ASD15H-48S15

I s o l a t e d a n d R e gulated 15 WATT Open Frame DC/DC Converter Wide 4 : 1 Input Range High Efficiency Regulated Outputs 1500V Isolation ASD15H series Integral Finned Heatsink EN60950 & UL60950-1 Approved Unit measures 1.5”W x 2”L x 0.4”H Model Number SINGLE OUTPUT ASD15H-12S3 ASD15H-48S3 ASD15H-12S5 ASD15H-48S5 ASD15H-12S12 ASD15H-48S12 ASD15H-12S15 ASD15H-48S15 DUAL OUTPUT ASD15H-12D5 ASD15H-48D5 ASD15H-12D12 ASD15H-48D12 ASD15H-12D15 ASD15H-48D15 Output Voltage Output Amps Input Range 3.3 VDC 5 VDC 12 VDC 15 VDC 3.75 3.75 3 3 1.25 1.25 1 1 +/-1.5 +/-1.5 +/-0.62 +/-0.62 +/-0.5 +/-0.5 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC 9-18VDC 20-75VDC +/-5 VDC +/-12 VDC +/-15 VDC Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 15 WATT Open Frame DC/DC Converter INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage 12VDC 9-18 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. 48VDC 18-75 VDC ASD15H (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 82%, typ 450Khz UL60950-1, EN60950 series GENERAL SPECIFICATIONS On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency Switching Frequency Safety OUTPUT SPECIFICATIONS Voltage and Current Load Regulation 20% - FL Line Regulation Trim Range Temperature Coefficient Ripple/Noise(Single/Dual) Overvoltage Protection Voltage Stability Transient Response Short Circuit Protection See Selection Chart singles: +/- 0.5% duals: +/-1%, +/-3% (5V mod) singles: +/- 0.5% duals: +/- 1% 0.5V min, 0.65V typ +/-0.01%/°C 100mV Pk-Pk, typ Clamp, 130-150% * +/- 0.05%, max +/- 2%, max Continuous, self-recovering ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Maximum Case Temp Input Fusing MTBF Shock/Vibration -25 to +75°C(FL) -40 to +125°C * 110°C * 12V: 4A, 48V: 2A 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C PHYSICAL SPECIFICATIONS Heatsink Material Construction Weight Aluminum Open Frame .93 oz, (26g) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 15 WATT Open Frame DC/DC Converter MECHANICAL DIMENSIONS .40 (10.16) ASD15H Single Outputs + Input - Input No Pin Control No Pin + Output Out. Ret. Trim series Pin # 1 2 3 4 5 6 7 8 Dual Outputs + Input - Input No Pin Control + Output Out. Ret. - Output Trim .070 (1.78) DIA. .040 (1.02) DIA. .10 (2.54) T YP. .600 (15.24) 5 .400 (10.16) T1 1.50 (38.1) 1 .950 (24.13) 2 7 4 L2 8 .550 (13.97) .250 (6.35) BOTTOM VIEW 1.800 (45.72) 2.00 (50.8) .150 (3.81) .100 (2.54) TRIM CONNECTIONS +v 10Kohm Pot. -v To Pin 8 OUTPUT DERATING CURVE 16 14 12 Output Power, Watts 10 8 6 4 2 0 -25 -20 -10 0 10 20 30 40 50 60 Ambient Temp, ° C 70 80 90 1.350 (34.29) 6 WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181