AA01D-005L-150S

W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 60 Astec Conventional Power 1-2 Watts AA01D Total Power: Input Voltages: No. of Outputs: 1-2 Watts 5V, 12V, or 24V Single, Dual Electrical Specs Input Input range Input reverse voltage protection Input filter Efficiency 4.5 - 5.5 Vdc; 10.8 - 13.2 Vdc; 21.6 - 26.4 Vdc Fuse recommended Capacitor 50-70% typ Output Voltage tolerance Line regulation Load regulation Noise/ripple Short circuit protection Transient response Switching frequency Temperature coefficient Output 1 and 2 - ±3.0% Output 1 and 2 - ± 1.0% 5V Output Models ±1.0% 1% mV P-P (see note1) 10 Second Duration 250 usec max (50% load change to within 1% VO Nom) 25kHz typ ± 0.02%/° C Special Features • • • • 1 Year warranty 1.25" x 0.34" x 0.57" Case size 500Vdc Isolation -25°C to +71°C operating temperature Isolation I/O isolation Isolation resistance 500Vdc 1 x 109 ohms Environmental Operating ambient temperature: -25°C to +71°C (full load, no derating) Storage temperature: -55°C to +105°C Humidity: 5% to 95% (non-condensing) Cooling method: Convection MTBF: >1,000,000 hours (MIL-HDBK-217F) 60 America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 61 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 AA01D Ordering Information Input Voltage 4.5-5.5Vdc 4.5-5.5Vdc 4.5-5.5Vdc 4.5-5.5Vdc 4.5-5.5Vdc 4.5-5.5Vdc 10.8-13.2Vdc 10.8-13.2Vdc 10.8-13.2Vdc 10.8-13.2Vdc 10.8-13.2Vdc 10.8-13.2Vdc 21.6-26.4Vdc 21.6-26.4Vdc 21.6-26.4Vdc 21.6-26.4Vdc 21.6-26.4Vdc 21.6-26.4Vdc Output 1 Voltage 5V @ 0.200A 9V @ 0.200A 12V @ 0.125A 15V @ 0.100A +12V @ 0.060A +15V @ 0.050A 5V @ 0.200A 9V @ 0.200A 12V @ 0.125A 15V @ 0.100A +12V @ 0.060A +15V @ 0.050A 5V @ 0.200A 9V @ 0.200A 12V @ 0.125A 15V @ 0.100A +12V @ 0.060A +15V @ 0.050A Output 2 Voltage Maximum Power 1W 1.8W 1.5W 1.5W 1.44W 1.5W 1W 1.8W 1.5W 1.5W 1.44W 1.5W 1W 1.8W 1.5W 1.5W 1.44W 1.5W Model Number AA01D-005L-050S AA01D-005L-090S AA01D-005L-120S AA01D-005L-150S AA01D-005L-120D AA01D-005L-150D AA01D-012L-050S AA01D-012L-090S AA01D-012L-120S AA01D-012L-150S AA01D-012L-120D AA01D-012L-150D AA01D-024L-050S AA01D-024L-090S AA01D-024L-120S AA01D-024L-150S AA01D-024L-120D AA01D-024L-150D -12V @ 0.060A -15V @ 0.050A -12V @ 0.060A -15V @ 0.050A -12V @ 0.060A -15V @ 0.050A Pin Assignments Single Output 1. 2. 3. 9. 10. 11. 12. Dual Output 1. 2. 3. 9. 10. 11. 12. +Vin -Vout Com N\C Com +Vout -Vin 0.07 [1.9] .020 [0.5] 0.10 typ. [2.54] 1.10 [27.94] 0.34 [8.6] 0.08 [2.0] +Vin N/C N/C N/C -Vout +Vout -Vin 1.25 [31.8] Pin #'s are for reference only 0.57 [14.5] 12 3 9 10 11 12 0.4 [10.2] .010 [0.25] Astec Conventional Power Notes: 1. 20 MHz bandwidth. An external 0.1uf ceramic capacitor is recommended to be placed from +V out to -V out. 2. All specifications are typical at nominal line, full load, and 25 ° C unless otherwise noted. 3. All specifications subject to change without notice. Mechanical drawings are for reference only. 4. Warranty: 1 yr Case Material: Plastic Weight: 0.3Oz/8Grams www.astec.com 61