ATS-HP-D8TOOL

HEAT PIPE BENDER Heat Pipe Bender Precision Heat Pipe Bending Tool The ATS Heat Pipe Bender is a precision engineering tool designed to give engineers and technicians accurate and thermally reliable heat pipe bends. The tool gives the user the ability to apply the right amount of leverage and torque in order to get the right bend. The tool also stops a user from over bending and thus reducing the heat pipes thermal performance. *Image for illustration purposes only Minimum bend radius is 3x the diameter of the heat pipe being bent FEATURES AND BENEFITS » Qmax »  Made from aluminum and hard anodized for durable, long use » Any round heat pipe size in the ATS heat pipe family can be used » Other manufacturers round heat pipes may be used, providing they are within the same size ranges as ATS’ » Tool allows for a smooth, accurate bending motion to reduce marks on the tube » Mountable to lab benches, vices, production workstations and other fixtures » Custom mounting approaches available » Easy to use, simply set the measure arm to the length of the target heat pipe, and then chose and screw down the appropriate bend radius. Every 45 degree bend reduces Qmax by about 2.5% » Use Care! To insure the best result please use care when inserting or removing the heat pipe » Customization Available! ATS will develop custom mounting COMPATIBILITY » A ll ATS Round Heat » Bending Angle Supported: 10 to 170 degrees Heat Pipe Bender Part Number BENDING TIPS »B  end Radius Pipes Heat Pipe Inside Bend Bend Angle Diameter Tool Radii (mm) Range (degree) Can Bend (mm) ATS-HP-D4TOOL-C1-R0 4 10 and 12 10 to 170 ATS-HP-D6TOOL-C1-RO 6 15 and 18 10 to 170 ATS-HP-D8TOOL-C1-R0 8 20 and 24 10 to 170 »O  ther manufacturers round heat pipes within ATS size ranges » C an be used with other manufacturers heat pipes outside the ATS HP size range at user’s discretion. ATS does not advise this nor does ATS warranty that it will work nor will we take liability for problems resulting from such use. 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 ATS-HQ@QATS.COM | WWW.QATS.COM R3_0820