WS1.1-2500-420A-L05

WS2.1 Position Sensor with Analog or A/D converted synchronous serial output Compact Sensor for Medium Ranges • Protection Class IP50 • Measurement Range: 0 ... 1500 mm to 0 ... 2500 mm 0 ... 59.06 in to 0 ... 98.43 in • With Analog Output or A/D Converter with synchronous serial output p evelo her d 7KT r furt 1 use fo ced by WS n`t Do Repla Outputs n Disco t mo inued del ment s Specifications Potentiometer: 1 k Ω Voltage: 0...10 V Current: 4...20 mA, 2 or 3 wire A/D Converter synchronous serial 12 Bit RS-485 Resolution Material Sensing Device Connector Linearity Protection class (IEC 529) Weight Environmental Immunity to Interference Temperature Humidity Shock Vibration Essentially inifinite / ADSI: 12 Bit Full Scale Aluminium and Stainless Steel Cable: Stainless Steel Precision Potentiometer Male Socket 8 pin DIN 45326 Up to ±0,05 % Full Scale IP50 1.8 kg approx. Refer to Output Specification Refer to Output Specification 90 % R.H. max. non condensing 50 g’s max. for 6 ms Duration 10 g’s max. (1 Hz - 2000 Hz) Order Code WS2.1 Analog WS2.1 Model Name Measurement Range (in mm) 1500 / 2000 / 2500 Outputs R1K = Potentiometer 1 kΩ (other Values on Request, i.e. 500Ω ) 10V = with 0 ... 10 V Signal Conditioner 420A = with 4 ... 20 mA Signal Conditioner (2 wire) 420T = with 4 ... 20 mA Signal Conditioner (3 wire) ADSI = with A/D Converter synchronous serial output 12 Bit / RS-485 Linearity L10 = ±0.10 % L05 = ±0.05 % Options (see catalog) Order Code Mating Connector Order Example: WS2.1 - 2500 - 10V - L10 1 KAT-WS-E-96 WS-CONN-D8 ASM GmbH WS2.1 Position Sensor with Analog or A/D converted synchronous serial output Cable Forces typical at 20 °C Range [mm in] 1500 2000 2500 59.06 78.74 98.43 Maximum Pull-out Force [ N] 10.2 8.4 7.2 Minimum Pull-in Force [ N] 6.7 5.4 4.8 Mounting aid ∅ 18 [dia. 0.71] removable Dimensions in brackets are inches. For guaranteed dimensions consult factory Range A 24.5 16.5 8.5 0.96 0.65 0.33 Dimensions (mm) 1500 2000 2500 59.06 78.74 98.43 Dimensions (in) ASM GmbH KAT-WS-D-96 2 WS2.1 Position Sensor with Incremental Encoder Compact Sensor for Medium Ranges • Protection Class IP50 • Measurement range: 0 ... 2500 mm 0 ... 98.43 in • Incremental Encoder Output elopm r dev T K furthe e for d by WS17 t us lace Don` Rep Outputs n Disco mo nued ti del ents Specifications Incremental Encoder Output with differential Push-pull Circuit for reliable Data Transmission. The output is compatible with LD, TTL and CMOS. 5 or 10 pulses per mm; 127 or 254 pulses per in. 200 mm; 7.87 in Aluminium and Stainless Steel. Cable: Stainless Steel Incremental encoder Male Socket 8 pin DIN 45326 ±0,05 % Full Scale IP50 1.8 kg approx. Refer to Output Specification Refer to Output Specification 85 % R.H. max. non condensing 30 g’s for 11 ms Duration 10 g’s max. (50 Hz / 1 h) Resolution Distance between Reference Pulses Material Sensing Device Connector Linearity Protection Class (IEC 529) Weight Environmental Immunity to Interference (EMC) Temperature Humidity Shock Vibration Order Code WS2.1 Incremental WS2.1 Model Name Measurement Range (in mm) 2500 (smaller measurement ranges included) Pulses per mm 5 = 5 Pulses per mm; 127 pulses per in 10 = 10 Pulses per mm; 254 pulses per in Output PP530 Order Code Mating Connector Order Example: WS2.1 - 2500 - 5 - PP530 3 KAT-WS-E-96 WS-CONN-D8 ASM GmbH WS2.1 Position Sensor with Incremental Encoder Maximum Pull-out Force [ N] 8.6 Minimum Pull-in Force [ N] 5.7 Cable Forces typical at 20 °C Range [mm in] 2500 98.43 Mounting aid ∅18 [dia. 0.71] removable Dimensions in brackets are inches. For guaranteed dimensions consult factory ASM GmbH KAT-WS-D-96 4