S324

Semiconductor S324 Low Power Quad OP AMP Description The S324 consists of four independent high gain Internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltage. Features • • • • • • Input common mode voltage range includes ground Internally frequency compensated for unity gain Large DC voltage gain : 100dB Wide bandwidth for unity gain : 1 MHz Very low power consumption Wide supply voltage range : Single : 3V ~ 36V, Dual : ±1.5 ~ ±18V Applications • Transducer amplifier • DC gain blocks • Conventional operational amplifiers Ordering Information Type NO. S324 Marking S324 Package Code SOP-14 Outline Dimensions unit : mm Block Diagram KSI-K001-001 1 S324 Absolute maximum ratings Characteristic Supply voltage Differential input voltage Input voltage Power Dissipation Operating temperature Storage temperature Symbol VCC VIND VIN PD Topr Tstg Ratings 36 or ±18 36 -0.3 ~ +36 300 -40 ~ +85 -55 ~ 150 Unit V V V mW °C °C Electrical Characteristics (Unless otherwise specified. VCC = 5V, VEE = GND and –40 °C ≤ Ta ≤ +85 °C) Characteristic Input offset voltage Symbol VIOS IIOS IIB VICR ICC GV Test Condition VCC = 5~30V Rg = 0Ω - Min. Typ. Max. 2 7 Unit mV Input offset current - 5 30 nA Input bias current Input common mode voltage range Supply current Large signal voltage gain VCC = 30V RL = ∞, All Channel VCC = 15V RL ≥ 2 KΩ VCC = 30V RL=2 KΩ RL=10 KΩ VCC =5V, RL ≤10 KΩ (Ta=25 °C) (Ta=25 °C) VCC = 15V VIN+ = 1V, VIN- = 0V VCC = 15V VIN+ = 0V, VIN- = 1V VOUT = 200mV, VIN+= 0V, VIN-= 1V, VCC= 15V 0 86 26 27 65 65 20 45 0.7 100 28 5 85 100 40 150 VCC –1.5 1.2 20 - nA V mA dB Output voltage swing VOH VOL V mV dB dB mA Common mode rejection ratio Power supply rejection ratio Output source current CMRR PSRR IO+ 10 20 - mA µA Output sink current IO- 12 45 - KSI-K001-001 2 S324 Electrical Characteristic Curves Fig. 1 ICC-VCC Fig. 2 IIB-VCC Fig. 3 VIOS-Ta Fig. 4 IO-Ta Fig. 5 CMRR-f Fig. 6 VOR-f KSI-K001-001 3 S324 These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KSI-K001-001 4