AED17Q50-6

Embedded Power for Business-Critical Continuity AED/ALD17 150 Watts Total Power: 150 Watts Input Voltage: 48V # of Outputs: Single Rev. 04.20.06 AED/ALD17 1 of 2 RoHS Electrical Specifications Input Input range Efficiency Over Voltage Protection 36V to 55V 96%@ 9.6V (typical) 60V typical 17A max -25% / +15% Vo, nom 5% Vo (typical) 90mV (typical) Auto-restart 165kHz TTL compatible (positive or negative enable logic) 2000Vdc max Output Special Features • Intermediate Bus Converter for Front End (DPA) Distributed Power Architecture application • High efficiency (96% Typical) • Industry standard package 16th Brick 0.90” x 1.30" • High capacitive load limit on start-up • Output Enable Pin • Undervoltage lockout • Over Temperature Protection • Meets Basic Insulation • EU directive 2002/95/EC compliant for RoHS Output current Line regulation Load regulation Noise/ripple1 Over current limit Switching frequency Over temperature protection 115°C average PCB temperature (autorecovery) Control Enable Isolation Voltage Input to Output Environmental Specifications Operating ambient temperature range Storage temperature MTBF -40°C to +85°C ambient -55°C to +125°C >1 million hours Safety UL, cUL 60950-1 TUV EN60950-1 Embedded Power for Business-Critical Continuity Ordering Information Input Voltage 36 - 55V Options: (X) : Output Voltage 9.6V = = = = = = Output Current 17A Efficiency2 96% Typ Model Number A(X)D17Q50(N)-(6)(L) Astec Power 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Rev. 04.20.06 AED/ALD17 2 of 2 “L” “E” (N) : "N" (6) : “-6” (L) : “L” without “L” Open Frame / Low Profile Heatplate Construction designates Negative Logic Enable (default is Positive Enable with no suffix “N” required) 3.7mm nominal pin length (default is 5mm nominal pin length with no suffix “-6” required) RoHS Compliant (RoHS 6) RoHS Compliant with Lead (Pb) in solder exemption (RoHS 5) Pin Assignments Single Output 1. +Vin 2. Enable 3. -Vin 4. -Vout 5. Blank 6. Blank 7. Blank 8. +Vout Notes: 1. Measured at 20 MHz bandwidth with external 10 µF tant. capacitor in parallel with 1 µF ceramic capacitor placed across +Vout and Vout; 33 µF e-cap or equivalent placed across +Vin and -Vin. 2. Efficiency measurements are typical values taken at 48V input, nominal output, full load and TA = 25°C. 3. All specifications are typical at nominal line, full load and TA = 25°C unless otherwise noted. 4. All specifications subject to change without notice. 5. Mechanical drawings are for reference only. Dimensions are in inches [millimeters]. Pin placement tolerance ± 0.005 [0.127]. Mechanical Tolerance ± 0.02 [0.5]. Pin diameter, ∅ = 0.06” for Pin 4 (-Vout) and Pin 8 (+Vout), the rest of the pins are ∅ = 0.04”. 6. Technical Reference Notes should be consulted for detailed information when available. 7. Warranty 1yr. Mechanical Drawing ALD Series 1.30 [33.0] PIN 1 0.90 [22.9] PIN 1 PIN 8 PIN SIDE DOWN 0.35 [8.9] 0.189[4.8] min 0.204[5.2] max Units 2111-2116, Level 21 Tower 1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426 For global contact, visit: 0.04Ø [1.0Ø](3X) SIDE VIEW 0.062 Ø[1.57Ø] (2x) www.astecpower.com technicalsupport@astec.com While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in US A 0.10 [2.5] 0.15 [3.8] 1.10 [27.9] 0.30 [7.6] 0.60 [15.2] 0.60 [15.2] PIN SIDE UP AED Series 1.39 [35.3] 1.30 [33.0] PIN 8 Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services 0.30 [7.6] 0.05 [1.2] PIN 1 0.90 [22.9] PIN SIDE DOWN 0.20 [5.2]Max. 0.18 [4.8]Min. 0.42 [10.6] 0.54 [13.6] 0.040 Ø[1.0 Ø](3X) SIDE VIEW 1.10 [27.9] 0.062 Ø[1.57 Ø](2X) 0.10 [2.5] EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co. * This is a Preliminary Data Sheet. Astec Power reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use or application. 0.15 [3.8] 0.30 [7.6] 0.60 [15.2] CL 0.60 [15.2] PIN SIDE UP