APC12J03-9

40 Watts APC12 Preliminary Total Power: Input Voltages: No. of Outputs: 40 Watts 1.8 to 13 V Single (12 Amps) Electrical Specs Input Input range Input Surge Efficiency 1.8-6.0VDC and 5.6-13.0VDC 7V for 03 version 14V for 08 version 3V3 @ 92% (Typ) Control Enable TTL compatible (positive enable) Output Regulation (Line, Load, Temp) 1 million hours Safety UL, cUL 609500 Recognized TUV EN60950 Licensed REV C:JANUARY 03 2 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Voltage 1.8V-6.0V 1.8V-6.0V 1.8V-6.0V 1.8V-6.0V 1.8V-6.0V 1-8V-6.0V 1-8V-6.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V Note: Output Voltage 0.9V 1.2V 1.5V 1.8V 2.5V 3.3V 0.9V 0.9V 1.2V 1.5V 1.8V 2.5V 3.3V 0.9V @ @ @ @ @ @ @ @ @ @ @ @ @ @ 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A 12A Efficiency Full Load 76% (Typ)1 81% (Typ 86% (Typ) 87% (Typ) 90% (Typ) 92% (Typ) 76% (Typ) 73% (Typ) 77% (Typ) 81% (Typ) 82% (Typ) 87% (Typ) 90% (Typ) 74% (Typ) Model Number APC12J03 APC12K03 APC12M03 APC12Y03 APC12G03 APC12F03 APC12J03-93 APC12J08 APC12K08 APC12M08 APC12Y08 APC12G08 APC12F08 APC12J08-93 1. Typical Efficiency is measured at full load, mid range input, and Tc=25 Deg C 2. “-9MA” (suffix) - Output Trim, PGood and Parallel Options available on all modules 3. “-9” (suffix) - Output Trim option available on 0.9V version. Notes: 1. 20 MHz bandwidth. External 56 uF (ESR < 75mohm) for 03 device and 100uF (ESR < 40mohm) for 08 device across Vout and Gnd. 2. Meet FCC class A and ETS300-386-1 requirements for conducted noise. Consult Factory for filtering information to meet FCC class B, VDE or EIC specifications. 3. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 4. All specifications subject to change without notice. Mechanical drawings are for reference only 5. Technical Reference Notes should be consulted for detailed information 6. Warranty: 1yr Mechanical Dimensions Pad Layout Top View of Board Optional Pins: PGood - Power Good Logic Signal P - Active Current Share Pin Trim - Trim Pin (0.9 to 3.6V) REVC: JANUARY 03 www.astecpower.com 3