ASD10H-48D15

I s o l a t e d a n d R e gulated 10 WATT Open Frame DC/DC Converter Wide 4 : 1 Input Range High Efficiency Regulated Outputs Unit measures 1”W x 2”L x 0.375”H ASD10H series 1500V Isolation Integral Finned Heatsink EN60950 & UL6050-1 Approved Model Number SINGLE OUTPUT ASD10H-12S3 ASD10H-48S3 ASD10H-12S5 ASD10H-48S5 ASD10H-12S9 ASD10H-48S9 ASD10H-12S12 ASD10H-48S12 ASD10H-12S15 ASD10H-48S15 DUAL OUTPUT ASD10H-12D5 ASD10H-48D5 ASD10H-12D12 ASD10H-48D12 ASD10H-12D15 ASD10H-48D15 Output Voltage Output Amps Input Range 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 2.5 2.5 2 2 1.1 1.1 0.83 0.83 0.67 0.67 +/-1 +/-1 +/-0.42 +/-0.42 +/-0.33 +/-0.33 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC +/-5 VDC +/-12 VDC +/-15 VDC Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 10 WATT Open Frame DC/DC Converter INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage 12VDC 9-36 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. 48VDC 18-75 VDC ASD10H (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 82%, typ 450Khz series GENERAL SPECIFICATIONS On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency Switching Frequency OUTPUT SPECIFICATIONS Voltage and Current Preset Accuracy Cross Regulation (Duals) Load Regulation 20% - FL Line Regulation Temperature Coefficient Ripple/Noise (Pk-Pk, typ) Single 3.3V Single 5, 9,12, 15V Dual 5V Dual 12, 15V Overvoltage Protection Short Circuit Protection See Selection Chart Singles: +/- 1% max. Duals: +/- 2% max. 5-8% typ. singles: +/- 0.5% duals: +/-1%, +/-3% (5V mod) singles: +/- 0.5% duals: +/- 1% +/-0.03%/°C 100mV 50mV 150mV (12Vin) 100mV (48Vin) 50mV Clamp, 130-150% * Continuous, self-recovering ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Relative Humidity Storage Temperature Maximum Heatsink Temp Input Fusing MTBF Shock/Vibration Safety EN60950 UL60950-1 -25 to +71°C(FL) 0 to 95%, non-cond -40 to +125°C * 110°C * 12V: 4A, 48V: 2A 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C TUV File # B 02 10 22749 038 UL File # E167432 PHYSICAL SPECIFICATIONS Heatsink Material Construction Weight Aluminum Open Frame 0.57 oz, (16g) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 10 WATT Open Frame DC/DC Converter MECHANICAL DIMENSIONS .375 (9.52) ASD10H Dual Outputs + Input - Input + Output Common - Output Control series Pin # 1 2 3 4 5 6 Single Outputs + Input - Input + Output N/A - Output Control .040 (1.02) .150 (3.81) .070 (1.78) 3 1.00 (25.40) .600 (15.24) 2 4 6 .400 (10.16) .100 (2.54) 1.400 (35.56) 2.00 (50.80) 5 .500 (12.70) .100( 2.54) .600 (15.24) OUTPUT DERATING CURVE 120 100 Output Power (%) 80 60 40 20 0 0 10 20 30 40 50 Ambient Temp °C 60 70 80 90 .900 (22.86) 1 WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181