ATS-HP-D3TOOL-C1-R0

HEAT PIPE BENDER Heat Pipe Bender Precision Heat Pipe Bending Tool The ATS Heat Pipe Bender is a precision engineering tool designed to give engineers and technicians accurate and thermally reliable heat pipe bends. The tool gives the user the ability to apply the right amount of leverage and torque in order to get the right bend. The tool also stops a user from over bending and thus reducing the heat pipes thermal performance. *Image for illustration purposes only BENDING TIPS » Bend Radius FEATURES AND BENEFITS »  Made from aluminum and hard anodized for durable, long use » Any round heat pipe size in the ATS heat pipe family can be used » Other manufacturers round heat pipes may be used, providing they are within the same size ranges as ATS’ » Tool prevents the collapse of the heat pipe during bending » Mountable to lab benches, vises, production workstations and other fixtures » Custom mounting approaches available » Both the measure arm and the bending arm are attached to the fixture with screws to the appropriate bend radius position. » Bending Angle Supported: 10 to 170 degrees » Minimum bend radius is 2.5x the diameter of the heat pipe being bent. The tool provides 2 bend radii 2.5x and 3x heat pipe diameter Qmax Every 45 degree bend reduces Qmax by about 2.5% » Use Care! To insure the best result please use care when inserting  ustomization »C Available! ATS will develop custom mounting! Heat Pipe Bender Part Number Diameter of Heat Pipe that Tool Can Bend (mm) Inside Bend Radii (mm) Bend Angle Radii (degree) ATS-HP-D3TOOL 3 7.5 and 9 10 to 170 ATS-HP-D4TOOL 4 10 and 12 10 to 170 »A  ll ATS Round Heat ATS-HP-D5TOOL 5 12.5 and 15 10 to 170 »O  ther manufactur- ATS-HP-D6TOOL 6 15 and 18 10 to 170 ATS-HP-D7TOOL 7 17.5 and 21 10 to 170 ATS-HP-D8TOOL 8 20 and 24 10 to 170 ATS-HP-D9TOOL 9 22.5 and 27 10 to 170 ATS-HP-D10TOOL 10 25 and 30 10 to 170 ATS-HP-D12TOOL 12 30 and 36 10 to 170 COMPATIBILITY Pipes ers round heat pipes within ATS size ranges »C  an be used with other manufacturers heat pipes outside the ATS HP size range at user’s discretion. ATS does not advise this nor does ATS warranty that it will work nor will we take liability 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 ATS-HQ@QATS.COM | WWW.QATS.COM R6_032