APA100

W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 58 Astec Integrated Power 1200 Watts APA100 (PFC) Total Power: Input Voltages: No. of Outputs: 1200 Watts 85-265 VAC Single Electrical Specs Input Input Voltage Input Frequency Efficiency 85 to 265 Vac 50/60 Hz 92% typical (VI = 115 Vac); 94% typical (VI = 230 Vac) Total Harmonic Distortion Less than10% Power Factor 0.99 typical (IO = 2A); 0.97 typical (IO = 1A) Control Power Fail Warning Power Fail Warning Adjust LD Enable PFC Enable Voltage Adjust Clock Input (external sync) Clock Output (int. clock) Temperature Monitor Output Current Monitor Output Direct drive output to opto-isolator 205 to 355 Vdc adjustable Direct drive output to opto-isolator TTL compatible (low to enable) 240V to 393V 3.3 to 5.5Vp-p @ 1MHz ± 5% 4.5Vp-p typical @ 1MHz ± 0.5% 10 mV/°K (2.73V = 0°C) 0 to 1.28mA (1 mA = 2.5A) Special Features • Unity power factor • High efficiency - up to 96% • Universal input voltage and frequency range • Up to 1200W output power • Parallelable with current sharing within 3% • < 10% harmonic distortion conforming to IEC555-2 • 85°C baseplate operating temperature (no derating) • High reliability - over 1 million hours MTBF • Power fail warning signal • PLD feature • Enable output to control AMPSS® DC-DC converters • 125Khz fixed Switching frequency Output Output Voltage Current Share Accuracy Overvoltage Protection Power Limit 383 V typical (IO = 2A); 393 V typical (IO = 0A) 3% typical 417 V typical VIN=85Vac; Pmax=750W VIN=180Vac; Pmax= 918W VIN=230Vac; Pmax= 1200W Environmental Operating temperature (baseplate): -20°C to +85°C (no derating) Storage temperature: -40°C to +105°C Overtemperature protection: 90°C typical MTBF: > 1 million hours (50°C baseplate) UL CSA EN VDE CE Safety UL 1950 CSA22.2-234 CSA22.2-950 60950 IEC950 CE Mark (LVD) E132002 LR53 982C 20396-3336-1012 58 America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 59 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 APA100 (PFC) Ordering Information Part Number APA100-101 APA100-103 APA100-102 APA100-104 Description 1200W Low Profile PFC Module 950W Low Profile PFC Module 1200W Low Power PFC Module 1200W Low Profile PFC Module Notes For parallel operation the total input current must be 16A rms-requires external rail rectifiers THERMAL BASE PLATE* 12.7 (0.50) 4 OUTPUT PINS 4 INPUT PINS Pin Assignments Input 31-32. 33-34. L1 L2 14 CONTROL PINS Output 21-22. +ve 28-29. –ve Control Pins 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. RSV (Reserved) TEMP MON C MON C SHARE CLK OUT CLK IN RSV (Reserved) RSV (Reserved) V ADJ PFW ADJ S GND PFW 34 33 AMPSSTM POWER MODULE 29 8 7 14 1 22 21 32 31 116.8 (4.60) C SHARE CLK OUT 7 1 + O/P 13. LD ENABLE 14. PF ENABLE Output to AMPSS™ Modules 8 14 – O/P C SHARE CLK IN 7 1 + O/P 8 14 – O/P L2 APA100-xxx + O/P + I/P AM80A-300L 6 7 + O/P 7 1 85 to 265 Vac 8 L1 385Vdc 14 – O/P + 1 + SENSE 61.0 (2.40) 28 Astec Integrated Power Load 12 – SENSE – I/P – O/P AM80A-300L + I/P + O/P + Power Fail Warning Adjust – I/P 6 7 1 + SENSE 12 – SENSE – O/P www.astec.com 59