SBT42_1

Semiconductor SBT42 NPN Silicon Transistor Descriptions • High voltage application • Telephone application Features • Collector-Emitter voltage VCEO=SBT42 : 300V • Complementary pair with SBT92 Ordering Information Type NO. SBT42 Marking M1A Package Code SOT-23 Outline Dimensions unit : mm 1 3 2 PIN Connections 1. Base 2. Emitter 3. Collector KST-2040-003 1 SBT42 Absolute maximum ratings Characteristic Collector-Base voltage Collector-Emitter voltage Emitter-Base voltage Collector current Emitter Current Collector dissipation Junction temperature Storage temperature * ： Package Mounted on 99.5% Alumina 10×8×0.6mm (Ta=25°C) Symbol VCBO VCEO VEBO IC IE PC* Tj Tstg Ratings 300 300 6 500 -500 350 150 -55~150 Unit V V V mA mA mW °C °C Electrical Characteristics Characteristic Collector-Base breakdown voltage Collector-Emitter breakdown voltage Emitter-Base breakdown voltage Collector cut-off current Emitter cut-off current DC current gain Collector-Emitter saturation voltage Base-Emitter saturation voltage Transition frequency Collector output capacitance (Ta=25°C) Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE * * * Test Condition IC=100µA, IE=0 IC=1mA, IB=0 IE=100µA, IC=0 VCB=300V, IE=0 VEB=6V, IC=0 VCE=10V, IC=30mA IC=20mA, IB=2mA IC=20mA, IB=2mA VCE=20V, IC=10mA VCB=20V, IE=0, f=1MHz Min. Typ. Max. 300 300 6 40 50 0.1 0.1 0.5 0.9 3 Unit V V V µA µA V V MHz pF VCE(sat) fT Cob VBE(sat) * ： Pulse Tester： Pulse Width ≤ 300 ㎲, Duty Cycle≤ 2.0% KST-2040-003 2 SBT42 Electrical Characteristic Curves Fig. 1 hFE - IC Fig. 2 VCE(sat),VBE(sat) - IC Fig. 3 fT - IC Fig. 4 COb - VR KST-2040-003 3 SBT42 These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-2040-003 4