LFM100-18

1 0 0 W U l t r a m i n i a ture Open Frame Switching Power Supplies LFM100 series Universal 85-265VAC Input High Efficiency Regulated Outputs 3000V Isolation Single Outputs UL60950 & EN60950 Approved 3”W x 5”L x 1.24”H 3”W x 5”L x 1.34”H (5V Output) Model Number Output Voltage Output Amps(max) 0.156” SPACED CONNECTORS LFM100-5 5 VDC LFM100-9 9 VDC LFM100-12 12 VDC LFM100-15 15VDC LFM100-18 18VDC LFM100-24 24VDC LFM100-48 48VDC 20A 11.2A 8.4A 6.7A 5.6A 4.2A 2.1A Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 1 0 0 W U l t r a m i n i a ture Open Frame Switching Power Supplies INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current 85-265 VAC (See Note 2) 47-63 Hz 25A@100V, 50A@200V Input * 3.5mA max. 5 Volt Output LFM100 ACN ACL series MECHANICAL SPECIFICATIONS 0.22 [5.70] 4.55 [115.60] - 5.00[127.00] OUTPUT SPECIFICATIONS Voltage and Current Load Regulation (10%-FL) Line Regulation (LL-HL, FL) Voltage Accuracy Temperature Coefficient Ripple/Noise Short Circuit Protection Over Voltage Protection Hold Up Time See Selection Chart +/- 1% +/- 0.5% +/- 1% +/-0.05%/°C 1% (See Note 1) Continuous Auto Recovery 20 mS, typ @ 115VAC V+ V- 0.06 [1.60] 1 2 3 4 5 6 7 8 0.08 [2.00]max 1.34 [34.00]max 2.55 [64.80] 3.00[76.20] 0.22 [5.70] - ACN ACL 0.22 [5.70] 4.55 [115.60] 5.00[127.00] GENERAL SPECIFICATIONS Input-Out Isolation Efficiency Safety 3000VAC 85%, typ. UL60950, EN60950 0.06 [1.60] 0.08 [2.00]max 1.24 [32.00]max V+ V1 2 3 4 5 6 7 8 0.22 [5.70] 2.55 [64.80] 3.00[76.20] PHYSICAL SPECIFICATIONS Size 5VDC Output All Others Construction 3” x 5” x 1.34” +/-0.04” Tol. 3” x 5” x 1.24” +/-0.04” Tol. Open Frame Pin # 1, 2, 3, 4 5, 6, 7, 8 Output Pin Functions + Output - Output ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Cooling Storage Temperature 0 to +40°C Free Air Convection -20 to +85°C * NOTES: 1) LFM5/9/12: Add a 0.1uF ceramic capacitor and a 220uF E.L.capacitor to output for Ripple & Noise (R & N) measuring @ 20MHz BW. All Others: Add a 0.1uF ceramic capacitor and a 10uF E.L.capacitor to output for Ripple & Noise (R & N) measuring @ 20MHz BW. 2) Connections: AC Input - Molex 5277 or Equivalent DC Output - Molex 5273 or Equivalent Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181