AT73C212

Features • • • • • • • • 300 mA/1.9V/2.5V DC to DC Converter 80 mA/2.8V Dual-mode LDO Regulator (LDO1) 130 mA/2.7V/2.8V LDO Regulator (LDO2) 130 mA/2.8V LDO Regulator (LDO3) 130 mA/2.8V LDO Regulator (LDO4) 10 mA/1.8/2.8V Dual-mode LDO Regulator (LDO5) Available in a 5 mm x 5 mm 32-pin QFN or 5 mm x 5 mm 32-ball BGA Package Applications: Mobile Phones, Digital Cameras, PDAs, SmartPhones, DECT Phones, Handset Devices Description The AT73C212 provides a power management solution for integration of multimedia features in mid-level mobile phone handsets. These features may include a camera module (CMOS or CCD), audio generators for a polyphonic or MP3 ringer, a co-processor for JPEG encoding and an external memory module. The AT73C212 contains six power supplies: five linear voltage regulators providing output voltage from 1.8V to 2.8V and output current from 10 mA to 130 mA and a DC DC converter supplying 300 mA from 1.9V or 2.5V. The device is available in two compact, space-saving package options: 32-ball BGA or 32-pin QFN. Power Management for Mobiles (PM) AT73C212 2743A–PMGMT–05/04 Block Diagram Figure 1. AT73C212 Block Diagram AT73C212 Internal High Accuracy Oscillator DC - DC Buck 1.9V or 2.5V 300 mA VOUT0 CREF Internal Voltage Reference LDO1 2.8V 80 mA High Power/Low Power VOUT1 DM DV LDO2 2.7V or 2.8V 130 mA VOUT2 LDO3 2.8V 130 mA VOUT3 LDO4 2.8V 130 mA VOUT4 Main Battery LDO5 1.8V or 2.8V 10 mA High Power/Low Power VOUT5 VBAT Absolute Maximum Ratings Storage Temperature ..................................... -55°C to +150°C Operating Temperature.................................... -40°C to +85°C Power Supply Input..............................................-0.3V to 5.5V *NOTICE: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. IO Input (all except power supply) ......................... -0.3 to 2.8V 2 AT73C212 2743A–PMGMT–05/04 AT73C212 Pin List Table 1. Pin List Ball A1 A2 A3 A4 A5 A6 A7 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 C5 C6 C7 D1 D2 D3 D4 D5 D6 D7 E1 E2 E3 E4 E5 E6 GNDL EN5 Ground I VIND VINE Supply Supply DV ON I I GNDG EN4 GNDH GNDI CAP GNDC Ground I Ground Ground O Ground GNDF Ground VOUT2 EN2 VOUT1 O I O Signal VOUT4 GNDB VINC GNDD VINB VINT GNDE VOUT3 EN3 Type O Ground Supply Ground Supply O Ground O I Description LDO4 output voltage LDO3 and LDO4 ground LDO3 and LDO4 input supply Digital ground LDO1 and LDO2 input supply Decoupling capacitor for internal voltage supply LDO1 and LDO2 ground LDO3 output voltage Enable LDO3 Not connected LDO2 output voltage Enable LDO2 LDO1 output voltage Not connected Analog ground Not connected Analog ground Enable LDO4 Analog ground Analog ground Decoupling capacitor for voltage reference LDO5 ground Not connected Not connected Programmable Voltage Selection Switch on PMU Not connected LDO5 input supply Battery voltage Not connected Not connected Not connected Analog ground Enable LDO5 3 2743A–PMGMT–05/04 Table 1. Pin List Ball E7 F1 F2 F3 F4 F5 F6 F7 G1 G2 G3 G4 G5 G6 G7 VOUT0 DM VINA GNDA O I Supply Ground Reset LX O I Signal VOUT5 Type O Description LDO5 output voltage Not connected Not connected Not connected Not connected Not connected PMU start up OK Inductor connection Not connected Not connected Not connected DCDC output voltage Dual power selection DCDC input supply DCDC ground 4 AT73C212 2743A–PMGMT–05/04 AT73C212 DC to DC Electrical Characteristics TAMB = - 20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. COUT = 22µF - Tantalum - LOUT = 10 uH Table 2. DC to DC Electrical Characteristics Symbol VBAT VOUT VOUT VOUT IOUT ISD Eff ∆VDCLD ∆VTRLD ∆VDCLE ∆VTRLE VOUT VOUT IOUT VDROP IQC ∆VDCLD ∆VTRLD ∆VDCLE ∆VTRLE PSRR ∆VLPFP ∆VFPLP Parameter Operating Supply Voltage Output Voltage Output Voltage Output Voltage Output Current Shut DownCurrent Efficiency Static Load Regulation Transient Load Regulation Static Line Regulation Transient Line Regulation Output Voltage Output Voltage Output Current Dropout Voltage Quiescent Current Static Load Regulation Transient Load Regulation Static Line Regulation Transient Line Regulation Ripple Rejection Overshoot Voltage Undershoot Voltage IOUT = 10 mA to 200 mA @1.9V DC - DC Mode (10% to 90% of IOUT max) DM = 0 DC - DC Mode (10% to 90% of IOUT max) TR =TF = 5 us; DM = 0 DC - DC Mode (10% to 90% of IOUT max, 3.2V to 4.2V) DM = 0 DC - DC Mode (10% to 90% of IOUT max, 3.2V to 4.2V) DM = 0 LDO Mode (DV = 0, DM = 1) LDO Mode (DV = 1, DM = 1) LDO Mode (DM = 1) LDO Mode (DM = 1) LDO Mode (DM = 1) LDO Mode (0 to 10 mA); DM = 1 LDO Mode (0 to 10 mA) , TR = TF = 5 µs, DM = 1 LDO Mode (3.2V to 4.2V); DM = 1 LDO Mode (3.2V to 4.2V); DM = 1 LDO Mode up to 1KHz; DM = 1 Voltage drop from LDO (LP) to DC - DC (FP) Voltage drop from DC - DC (FP) to LDO (LP) - 15 40 45 0 0 10 11 1.75 2.35 85 PWM Mode (DM = 0, DV = 0) Overall accuracy Initial Voltage after Trimming PWM Mode (DV = 1, DM = 0) PWM Mode (DM = 0) 2.45 Conditions Min 3 1.80 1.90 1.9 ± 2% 2.50 150 0.1 90 7 30 20 35 1.80 2.40 1.85 2.45 10 400 14 50 10 8 15 2.55 300 1 Typ Max 5.5 2.0 Unit V V V V mA µA % mV mV mV mV V V mA mV µA mV mV mV mV dB mV mV Table 3. DC to DC External Components Symbol COUT CESR LOUT LESR Parameter Output Capacitor Value Output Capacitor ESR Output Inductor Value Output Inductor ESR At 100 kHz 8 10 Conditions Min 17 Typ 22 Max 26 100 12 1.1 Unit µF mOhm µH Ohm 5 2743A–PMGMT–05/04 LDO1 Electrical Characteristics TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. Table 4. LDO1 Electrical Characteristics Symbol VBAT VOUT VOUT IOUT IOUT IQC IQC ∆VOUT ∆VPEAK ∆VOUT ∆VPEAK ∆VOUT Parameter Operating Supply Voltage Output Voltage Full Power Mode Output Voltage Low Power Mode Output Current Full Power Mode Output Current Low Power Mode Quiescent Current FP Mode Quiescent Current LP Mode Line Regulation FP Mode Line Regulation Transient FP Mode Line Regulation LP Mode Line Regulation Transient LP Mode Load Regulation FP Mode DM = 0 DM = 1 DM = 0 DM = 1 DM = 0 DM = 1 VBAT: 3.4V to 3V, IOUT = 80 mA, DM = 0 VBAT: From 5V to 5.4V and from 3.4V to 3V, IOUT = 80 mA, TR = TF = 5 µs, DM = 0 VBAT: 3.4V to 3V, IOUT = 5 mA, DM = 1 VBAT: From 5V to 5.4V and from 3.4V to 3V, IOUT = 5 mA, TR = TF = 5 µs, DM = 1 From 0 to 80 mA and from 90% to 10% IOUT, VBAT = 3.4V, DM = 0 From 0 to IOUT(MAX) and from 90% to 10% IOUT(MAX), TR = TF = 5 µs, VBAT = 3.4V, DM = 0 From 0 to 80 mA & from 90% to 10% IOUT(MAX), VBAT = 3.4V, DM = 1 F = 217 Hz BW: 10 Hz to 100 kHz BW: 10 Hz to 100 kHz IOUT = IOUT(MAX) IOUT = IOUT(MAX) 70 50 40 45 80 300 130 170 1 100 130 25 9 30 11 Conditions Min 3 2.7 2.7 2.8 2.8 50 Typ Max 5.5 2.9 2.9 80 10 36 13 1 2.7 2 4 2.9 (4.2 at 5.5V) 23 Unit V V V mA mA µA µA mV mV mV mV mV ∆VPEAK Load Regulation Transient FP Mode mV ∆VOUT Load Regulation LP Mode 5 (7.8 at 5.5V) mV PSRR VN VN TR TR ISD ISC Ripple Rejection Output Noise FP mode Output Noise LP Mode Rise Time FP Rise Time LP Shut Down Current Short Circuit Current dB µVRMS µVRMS µs µs µA mA Table 5. LDO1 External Components Symbol COUT CESR Parameter Output Capacitor Value Output Capacitor ESR 100 kHz Conditions Min 1.98 Typ 2.2 Max 2.42 50 Unit µF mOhm 6 AT73C212 2743A–PMGMT–05/04 AT73C212 LDO2 Electrical Characteristics TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. Table 6. LDO2 Electrical Characteristics Symbol VBAT VOUT VOUT IOUT IQC ∆VOUT ∆VPEAK ∆VOUT Parameter Operating Supply Voltage Output Voltage Output Voltage Output Current Quiescent Current Line Regulation Line Regulation Transient Load Regulation VBAT: 3V to 3.4V, IOUT = 130 mA Same as above, TR = TF = 5 µs 10% - 90% IOUT; VBAT = 3V 10% - 90% IOUT; VBAT = 5.0V 10% - 90% IOUT; VBAT = 5.5V ∆VPEAK PSRR VN TR ISD Load Regulation Transient Ripple rejection Output Noise Rise Time Shut Down Current Same as above, TR = TF = 5 µs F = 217 Hz, VBAT = 3.6V BW: 10 Hz to 100 kHz 100% IOUT, 10% - 90% VOUT 1.2 70 29 DV = 0 DV = 1 Conditions Min 3 2.65 2.75 2.70 2.80 80 195 1 1.5 Typ Max 5.5 2.75 2.85 130 236 2 2.85 1 1 1 2.4 73 37 50 1 Unit V V V mA µA mV mV mV mV mV mV dB µVRMS µs µA Table 7. LDO2 External Components Symbol COUT CESR Parameter Output Capacitor Value Output Capacitor ESR 100 kHz Conditions Min 1.98 Typ 2.2 Max 2.42 50 Unit µF mOhm 7 2743A–PMGMT–05/04 LDO3 Electrical Characteristics TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. Table 8. LDO3 Electrical Characteristics Symbol VBAT VOUT IOUT IQC ∆VOUT ∆VPEAK ∆VOUT Parameter Operating Supply Voltage Output Voltage Output Current Quiescent Current Line Regulation Line Regulation Transient Load Regulation VBAT: 3V to 3.4V, IOUT = 130 mA Same as above, TR = TF = 5 µs 10% - 90% IOUT; VBAT = 3V 10% - 90% IOUT; VBAT = 5.0V 10% - 90% IOUT; VBAT = 5.5V ∆VPEAK PSRR VN TR ISD Load Regulation Transient Ripple rejection Output Noise Rise Time Shut Down Current Same as above, TR = TF = 5 µs F = 217 Hz, VBAT = 3.6V BW: 10 Hz to 100 kHz 100% IOUT, 10% - 90% VOUT 70 1.2 73 29 37 50 1 Conditions Min 3 2.74 2.8 80 195 1 1.5 Typ Max 5.5 2.86 130 236 2 2.85 1 1 1 2.4 Unit V V mA µA mV mV mV mV mV mV dB µVRMS µs µA Table 9. LDO3 External Components Symbol COUT CESR Parameter Output Capacitor Value Output Capacitor ESR 100 kHz Conditions Min 1.98 Typ 2.2 Max 2.42 50 Unit µF mOhm 8 AT73C212 2743A–PMGMT–05/04 AT73C212 LDO4 Electrical Characteristics TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. Table 10. LDO4 Electrical Characteristics Symbol VBAT VOUT IOUT IQC ∆VOUT ∆VPEAK ∆VOUT Parameter Operating Supply Voltage Output Voltage Output Current Quiescent Current Line Regulation Line Regulation Transient Load Regulation VBAT: 3V to 3.4V, IOUT = 130 mA Same as above, TR = TF = 5 µs 10% - 90% IOUT; VBAT = 3V 10% - 90% IOUT; VBAT = 5.0V 10% - 90% IOUT; VBAT = 5.5V ∆VPEAK PSRR VN TR ISD Load Regulation Transient Ripple rejection Output Noise Rise Time Shut Down Current Same as above, TR = TF = 5 µs F = 217 Hz, VBAT = 3.6V BW: 10 Hz to 100 kHz 100% IOUT, 10% - 90% VOUT 70 1.2 73 29 37 50 1 Conditions Min 3 2.74 2.8 80 195 1 1.5 Typ Max 5.5 2.86 130 236 2 2.85 1 1 1 2.4 Unit V V mA µA mV mV mV mV mV mV dB µVRMS µs µA Table 11. LDO4 External Components Symbol COUT CESR Parameter Output Capacitor Value Output Capacitor ESR 100 kHz Conditions Min 1.98 Typ 2.2 Max 2.42 50 Unit µF mOhm 9 2743A–PMGMT–05/04 LDO5 Electrical Characteristics TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. Table 12. LDO5 Electrical Characteristics Symbol VBAT VOUT VOUT ISD IQC IOUT ISC Parameter Operating Supply Voltage Output Voltage Output Voltage Shut Down Current Low Power Quiescent Current Output Current Short Circuit Current IOUT < 10mA, DV = 0 IOUT < 10 mA, DV = 1 Conditions Min 3 1.71 2.74 1.8 2.8 0.1 8 10 40 Typ Max 5.5 1.89 2.86 1 9.5 Unit V V V µA µA mA mA Table 13. LDO5 External Components Symbol COUT CESR Parameter Output Capacitor Value Output Capacitor ESR 100 kHz Conditions Min 198 Typ 220 Max 242 50 Unit nF mOhm 10 AT73C212 2743A–PMGMT–05/04 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-30-00 Fax: (33) 4-76-58-34-80 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Literature Requests www.atmel.com/literature Disclaimer: A tmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. © Atmel Corporation 2004 . A ll rights reserved. A tmel ® a nd combinations thereof are the registered trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of others. Printed on recycled paper. 2743A–PMGMT–05/04