AT94K10

Features • Monolithic Field Programmable System Level Integrated Circuit (FPSLIC®) – AT40K SRAM-based FPGA with Embedded High-performance RISC AVR® Core, Extensive Data and Instruction SRAM and JTAG ICE 5,000 to 40,000 Gates of Patented SRAM-based AT40K FPGA with FreeRAM™ – 2 - 18.4 Kbits of Distributed Single/Dual Port FPGA User SRAM – High-performance DSP Optimized FPGA Core Cell – Dynamically Reconfigurable In-System – FPGA Configuration Access Available On-chip from AVR Microcontroller Core to Support Cache Logic® Designs – Very Low Static and Dynamic Power Consumption – Ideal for Portable and Handheld Applications Patented AVR Enhanced RISC Architecture – 120+ Powerful Instructions – Most Single Clock Cycle Execution – High-performance Hardware Multiplier for DSP-based Systems – Approaching 1 MIPS per MHz Performance – C Code Optimized Architecture with 32 x 8 General-purpose Internal Registers – Low-power Idle, Power-save and Power-down Modes – 100 µA Standby and Typical 2-3 mA per MHz Active Up to 36 Kbytes of Dynamically Allocated Instruction and Data SRAM – Up to 16 Kbytes x 16 Internal 15 ns Instructions SRAM – Up to 16 Kbytes x 8 Internal 15 ns Data SRAM JTAG (IEEE std. 1149.1 Compliant) Interface – Extensive On-chip Debug Support – Limited Boundary-scan Capabilities According to the JTAG Standard (AVR Ports) AVR Fixed Peripherals – Industry-standard 2-wire Serial Interface – Two Programmable Serial UARTs – Two 8-bit Timer/Counters with Separate Prescaler and PWM – One 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes and Dual 8-, 9- or 10-bit PWM Support for FPGA Custom Peripherals – AVR Peripheral Control – 16 Decoded AVR Address Lines Directly Accessible to FPGA – FPGA Macro Library of Custom Peripherals 16 FPGA Supplied Internal Interrupts to AVR Up to Four External Interrupts to AVR 8 Global FPGA Clocks – Two FPGA Clocks Driven from AVR Logic – FPGA Global Clock Access Available from FPGA Core Multiple Oscillator Circuits – Programmable Watchdog Timer with On-chip Oscillator – Oscillator to AVR Internal Clock Circuit – Software-selectable Clock Frequency – Oscillator to Timer/Counter for Real-time Clock VCC: 3.0V - 3.6V 3.3V 33 MHz PCI-compliant FPGA I/O – 20 mA Sink/Source High-performance I/O Structures – All FPGA I/O Individually Programmable High-performance, Low-power 0.35µ CMOS Five-layer Metal Process State-of-the-art Integrated PC-based Software Suite including Co-verification 5V I/O Tolerant Green (Pb/Halide-free/ROHS compliant) Package Options Available • • • • • 5K - 40K Gates of AT40K FPGA with 8-bit Microcontroller, up to 36K Bytes of SRAM and On-chip JTAG ICE AT94KAL Series Field Programmable System Level Integrated Circuit Summary • • • • • • • • • • • 1138IS–FPSLI–1/08 Note: This is a summary document. A complete document is available on our web site at www.atmel.com. 1. Description The AT94KAL Series FPSLIC family shown in Table 1-1 is a combination of the popular Atmel AT40K Series SRAM FPGAs and the high-performance Atmel AVR 8-bit RISC microcontroller with standard peripherals. Extensive data and instruction SRAM as well as device control and management logic are included on this monolithic device, fabricated on Atmel’s 0.35µ five-layer metal CMOS process. The AT40K FPGA core is a fully 3.3V PCI-compliant, SRAM-based FPGA with distributed 10 ns programmable synchronous/asynchronous, dual-port/single-port SRAM, 8 global clocks, Cache Logic ability (partially or fully reconfigurable without loss of data) and 5,000 to 40,000 usable gates. Table 1-1. Device FPGA Gates The AT94K Series Characteristics AT94K05AL 5K 256 2048 436 96 8 4 Kbytes - 16 Kbytes 4 Kbytes - 16 Kbytes Yes Yes 2 Yes 3 Yes Yes @ 25 MHz (1) AT94K10AL 10K 576 4096 846 116 16 20 Kbytes - 32 Kbytes 4 Kbytes- 16 Kbytes Yes Yes 2 Yes 3 Yes Yes (1) AT94K40AL 40K 2304 18432 2862 120 16 20 Kbytes - 32 Kbytes 4 Kbytes - 16 Kbytes Yes Yes 2 Yes 3 Yes Yes(1) 19 MIPS 3.0 - 3.6V FPGA Core Cells FPGA SRAM Bits FPGA Registers (Total) Maximum FPGA User I/O AVR Programmable I/O Lines Program SRAM Data SRAM Hardware Multiplier (8-bit) 2-wire Serial Interface UARTs Watchdog Timer Timer/Counters Real-time Clock JTAG ICE Typical AVR throughput Operating Voltage Notes: 19 MIPS 3.0 - 3.6V 19 MIPS 3.0 - 3.6V 1. FPSLIC parts with JTAG ICE support can be identified by the letter “J” after the device date code, e.g., 4201 (no ICE support) and 4201J (with ICE support), see Figure 1-1. 2 AT94KAL Series FPSLIC Summary 1138IS–FPSLI–1/08 AT94KAL Series FPSLIC Summary Figure 1-1. FPSLIC Device Date Code with JTAG ICE Support ® AT94K40AL-25DQC 0H1230 4201J Date Code "J" indicates JTAG ICE support The AT94K series architecture is shown in Figure 1-2. Figure 1-2. AT94K Series Architecture PROGRAMMABLE I/O 5 - 40K Gates FPGA Up to 16 Addr Decoder Up to 16K x 16 Program SRAM Memory Up to 16 Interrupt Lines 4 Interrupt Lines 2-wire Serial Unit I/O I/O with Multiply Two 8-bit Timer/Counters JTAG ICE Up to 16K x 8 Data SRAM 16 Prog. I/O Lines I/O 3 1138IS–FPSLI–1/08 The embedded AVR core achieves throughputs approaching 1 MIPS per MHz by executing powerful instructions in a single-clock cycle, and allows system designers to optimize power consumption versus processing speed. The AVR core is based on an enhanced RISC architecture that combines a rich instruction set with 32 general-purpose working registers. All 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code-efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers at the same clock frequency. The AVR executes out of on-chip SRAM. Both the FPGA configuration SRAM and the AVR instruction code SRAM can be automatically loaded at system power-up using Atmel’s In-System Programmable (ISP) AT17 Series EEPROM Configuration Memories. State-of-the-art FPSLIC design tools, System Designer, were developed in conjunction with the FPSLIC architecture to help reduce overall time-to-market by integrating microcontroller development and debug, FPGA development and Place and Route, and complete system co-verification in one easy-to-use software tool. Table 1-2. FPSLIC Configuration Devices FPSLIC Configuration Device AT17LV256 AT17LV512 AT17LV010 Configuration Data 226520 Bits 430488 Bits 815382 Bits Spare Memory 35624 Bits 93800 Bits 233194 Bits FPSLIC Device AT94K05 AT94K10 AT94K40 4 AT94KAL Series FPSLIC Summary 1138IS–FPSLI–1/08 Headquarters Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 International Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-enYvelines Cedex France Tel: (33) 1-30-60-70-00 Fax: (33) 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Product Contact Web Site www.atmel.com Technical Support fpslic@atmel.com Sales Contact www.atmel.com/contacts Literature Requests www.atmel.com/literature Disclaimer: T he information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © Atmel Corporation 2008. All rights reserved. A tmel®, logo and combinations thereof, Everywhere You Are ® a nd others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Microsoft ®, Windows ® a nd Windows NT® a re the registered trademarks of Microsoft Corporation. Other terms and product names may be trademarks of others. 1138IS–FPSLI–1/08