SB3318E-GB

Semiconductor SB3318E-G / SB3318E-G(B) High Brightness LED Lamp Features • Colorless transparency lens type • φ3mm(T-1) all plastic mold type • Super luminosity • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Outline Dimensions unit : mm STRAIGHT TYPE Ø2.74~3.14 STOPPER TYPE : (B) Ø2.74~3.14 3.90~4.30 2.70~3.10 1.20 Min. 3.90~4.30 2.70~3.10 5.00~6.00 0.70 Max. 23.00 Min. 1.27 Typ. 23.00 Min. 0.70 Max. 1.00 Min. 2.54 Typ. 1.00 Min. 2.54 Typ. 0.45 Max. 3.60~4.00 0.45 Max. 12 3.50~3.90 12 3.50~3.90 3.60~4.00 PIN Connections 1. Anode 2. Cathode KSD-O2C001-000 1 SB3318E-G / SB3318E-G(B) Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Reverse voltage Operating temperature range Storage temperature range 1 (Ta=25oC) Symbol PD IF IFP VR Topr Tstg Rating 75 20 50 4 -25∼85 -30∼100 Unit mW mA mA V ℃ ℃ 260℃ for 10 seconds Soldering temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package ※ Recommend document -. LED is very sensitive to ESD. Electrical / Optical Characteristics Characteristic Forward Voltage (Ta=25oC) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA VR=4V IF= 20mA Min. 2.9 100 460 - Typ. 26 ±45 Max. 3.8 350 475 10 - Unit V mcd nm nm uA deg * Luminous Intensity *3 2 Dominant Wavelength Spectrum Bandwidth Reverse Current λD ∆λ IR θ1/2 * Half angle 4 *2. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *3. Dominant Wavelength Maximum tolerance for each Grade Classification limit is ±1nm *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ● VF / IV / λD Grade Classification (Ta=25℃) Test Condition @IF = 20mA Forward Voltage [V] 1 : 2.9~3.2 2 : 3.2~3.5 3 : 3.5~3.8 Luminous Intensity [mcd] L : 100~155 M : 155~230 N : 230~350 Dominant eavelength [nm] a : 460~465 b : 465~470 c : 470~475 (Do not use to combine grade classification. It must be used separately grade classification) KSD-O2C001-000 2 SB3318E-G / SB3318E-G(B) Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Forward Current IF [mA] Forward Voltage VF [V] Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] IF=20mA Relative Intensity [%] Forward Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KSD-O2C001-000 3 SB3318E-G / SB3318E-G(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2C001-000 4