FDC05-24S12

I s o l a t e d a n d R e gulated 5 WATT Modular DC/DC Converters Wide 2 : 1 Input Range High Efficiency Regulated Outputs 1600V Isolation Full EMI Shielding Standard Pinouts Unit measures 1”W x 2”L x 0.375”H FDC05 series Model Number SINGLE OUTPUT FDC05-12S33 FDC05-24S33 FDC05-48S33 FDC05-12S05 FDC05-24S05 FDC05-48S05 FDC05-12S12 FDC05-24S12 FDC05-48S12 FDC05-12S15 FDC05-24S15 FDC05-48S15 DUAL OUTPUT FDC05-12D05 FDC05-24D05 FDC05-48D05 FDC05-12D12 FDC05-24D12 FDC05-48D12 FDC05-12D15 FDC05-24D15 FDC05-48D15 Output Voltage Output Amps Input Range 3.3 VDC 5 VDC 12 VDC 15 VDC 1 1 1 1 1 1 0.47 0.47 0.47 0.4 0.4 0.4 +/-0.5 +/-0.5 +/-0.5 +/-0.23 +/-0.23 +/-0.23 +/-0.19 +/-0.19 +/-0.19 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC +/-5 VDC +/-12 VDC +/-15 VDC Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 5 WATT Modular DC/DC Converters INPUT SPECIFICATIONS Input Voltage Ranges: 12 VDC Nominal 24 VDC Nominal 48 VDC Nominal Pi Type 9-18 VDC 18-36 VDC 36-72 VDC FDC05 1600VDC 10000 M Ohms 1000 pF 80%, typ 300Khz series GENERAL SPECIFICATIONS Input-Out Isolation Isolation Resistance In/Out Capacitance Efficiency Switching Frequency Input Filter OUTPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Voltage and Current Load Regulation 25% - FL Line Regulation Temperature Coefficient Ripple/Noise(Single/Dual) Voltage Stability Transient Response Recovery Single, 25% Load Step Change Dual, FL-50% +/-1% Error Short Circuit Protection Voltage Balance, Dual See Selection Chart singles: +/- 0.2% duals: +/-1% +/- 0.2% +/-0.02%/DegC 75mV Pk-Pk, typ +/- 2% microSeconds 200 200 Continuous, self-recovering +/-1% Oper. Temperature Storage Temperature Maximum Case Temp MTBF -25 to +71 DegC(FL) -55 to +125 DegC * 110 DegC * 3.1 MHrs MIL-HDBK-217F TA=25C FL PHYSICAL SPECIFICATIONS Case Material Construction Weight Nickel-Coated Copper Non-Conductive Base Fully Encapsulated 0.9 oz, (26g) All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 5 WATT Modular DC/DC Converters MECHANICAL DIMENSIONS 1.00(25.4) 0.50 (12.7) DIA. 0.04(1.0) FDC05 series OUTPUT DERATING CURVE FDC05-48S05 Derating Curve 0.40 (10.2) OUTPUT POWER (%) 0.40 (10.2) 0.40 (10.2) 100 75 50 25 Nature convection 50 60 70 80 90 100 0 -40 -25 -10 0 2.00(50.8) Bottom View 0.80(20.3) 3 4 12 5 AMBIENT TEMPERATURE (ºC) 0.10(2.5) 0.20(5.1) 0.60(15.2) 0.22(5.6) 1. All dimensions in Inches (mm) Tolerance x.xx±0.02(x.x±0.5) 2. Pin Pitch tolerance ±0.014(0.35) Pin # 1 2 3 4 5 Single Outputs Dual Outputs + Input - Input + Output No Pin - Output + Input - Input + Output Common - Output WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181