3490

ANALOG MW HiTESTER 3490 Field measuring instruments 3-range INSULATION & CONTINUITY Bright LED 3Ω range, 200mA OPTION TEST LEAD WITH REMOTE CONTROL SWITCH 9788 Insulation Testing in 3 Easy Steps Flip the Cover, Select Range & Test 2 Check for Live Circuits Check the Battery Status BATT : Hi BATT : Lo BATT : Dead Luminous Scale General Specifications Power source Continuous operating time Auto Power Save Operating Temperature & Humidity The LIVE CIRCUIT LED will light up in red whenever the voltage exceeds 20V AC between the LINE and EARTH terminals, and when at least 20V DC is still remaining during the auto discharge. Be well-informed about the condition of your batteries. Green signals that the battery level is sufficiently high, and red warns of low battery power. Replace the batteries before the LED turns completely off. Rated power voltage: 1.5 VDC × 4, LR6 alkaline battery × 4 Approx. 20 hours (at 500V range, no load) Approx. 15 minutes 0 to 40°C (32 to 104°F), 90%RH or lower (non-condensating) 40 to 50°C (104 to 122°F), at 50°C and below relative with linear decrease up to 50%RH 0 to 50°C (32 to 122°F), 90%RH or lower (non condensating) Storage Temperature & Humidity 600 VAC, Measurement Category Ш, Anticipated Transient Overvoltage: 6000V Maximum rated voltage to earth 5312 VAC, 50/60Hz, Measurement terminals - electrical enclosure, current sensitivity 1 mA Dielectric strength Safety EN61010 EMC EN61326 Standards On concrete: 1m/1 time Drop Proof Dimensions (excluding protrusions) Approx. 159W × 162H × 48D mm (6.26"W × 6.38"H × 1.89"D) Approx. 550g (19.4 oz.) (including battery, not including test lead) Mass 9787 Test Lead, Instruction manual, Shoulder strap, LR6 alkaline battery × 4 Accessories o 3490 specifications Guaranteed for one year at 23˚C±5˚C (73˚F±9˚F) and 90% RH 250 V DC Rated output voltage Effective maximum indicated value Center scale value Insulation Resistance Measurement 1st effective measuring range 2nd effective measuring range Open circuit voltage Lower limit measurement resistance value to be maintained reted output voltage Rated current Overload protection Ranges Center scale value Accuracy Open-circuit voltage Measuring current Overload protection Measuring range Accuracy Input resistance Overload protection 500 V DC 1000 V DC 100 MW 4000 MW 1 MW 50 MW 0.05 to 50 MW 2 to 1000 MW ±5% of indicated value 0.01 to 0.05 MW 0.5 to 2 MW 50 to 100 MW 1000 to 4000 MW ±10% of indicated value 1 to 1.2 times of rated output voltage 0.5 MW 1 MW 0.25 MW Resistance Measurement AC voltage Measurement Accessories TEST LEAD 9787 (1.2m) 1mA (Tolerance: 1 to 1.2 times of the rating value) 1200V AC (10 sec.) 3W 30W 1.5W 15W ±0.09W ±0.9W 4.1 to 6.9 V 200mA DC or more 20mA DC or more 720V AC (10 sec., by Fuse) 0 to 600 V (50/60 Hz) ±5% of maximum scale value 100 kW or more (50/60Hz) 1200V AC (10 sec.) TEST PROBE 9294 (1.2m) CONNECTION CORD 9257 (1.3m) BREAKER PIN 9288 (for Model 9294) 90mm(3.54") Options TEST LEAD WITH REMOTE CONTROL SWITCH 9788 (1.2m) HIOKI (Shanghai) Sales & Trading Co., Ltd. : 1904 Shanghai Times Square Office, 93 Huai Hai Zhong Road Shanghai, P.R.China POSTCODE: 200021 TEL +86-21-6391-0090/0092 FAX +86-21-6391-0360 E-mail: info-sh@hioki.cn DISTRIBUTED BY HEAD OFFICE : 81 Koizumi, Ueda, Nagano, 386-1192, Japan TEL +81-268-28-0562 / FAX +81-268-28-0568 E-mail: os-com@hioki.co.jp HIOKI USA CORPORATION : 6 Corporate Drive, Cranbury, NJ 08512 USA TEL +1-609-409-9109 / FAX +1-609-409-9108 E-mail: hioki@hiokiusa.com Beijing Office : A-2602 Freetown, 58 Dong San Huan Nan Road Beijing, P.R.China POSTCODE: 100022 TEL +86-10-5867-4080/4081 FAX +86-10-5867-4090 E-mail: info-bj@hioki.cn Guangzhou Office : Room 303, Profit Plaza, No.76, West Huangpu Road Guangzhou, P.R.China POSTCODE: 510623 TEL +86-20-38392673/2676 FAX +86-20-38392679 E-mail: info-gz@hioki.cn 3490E1-86E Printed in Japan All information correct as of June 27, 2008. All specifications are subject to change without notice.