SB3317E-HB

Semiconductor SB3317E-H / SB3317E-H(B) High Brightness LED Lamp Features • Colorless transparency lens type • φ3mm(T-1) all plastic mold type • Super luminosity • E ; ESD Protected (±2.0KV, 3 times @100pF, 1.5KΩ) Outline Dimensions STRAIGHT TYPE 2.80~3.20 unit : mm STOPPER TYPE : (B) 2.80~3.20 5.10 ~ 5.50 2.70 ~ 3.10 5.10 ~ 5.50 2.70 ~ 3.10 1.20 Min. 4.70 ~ 5.70 0.70 M ax. 1.27 Typ. 23.00 Min. 0.70 23.00 M ax. Min. 1.00 Min. 1.00 Min. 2.54 Typ. 2.54 Typ. 3.50 ~ 3.90 M ax. 3.50 ~ 3.90 M ax. 12 3.60 ~ 4.00 12 3.60 ~ 4.00 PIN Connections 1. Anode 2. Cathode 0.45 KSD-O2B003-000 0.45 1 SB3317E-H / SB3317E-H(B) Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Reverse voltage Operating temperature range Storage temperature range * Soldering temperature 2 1 (Ta=25oC) Symbol PD IF IFP VR Topr Tstg Tsol Rating 75 20 50 4 -25∼85 -30∼100 260℃ for 10 seconds Unit mW mA mA V ℃ ℃ *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package ※ Recommend document -. LED is very sensitive to ESD. Electrical / Optical Characteristics Characteristic Forward voltage * Luminous intensity Dominant wavelength Spectrum bandwidth Reverse current * Half angle 3 4 (Ta=25oC) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA VR=4V IF= 20mA Min. 2.9 230 460 - Typ. 468 26 ±22 Max. 3.8 1170 475 10 - Unit V mcd nm nm uA deg λD ∆λ IR θ1/2 *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% ● VF / IV / λD Grade Classification Test Condition @IF = 20mA Luminous Intensity [mcd] N : 230~350 O : 350~520 2 : 3.2~3.5 P : 520~780 3 : 3.5~3.8 Q : 780~1170 c : 470~475 b : 465~470 Dominant Wavelength [nm] a : 460~465 Forward Voltage [V] 1 : 2.9~3.2 (Do not use to combine grade classification. It must be used separately grade classification) KSD-O2B003-000 2 SB3317E-H / SB3317E-H(B) Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Forward Voltage VF [V] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KSD-O2B003-000 3 SB3317E-H / SB3317E-H(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2B003-000 4