AT45DCB008D_08

Features • • • • • MultiMediaCard (MMC) Form Factor Single 2.7V to 3.6V Supply 66 MHz Max Clock Frequency Serial Peripheral Interface (SPI) Compatible Low Power Dissipation – 10 mA Active Read Current Typical – 25 µA CMOS Standby Current Typical • Industrial Temperature Range • Pb-free/RoHS-compliant Package 1. Description The AT45DCB008D, AT45DCB004D and AT45DCB002D are 2.7-volt only SPI compatible serial interface DataFlash® Cards. They are offered in 8-megabyte (64-Mbit), 4-megabyte (32-Mbit) and 2-megabyte (16-Mbit), densities. These 7-pin cards are form factor compatible to the MultiMediaCard standard leveraging on a wide range of low cost connectors that are commercially available. Additionally, the DataFlash Card is pinout compatible to the SPI version of the MMC card. The small form factor and simple interface make the DataFlash Card ideal for a wide variety of data- and program code-storage applications where a removable storage medium is required. Applications range from voice/audio, text or image storage to software applications, system upgrades and software patches. For detailed device specifications, please refer to the corresponding DataFlash datasheets: • AT45DCB008D reference AT45DB642D • AT45DCB004D reference AT45DB321D • AT45DCB002D reference AT45DB161D Table 1-1. Pin # 1 2 3 4 5 6 7 8-megabyte, 4-megabyte, and 2-megabyte 2.7-volt Only DataFlash® Cards AT45DCB008D AT45DCB004D AT45DCB002D Pin Configuration Function Chip Select Serial Input 7654321 Pin Name CS SI GND VCC SCK NC SO Figure 1-1. DataFlash Card - Top View Ground Supply Serial Clock No Connect Serial Output 3607E–DFLASH–01/08 2. Ordering Information fSCK (MHz) 66 Note: ICC (mA) Active 15 Standby 0.05 Ordering Code AT45DCB008D AT45DCB004D AT45DCB002D Package 7DF1(1) Operation Range Industrial (-40° C to 85° C) 1. The 7DF1 is a Pb-free/RoHS-compliant package. Package Type 7DF1 7-lead, 2.5 mm Pitch 24 x 32 x 1.4 mm Body DataFlash Card 2 AT45DCB008D/004D/002D 3607E–DFLASH–01/08 AT45DCB008D/004D/002D 3. Packaging Information 3.1 7DF1 – DataFlash Card E2 LABEL AREA A D D1 3XR1.0 E1 SIDE VIEW R0.25 ALL AROUND E TOP VIEW E3 e B G 1234567 SYMBOL A B C D D1 E COMMON DIMENSIONS (Unit of Measure = mm) MIN 1.30 NOM 1.40 2.40 TYP 4.00 TYP 31.90 32.00 28.00 REF 23.90 24.00 22.00 REF 20.00 REF 15.00 TYP 11.20 REF 8.13 TYP 2.50 TYP 24.10 32.10 MAX 1.50 NOTE C F E1 E2 BOTTOM VIEW E3 F G e 11/10/05 2325 Orchard Parkway San Jose, CA 95131 TITLE 7DF1, 7-pad, 2.5 mm Pitch 24 x 32 x 1.4 mm Body DataFlash Card DRAWING NO. 7DF1 REV. B R 3 3607E–DFLASH–01/08 4. Revision History Revision Level Revision Date A – November 2005 B – March 2006 C – April 2006 D – July 2007 E – January 2008 History Initial release Added text to indicate that DataFlash cards are Pb-free Added text to indicate that DataFlash cards are RoHS compliant Added AT45DCB001D part number. Removed AT45DCB001D part number. 4 AT45DCB008D/004D/002D 3607E–DFLASH–01/08 Headquarters Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 International Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-enYvelines Cedex France Tel: (33) 1-30-60-70-00 Fax: (33) 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Product Contact Web Site www.atmel.com Technical Support dataflash@atmel.com Sales Contact www.atmel.com/contacts Literature Requests www.atmel.com/literature Disclaimer: T he information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. A tmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © 2008 Atmel Corporation. A ll rights reserved. A tmel®, logo and combinations thereof, DataFlash ® a nd others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. 3607E–DFLASH–01/08