AEE04F24-197

15 Watts AEE04 AEE01-Dual Total Power: Input Voltages: No. of Outputs: 15 Watts 48V, 24V Single, Dual Electrical Specs Input Input range 18 to 36 VDC 36 to 72 VDC 86% typical (3.3V) Efficiency Output Voltage tolerance 2.45 - 2.55V (2.5V) 3.24 - 3.36V (3.3V) 4.95 - 5.05V (5.0V) 11.88 - 12.12V (12.0V) Dual +12 (1%), -12V(5%) ±1% max Dual +12V(±1% max) -12V(±10% max) Special Features • • • • • • • 15 W, Single output High Efficiency 2:1 Input range 1.0" x 2.0" x 0.4 case Industry standard package Low Profile Low Cost Overall regulation Noise/ripple Transient response 2.5% (mV P-P) Max 2%Vo, 100 usec typical (25% step load change) ±0.04 %Vo/°C 290kHz Temperature Regulation Switching frequency Environmental Operating base temperature range: -40°C to +105°C Storage temperature: -55°C to +125°C MTBF: 1.5 Million Hours (Belcore TR332) Isolation I/O isolation Input to Case Output to Case 1500 VDC 1500 VDC 1500 VDC Safety UL CSA UL1950 Recognition CSA22.2-950 Recognition TUV EN60950 Certified CE CE Mark 26 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 AEE04 / AEE01-Dual Ordering Information Input Voltage 18-36 V 36-72 V 36-72 V 36-72 V 36-72 V 36-72 V Output Voltage 3.3 @ 4.0 A 2.5 @ 4.0 A 3.3 @ 4.0 A 5.0 @ 3.0 A 12.0 @ 1.25 A ±12V @ ±.63A Efficiency 85% 83% 86% 87% 87% 87 Model Number AEE04F24-197 AEE04G48-197 AEE04F48-7 AEE03A48-7 AEE01B48-7 AEE01BB48-7 -97, -1, -197 -97, -1, -197 -97, -1, -197 Options Availible Options -97 = Trim and 6.1mm Pin -1 = Negative logic enable -197 = Trim, negative enable, 6.1mm Pin Positive logic is std. Note: -7 = 6.1mm Pin (standard) Consult factory for pin length options Notes: 1. Refer to Technical Reference Note (App Note) for recommended input/output filtering 2. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 3. All specifications subject to change without notice. 4. Mechanical drawings are for reference only. www.astec.com 27