ATMEGA128RFA1_11

ATmega128RFA1 Features • High Performance, Low Power AVR 8-Bit Microcontroller • Advanced RISC Architecture - 135 Powerful Instructions – Most Single Clock Cycle Execution - 32x8 General Purpose Working Registers - Fully Static Operation - Up to 16 MIPS Throughput at 16 MHz and 1.8V - On-Chip 2-cycle Multiplier • Non-volatile Program and Data Memories - 128K Bytes of In-System Self-Programmable Flash • Endurance: 1000 Write/Erase Cycles @ 125° (2000 Cycles @ 85° C C) - 4K Bytes EEPROM • Endurance: 1000 Write/Erase Cycles @ 125° (2000 Cycles @ 85° C C) - 16K Bytes Internal SRAM • JTAG (IEEE std. 1149.1 compliant) Interface - Boundary-scan Capabilities According to the JTAG Standard - Extensive On-chip Debug Support - Programming of Flash EEPROM, Fuses and Lock Bits through the JTAG interface • Peripheral Features - Multiple Timer/Counter & PWM channels - Real Time Counter with Separate Oscillator - 10-bit, 330 ks/s A/D Converter; Analog Comparator; On-chip Temperature Sensor - Master/Slave SPI Serial Interface - Two Programmable Serial USART - Byte Oriented 2-wire Serial Interface • Advanced Interrupt Handler • Watchdog Timer with Separate On-Chip Oscillator • Power-on Reset and Low Current Brown-Out Detector • Advanced Power Save Modes • Fully integrated Low Power Transceiver for 2.4 GHz ISM Band - Supported Data Rates: 250 kb/s and 500 kb/s, 1 Mb/s, 2 Mb/s - -100 dBm RX Sensitivity; TX Output Power up to 3.5 dBm - Hardware Assisted MAC (Auto-Acknowledge, Auto-Retry) - 32 Bit IEEE 802.15.4 Symbol Counter - Baseband Signal Processing - SFR-Detection, Spreading; De-Spreading; Framing ; CRC-16 Computation - Antenna Diversity and TX/RX control - TX/RX 128 Byte Frame Buffer • Hardware Security (AES, True Random Generator) • Integrated Crystal Oscillators (32.768 kHz & 16 MHz, external crystal needed) • I/O and Package - 38 Programmable I/O Lines - 64-pad QFN (RoHS/Fully Green) • Temperature Range: -40° to 125° Industrial C C • Supply voltage range 1.8V to 3.6V with integrated voltage regulators • Ultra Low Power consumption (1.8 to 3.6V) for Rx/Tx & AVR: