40 20 0 0 5 10 15 20 25 30 Vout = 1.0V Vout = 1.5V Vout = 1.8V Vout = 2.5V Vout = 3.3V Vin Remote ON/OFF Cin 47µF Gnd 6 SMT30E 1 5 2 4 Remote sense + Vout 3 RTRIM Trim Load Cout 100µF (Required) OUTPUT CURRENT (A) Figure 5 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 6 - Standard Application File Name: smt30e_12.pdf Rev (02): 16 Dec 2005 SMT30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter NEW Product 4 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.039 [1.00] 0.430 [10.92] 0.530±0.010 [13.46±0.25] 0.039 [1.00] GND +Vout Trim Sense +Vin 1.300±0.010 [33.02±0.25] BOTTOM VIEW Remote ON/OFF 0.048 [1.22] SIDE VIEW SEATING PLANE 0.319 [8.10] max. INSTALLED HT. CONNECTOR (6 PL) WIDTH : 0.112 ±0.003 [2.84±0.08] LENGTH : 0.062 ±0.0016 [1.57±0.04] All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 FUNCTION Remote ON/OFF Remote Sense + Trim +Vout Ground +Vin Figure 7 - Mechanical Drawing and Pinout Table Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items:  Application Note www.artesyn.com File Name: smt30e_12.pdf Rev (02): 16 Dec 2005 0.405 [10.29] 0.075 [1.91] TOP VIEW 0.310 [7.87] 0.190 [4.83] 0.190 [4.83] 0.190 [4.83] 0.297 [7.54]