SSL20-7629J

SSL20 Series EXTERNAL AC/DC POWER SUPPLIES • • • • • • • • Single, Dual and Triple Output 15-20 W External AC/DC Power Supplies 1 4.21 x 2.24 x 0.98 inch enclosure 15-20 W external power supply Molded UL94V-0 plastic enclosure Stand alone ‘listed’ equipment Overvoltage and short circuit protection EN55022, EN55011, FCC conducted and radiated emissions level B UL, CSA and VDE safety approvals Available RoHS compliant The SSL20 series is a 15-20 W universal input ac-dc external Class II power supply in a 4.21 x 2.24 x 0.98 inch plastic enclosure. The SSL20 is a low cost series with five single output and two multiple output models in a very small package providing a preapproved external power solution for a host of worldwide low power portable and desktop applications. The SSL20 provides up to 20 W of output power with free air convection cooling. Standard features include universal input, overvoltage, short circuit protection and EN55022 conducted emissions level B. The series, with full international safety approval and the CE mark, provides pre-approved SELV outputs without the need for further safety approval or mechanical integration into the application system. The SSL20 series is designed for use in low power, portable and desktop data networking, computer and industrial applications requiring low cost external power adapters in a small package. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Total regulation (Line and load) Overshoot/undershoot Transient response Main output Auxiliary outputs At turn on Main output 50% to 100% full load step ±2.0% ±5.0% 2.0% ±5.0% max. dev., 1ms recovery to 1.0% ±0.02%/°C, max. Main output See table Continuous with auto-restart See table GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Switching frequency Approvals and standards Case Material Flammability rating Weight MTBF MIL-HDBK-217F 110 Vac @ full load 110 Vac @ full load Input/output Fixed 8 ms 70% typ. 3000 Vac 60 kHz, ±10 kHz EN60950, IEC950, UL1950 BABT, CSA C22.2 No. 950 General Electric Lexan, black UL94V-0 120 g (4.5 oz) 150,000 hours min. Temperature coefficient Overvoltage protection Short circuit protection Minimum output current INPUT SPECIFICATIONS Input voltage range Input frequency range Input current 90 Vac 230 Vac Universal input ENVIRONMENTAL SPECIFICATIONS 90-264 Vdc 47-440 Hz 0.6 Arms max. 0.3 Arms max. Relative humidity Level B Level B Altitude Vibration (See Note 6) Thermal performance Operating, full load 0 °C to +40 °C Non-operating –40 °C to +85 °C 0°C to +40°C ambient, Full load convection cooled Peak (See Note 1) Non-condensing Operating Non-operating 5-500Hz per MIL-STD-810E 5% to 95% RH 10,000 feet max. 30,000 feet max. 2.4 G rms 516.4 Part IV EMC CHARACTERISTICS Radiated emissions Conducted emissions EN55022/11, FCC part 15 EN55022/11, FCC part 15 International Safety Standard Approvals geprüfte Sicherhelt Shock VDE0805/EN60950/IEC950 File No. 104722 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062 Certification pending File Name: ssl20.pdf Rev (01): 07 Nov 2005 SSL20 Series EXTERNAL AC/DC POWER SUPPLIES OUTPUT VOLTAGE +5 V (VA) +12 V (VA) +15 V (VA) +24 V (VA) +48 V (VA) +5 V (VA) +12 V (VB) +5 V (VA) +12 V (VB) -5 V (VC) Notes 1 Single, Dual and Triple Output 15-20 W External AC/DC Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENTS RIPPLE MIN 0A 0A 0A 0A 0A 0.2 A 0.1 A 0.2 A 0.1 A 0A MAX (7) (2) OVP PEAK (1) TOTAL (5) MODEL (3) THRESHOLD 50 mV 120 mV 150 mV 150 mV 150 mV 50 mV 120 mV 50 mV 120 mV 50 mV 5.6-6.9 V 14-16.7 V 17.5-21 V 29-34.2 V 55-64 V 5.6-6.9 V -5.6-6.9 V --- REGULATION ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±5.0% ±2.0% ±5.0% ±5.0% NUMBER (7,8,9) 4.0 A 1.67 A 1.33 A 0.83 A 0.42 A 1.2 A 0.8 A 1.0 A 0.8 A 0.1 A 4.5 A 1.9 A 1.5 A 1.0 A 0.5 A 1.5 A 1.2 A 1.5 A 1.2 A 1.0 A SSL20-7605J SSL20-7612J SSL20-7615J SSL20-7624J SSL20-7617J SSL20-7629J SSL20-7607J MULTIPLE OUTPUT PIN CONNECTIONS MINI DIN PLUG OUTPUT PIN NO. DUAL OUTPUT TRIPLE OUTPUT MATING CONNECTOR 2 3 4 5 6 7 8 9 Peak output current lasting less than 60 seconds with duty cycle less than 5.0%. During peak loading, output voltage may exceed total regulation limits. 20 MHz bandwidth, peak to peak, measured using a 12 inch twisted pair, terminated with 47 µF electrolytic capacitor. Total regulation is defined as the static output regulation at 25 °C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. To help maintain the power supply safety approvals, the IEC320/C7 input connector cable must be rated minimum 3.0 A and approved by an applicable safety agency for the intended country of use. National and international variations on mains plugs, adapters and customer preference to lead length prevents Artesyn from supplying an IEC320/C7 (or compatible) input connector cable. The IEC320/C7 input (or compatible) connector cable can be sourced locally, e.g. Newark, Qual Electronics, Radio Shack, etc. or other non affiliated distributors. Main output voltage protected by Zener diode. Three orthogonal axes random vibration, 10 minute test for each axis. Maximum output power of 20 Watts for single output models and 15 Watts for multiple output models. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 1 2 3 4 5 6 7 8 SINGLE Inner Outer VA VA VA VA AMP Shielded VA VA Miniature circular VB VB DIN Plug 8 Pin P/N Return VC 749179-1 or equiv. Return Return Return Return Return Return OUTPUT PIN CONNECTIONS 2.5 MM JACK PLUG VA Return SWITCHCRAFT Power Jack, P/N 712A or equiv. 4.21 (107.00) 2.09 (53.00) 0.55 (14.00) 0.47 (12.00) 0.98 (25.00) 0.97 (24.60) 72.83 ± 0.79 (1850 ± 20) 2.24 (57.00) 8 PIN MINI DIN PHONE JACK 7 6 8 0.098 (2.500) 3 1 4 5 2 ALL DIMENSIONS IN INCHES (mm) Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: ssl20.pdf Rev (01): 07 Nov 2005