3451

Luminous scales 3451 (Single range) 2003 3452 (3 ranges) MΩ HiTESTER Field measuring instruments Compact analog MΩ meter Actual-size http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available on our website. Easily held in one hand Energy-saving design I 3451 specifications Model Insulation test voltage Effective max. indication Tolerance *1 Voltage with no load Min. resistance measurement value *2 Short-circuit current Center indication value Response times AC voltage scale Tolerance Transient voltage protection, 10 seconds Max. rated power Measurement ranges (23˚C±5˚C, 90 %rh. or less, no condensation) 3451 -11 125V DC 20MΩ 3451 -12 250V DC 50MΩ 3451 -13 3451 -14 500V DC 500V DC 100MΩ 1000MΩ ±5% of indicated value Not more than 1.2 times rated voltage 0.5MΩ 1MΩ 3451 -15 1000V DC 2000MΩ 0.125MΩ 0.5MΩ 0 to 250V 300V AC 0.25MΩ 2MΩ 1.2mA max. 0.6mA max. 1MΩ 2MΩ 20MΩ 50MΩ ∞ to center, ∞ to 0 MΩ within 3 seconds 0 to 300V 0 to 500V ±5% of maximum scale value 360V AC 600V AC 3VA (for battery check) 1200V AC *1 This is the tolerance for the first effective range. For the second effective range the value is ±10% of the indication. For 0 and infinity the tolerance is 0.7% of the scale length *2 Resistance value to maintain rated voltage. I 3452 specifications Model Insulation test voltage Effective max. indication Tolerance *1 Voltage with no load Min. resistance measurement value *2 Short-circuit current Center indication value Response times AC voltage scale Tolerance Transient voltage protection, 10 seconds Max. rated power Measurement ranges (23˚C±5˚C, 90 %rh. or less, no condensation) 25V DC 10MΩ 3452 -11 3452-12 3452 -13 50V DC 100V DC 125V DC 250V DC 500V DC 250V DC 500V DC 1000V DC 10MΩ 20MΩ 20MΩ 50MΩ 100MΩ 50MΩ 100MΩ 2000MΩ ±5% of indicated value Not more than 1.2 times rated voltage 0.05MΩ 0.2MΩ 0 to 150V 200V AC 0.1MΩ 0.5MΩ 0.125MΩ 0.5MΩ 0.25MΩ 1MΩ 0.5MΩ 2MΩ 0.25MΩ 1MΩ 0.5MΩ 2MΩ 2MΩ 0.6mA MAX. 50MΩ 0.025MΩ 0.2MΩ 1.2mA max. ∞ to center, ∞ to 0 MΩ within 3 seconds 0 to 500V ±5% of maximum scale value 600V AC 3VA (for battery check) 1200V AC *1 This is the tolerance for the first effective range. For the second effective range the value is ±10% of the indication. For 0 and infinity the tolerance is 0.7% of the scale length *2 Resistance value to maintain rated voltage. I 3451, 3452 common specifications Battery check function: Battery voltage OK if needle in "BATT CH" range Discharge function: Discharges capacitance charge of tested item Safety Standards: EN 61010 EMC Standards: EN 61326 Operating temperature range: 0 to 40 ˚C, 90 %rh. or less (no condensation) Storage temperature range: -20 to 50 ˚C, 90 %rh or less (no condensation) Insulation resistance: 100 MΩ minimum at 1000 V DC; electrical circuits and outer case Withstand voltage: 7.4 kV AC(50/60Hz, 1 minute); electrical circuits and outer case Power supply: R6P/AA manganese batteries ✕4 Dimensions and mass: 152 W✕95 H✕47 Dmm · approx. 420 g Accessories: 9384 CARRYING CASE ✕1 9292 TEST PROBE ✕1 Accessories Lead length approx. 1.2 m 9292 TEST PROBE 9384 CARRYING CASE Options 90 mm Lead length approx. 1.2 m 9293 PIN-TYPE EARTH PROBE DISTRIBUTED BY * 9288 BREAKER PIN *No CE marking HEAD OFFICE : 81 Koizumi, Ueda, Nagano, 386-1192, Japan TEL +81-268-28-0562 / FAX +81-268-28-0568 E-mail: os-com@ hioki.co.jp HIOKI USA CORPORATION : 6 Corporate Drive, Cranbury, NJ 08512 USA TEL +1-609-409-9109 / FAX +1-609-409-9108 E-mail: hioki@ hiokiusa.com All information correct as of Jul. 20, 2003. All specifications are subject to change without notice. ASM GmbH Am Bleichbach 18 - 22 85452 Moosinning Tel.: 08123-986-0 Fax: 08123-986-500 3451E4-37E-05U Printed in Japan