SB2321E-H

Semiconductor SB2321E-H Side View LED Features • 2.8mm(L)×1.2mm(W) small size surface mount type • Thin package of 0.8mm(H) thickness • Transparency SMD side view type • Wide viewing angle : 110O • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Outline Dimensions unit : mm 2.40 ~ 2.60 B' A B 2.70 ~ 2.90 A' 0.80 Typ. 1.40 Typ. 2.33 ~ 2.53 < A - A'> 0.50 ~ 0.60 2 0.70 ~ 0.90 1.10 ~ 1.30 1 0.4 Typ. 2.33 ~ 2.53 < B - B'> (2) (1) PIN Connections 1. Anode 2. Cathode KSD-O8K002-001 1 SB2321E-H Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Operating temperature range Storage temperature range 2 1 (Ta=25℃) Symbol PD IF IFP Topr Tstg Rating 90 25 50 -30∼85 -40∼100 Unit mW mA mA ℃ ℃ * Soldering temperature Tsol 240℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended reflow soldering temperature profile - Preheating 150℃ to 185℃ within 120 seconds soldering 240℃ within 10 seconds Gradual cooling (Avoid quenching) Temp (℃) 240 Peak Temp max. 240℃ Preheating area 150~185℃, 90±30sec 185 150 max. 3℃/sec max. 4℃/sec Time from 25℃ to Peak Temperature max. 6min 0 60 150 180 240 Time (sec) max. -6℃/sec max. 10sec Solder area 220℃, max. 60sec 25 Electrical / Optical Characteristics Characteristic Forward voltage (Ta=25℃) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA IF= 20mA Min 3.0 68 460 - Typ 465 35 ±55 Max 3.6 230 470 - Unit V mcd nm nm deg *3Luminous intensity Dominant wavelength Spectrum bandwidth λD ∆λ θ1/2 *4Half angle KSD-O8K002-001 2 SB2321E-H *3. Luminous intensity maximum tolerance for each grade classification limit is ±18% (The test result of IF=20mA is only for reference) *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ● VF / IV / λD Grade Classification (Ta=25℃) Test Condition @ IF = 20mA Forward Voltage [V] Luminous Intensity [mcd] K : 68~100 Dominant Wavelength [nm] 1 : 3.0~3.3 L : 100~155 2 : 3.3~3.6 M : 155~230 a : 460~465 b : 465~470 (Do not use to combine grade classification. It must be used separately grade classification) KSD-O8K002-001 3 SB2321E-H Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Forward Voltage VF [V] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Relative Intensity [%] Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5-1 Radiation Diagram(X) Relative Luminous Intensity Iv [%] KSD-O8K002-001 4 SB2321E-H The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O8K002-001 5