FDC60-24S05

I s o l a t e d a n d R e gulated 60 WATT Modular DC/DC Converters Wide 2 : 1 Input Range High Efficiency Regulated Outputs 1600V Isolation Full EMI Shielding PI Input Filter FDC60 series Unit measures 2.76”W x 3.94”L x 0.75”H Model Number SINGLE OUTPUT FDC60-12S33 FDC60-24S33 FDC60-48S33 FDC60-12S05 FDC60-24S05 FDC60-48S05 FDC60-12S12 FDC60-24S12 FDC60-48S12 FDC60-12S15 FDC60-24S15 FDC60-48S15 DUAL OUTPUT FDC60-12D3305 FDC60-24D3305 FDC60-48D3305 FDC60-12D05 FDC60-24D05 FDC60-48D05 FDC60-12D12 FDC60-24D12 Output Voltage Output Amps Input Range UL E193009; TUV R2054535; CB JPTUV-001393 3.3 VDC 5 VDC 12 VDC 15 VDC 15 15 15 12 12 12 5 5 5 4 4 4 6/6 6/6 6/6 +10 / -2 +10 / -2 +10 / -2 +/-2.5 +/-2.5 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 3.3 / 5 VDC +/-5 VDC +/-12 VDC Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 60 WATT Modular DC/DC Converters INPUT SPECIFICATIONS Input Voltage Ranges: 12 VDC Nominal 24 VDC Nominal 48 VDC Nominal Pi Type 9-18 VDC 18-36 VDC 36-72 VDC FDC60 (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 1600VDC 10000 M Ohms 83%, typ 200Khz, typ series GENERAL SPECIFICATIONS On/Off Control Input Filter OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation (10%-FL) singles/duals: +/-0.5% xxD3305 Models 3.3V output min load=800mA Line Regulation singles/duals: +/-0.5% Temperature Coefficient +/-0.02%/DegC Ripple/Noise 1% Pk-Pk of Vout, typ Voltage Stability +/- 2% Short Circuit Protection Continuous, self-recovering Overvoltage Protection Threshold: 3.3V Output 3.9Volts 5V Output 6.2Volts 12V Output 15Volts 15V Output 18Volts Input-Out Isolation Isolation Resistance Efficiency Switching Frequency ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Maximum Case Temp MTBF -25 to +71 DegC(see derate) -55 to +125 DegC * 100 DegC * 1.53 MHrs MIL-HDBK-217F TA=25C FL PHYSICAL SPECIFICATIONS Case Material Construction Weight Nickel-Coated Copper Non-Conductive Base Fully Encapsulated 9.71 oz, (272g) All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 I s o l a t e d a n d R e gulated 60 WATT Modular DC/DC Converters MECHANICAL DIMENSIONS 3.94 (100.2) FDC60 Dual + Vin - Vin Ctrl Trim + Vout or 3.3 out + Vout or 3.3 out Com Com - Vout or 5 out - Vout or 5 out series 0.05 (1.3) Pin # 1 2 3 4 5 6 7 8 9 10 Single + Vin - Vin Ctrl Trim + Vout + Vout Com Com No Pin No Pin 4 0.98 (25.0) 1.00 (25.4) 1.00 (25.4) 0.39 0.39 0.39 0.39 0.39 0.39 (10.0) (10.0) (10.0) (10.0) (10.0) (10.0) 5 1.00 (25.4) 0.39 0.39 0.39 (10.0) (10.0) (10.0) 1 6 7 2.76(70.0) 2 3 Bottom View Mounting inserts: #4-40 8 9 1.00 (25.4) 10 0.39 (10.0) 3.25 (82.6) 0.30 (7.6) 0.32 (8.0) 0.75 (19.0) All dimensions in Inches (mm) Pin Pitch tolerance ±0.014 (0.35) OUTPUT DERATING CURVE 100 90 80 Output Power (%) 70 60 50 40 30 20 10 0 -25 0 25 50 75 100 125 Ambient Temperature °C 590 LFM Airflow WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181