ASM-0101

1 0 W U l t r a m i n i a t ure Medical Grade Switching Power Supplies asm10 series Universal 85-265VAC Input High Efficiency Regulated Outputs 4000V Isolation Single Outputs UL60601-1, EN60601-1 & IEC60601-1 Single Output from 3.3 to 24 VDC 2”W x 2.28”L x 0.66”H model Number ASM-0100 ASM-0101 ASM-0102 ASM-0103 ASM-0105 Output Voltage 3.3 VDC 5 VDC 12 VDC 15VDC 24VDC Output amps (max) 2.5A 2A 0.85A 0.67A 0.42A (pk) 3.3A 2.6A 1.2A 0.9A 0.6A Order On-Line! WWW.asTRODYNE.COm astrodyne.com 300 myles standish Blvd., Taunton, ma 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 1 0 W U l t r a m i n i a t ure Medical Grade Switching Power Supplies INPUT sPECIFICaTIONs Input Voltage Range Frequency Range Inrush Current, typ: 85-265 VAC 47-63 Hz 20A @ 100VAC Input * 40A @ 200VAC Input * asm10 2” x 2.28” x 0.66” Open Frame 1.6oz (44g) 50-37-5033 (Input) 50-37-5023 (Output) series PHYsICaL sPECIFICaTIONs Size Construction Weight Connectors: Molex P/N: OUTPUT sPECIFICaTIONs ENVIRONmENTaL sPECIFICaTIONs Voltage and Current Load Regulation Line Regulation Cross Regulation (Duals) Preset Accuracy DC Voltage Adjust (typ) Temperature Coefficient Ripple/Noise Over Voltage Protection Over Temp. Protection Short Circuit Protection Hold Up Time See Selection Chart +/- 3% (20% to 100% Load) Singles +/- 0.1~1%, typ 2% 1% +/- 6% of FS (Primary) +/-0.03%/°C 100mV Pk-Pk, typ Clamp, 130-150% * Latching, Cool and Repower Continuous, self-recovering 20 mS, typ Oper. Temperature Storage Temperature Relative Humidity EMC MTBF 0 to +50°C(FL) -25 to +71°C * 0 to + 95%, non-cond * FCC/A, VDE 0871/A 180,000 Hrs Mil Std 217, 25°C OUTPUT DERaTING CURVE 100 90 80 70 Load (%) 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 Ambient Temperature DegC GENERaL sPECIFICaTIONs Isolation I/P-O/P: 4000VAC I/P-Ground: 2500VAC O/P-Ground: 1000VAC 75%~78%, typ 100Khz, (fixed, typical) UL60601-1, EN60601-1, IEC60601-1 Efficiency Switching Frequency Safety All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.asTRODYNE.COm 300 myles standish Blvd., Taunton, ma 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 1 0 W U l t r a m i n i a t ure Medical Grade Switching Power Supplies mECHaNICaL DImENsIONs 0.1 0.12” Dia. Mtg Holes (4 plcs) asm10 series 2.0 0.68 10 Watt 0.1 2.28 J1 (aC Input) Pin 1 Pin 3 AC Neutral AC Line NOTE: For Class II operation (no earth Gnd), insulating type hardware must be used at this mounting hole J2 (DC Output) Pin 1 Pin 3 +Vout Return WWW.asTRODYNE.COm 300 myles standish Blvd., Taunton, ma 02780 Ph: 1-800-823-8082 Fax: 508-823-8181