NX15812X

Service Price Delivery 0.5-18 GHz PIN DIODE SWITCHES SP1T — SP2T — SP3T — SP4T SP1T reflective SP2T reflective SP3T reflective SP4T reflective Model No. Frequency Inser tion Loss Isolation VSWR input VSWR output Switching speed (of f-on) Switching speed (on-of f) Control logic TTL DC Power RF Power Peak Power S1517D 0.5-18.0 GHZ 2.5 dB 80 dB, 2-18.0 GHz, 37 dB 5-2.0 GHz 1.8:1 max 1.8:1 max 20 ns max (50% TTL to 90% RF) 20 ns max (50% TTL to 90% RF) 1 line, logic 1 path on +15VDC at 40 mA, -15VDC at 40 mA +10 dBm spec compliant, +30 dBm survival (CW) 75 Watt, 1 µs pulse width S2317D 0.5-18.0 GHZ 2.5 dB 60 dB 2.0:1 max 2.0:1 max 250 ns max (50% TTL to 10% RF) 250 ns max (50% TTL to 10% RF) 2 line, logic 1 path on +5VDC at 40 mA, -15VDC at 40 mA +10 dBm spec compliant +30 dBm survival (CW) 75 Watt, 1 µs pulse width S3317D 0.5-18.0 GHZ 3.0 dB 55 dB 2.0:1 max 2.0:1 max 250 ns max (50% TTL to 10% RF) 250 ns max (50% TTL to 10% RF) 3 line, logic 1 path on+5VDC at 60 mA, -15VDC at 40 mA +10 dBm spec compliant +30 dBm survival (CW) 75 Watt, 1 µs pulse width S4317D 0.5-18.0 GHZ 3.0 dB 55 dB 2.0:1 max 2.0:1 max 250 ns max (50% TTL to 10% RF) 250 ns max (50% TTL to 10% RF) 4 line, logic 1 path on +5VDC at 150 mA, -15VDC at 50 mA +10 dBm spec compliant +38 dBm survival (CW) 75 Watt, 1 µs pulse width Model S2810H Specifications ELECTRO/MECHANICAL SINGLE POLE DOUBLE THROW SWITCHES Operating freq. (GHz): DC-3 3-8 8 - 12 12.4 - 18 VSWR (maximum): 1.2:1 1.3:1 1.4:1 1.5:1 Insertion Loss (max): 0.2 dB 0.3 dB 0.4 dB 0.5 dB Isolation (min.): 80 dB 70 dB 60 dB 60 dB Actuating voltage: 24-30 VDC (28 VDC nominal) Actuating current: 160 mA maximum at 28 VDC and 72 F Impedance: 50 ohms Switching time: 15 ms maximum *Operating mode: Failsafe Operating Temp: -35 °C to +85 °C Operating life: 1,000,000 cycles 18 - 22 1.6:1 0.6 dB 55 dB For Latching Type with Contacts add /L/C after Part Number Ex: S2810H=S2810H/L/C SMA Female Standard CIRCULATOR / ISOLATOR Outline Number 1 2 3 4 5 6 7 Dim. A 2.60 1.62 1.25 1.00 0.75 0.50 0.50 Dim. B 2.60 1.72 1.25 1.00 0.75 0.50 0.62 Dim. C 0.75 0.69 0.70 0.50 0.50 .375 0.50 Dim. D 0.28 0.35 0.25 0.25 0.25 0.19 0.25 Dim. E 0.37 0.35 0.25 0.25 0.25 0.19 0.19 Dim. F 2.00 1.25 0.80 Dim. G 0.30 0.12 .125 .09 .062 .08 .08 Dim. H 2.00 1.38 1.00 0.82 .625 0.34 0.34 Dim. I .17 .17 .17 .17 .17 .17 .17 Dim. J 4-40 x .15 4-40 x .15 2-56 x .14 2-56 x .13 2-56 x .13 0-80 x .10 0-80 x .13 SMA MICROWAVE NOISE GENERATORS SMA (M) 3/4 x 3/4 3.2 max. BNC (F) X type 15.5 dB Noise Figure Meter Compatible Noise Sources Model No. Freq (GHz) Noise Output VSWR(max) Calibration (ENR -dB) ON/OFF Frequencies 15.5 +/-0.5 15.5 +/-0.5 15.5 +/-0.5 15.5 +/-0.5 15.5 +/-0.5 SMA (M) Frequency GHz 1.0-2.0 2.0-4.0 2.6-5.2 3.0-6.0 4.0-8.0 5.0-10.0 6.0-12.0 6.2-18.0 8.0-12.4 8.0-18.0 12.0-18.0 ISO (db) Loss(dB) VSWR Typ. 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.56 1.25 1.40 1.25 Max. 1.35 1.30 1.30 1.30 1.30 1.30 1.30 1.67 1.30 1.50 1.30 Forward Typ. Min. Typ. Max. 20 20 20 20 20 20 20 13 20 16 20 17 18 18 18 18 18 18 12 18 14 18 0.35 0.35 0.35 0.35 0.35 0.35 0.40 0.80 0.40 0.60 0.50 0.5 0.5 0.5 0.5 0.5 0.5 0.6 1.0 0.5 0.7 0.6 Power (Watts) Model Number Load See Note PK CW CW Ciculator Isolator 100 200 300 400 400 400 500 200 200 200 200 25 50 50 50 50 50 50 60 60 60 60 1 1 1 1 1 1 1 1 1 1 1 ATc1-2 ATc2-4 ATc2.6-5.2 ATc3-6 ATc4-8 ATc5-10 ATc6-12 ATc6.2-18 ATc8-12.4 ATc8-18 ATc12-18 ATi1-2 ATi2-4 ATi2.6-5.2 ATi3-6 ATi4-8 ATi5-10 ATi6-12 ATi6.2-18 ATi8-12.4 ATi8-18 ATi12-18 Outline No. 1 2 3 3 4 4 5 6 7 7 7 NX1512X 1-2 NX1524X 2-4 NX1548X 4-8 NX15812X 8-12 NX151218X 12-18 1.20:1 1.20:1 1.20:1 1.35:1 1.35:1 1/2 x 1/2 2.85 max. 1, 1.5, 2 GHz 1 GHz steps SMA (F) Y type High Noise Output Noise Sources Model No. Freq (GHz) Noise Output (ENR -dB) Flatness dB 30-35 30-35 30-35 28-33 28-33 ±1 ±1 ±1 ±1 ±1 Calibration Frequencies 1, 1.5, 2 GHz NX3212Y 1-2 NX3224Y 2-4 NX3248Y 4-8 NX32812Y 8-12 NX321218Y 12-18 1 GHz steps Note: ATM Standard Parts come with SMA Female Connectors In and Out For Male In and Female Out use M/F after Part Number For Female In and Male Out use F/M after Part Number Example: ATc1-2/M/F OPTIONS: 1. X or Y housing may be selected for either series by changing of a model no. suffix 2. For other packages or connectors consult factory 3. Output between 6 dB and listed high output levels of ENRare available on special order Specifications Input power +28VDC at 20 mA max 49 Rider Ave, Patchogue, NY 11772 Phone: 631-289-0363 Fax: 631-289-0358 E-mail: atmemail@juno.com Web: www.atmmicrowave.com 6