SF1A600H

Semiconductor SF1A600H Ultra Fast Recovery Diode Applications • High speed switching and rectification • Switching mode power supply Features • Ultra-fast reverse recovery time: trr=35ns Max. • Small & compact type SMD package • Low reverse current & low switching loss Ordering Information Type No. SF1A600H Marking 1A6H Package Code SOD-106 Outline Dimensions unit : mm 4.60~5.00 3.90~4.10 1.49 Max. 2.50~2.70 ● PIN Connections 1.25~1.35 0.27 Max. Cathode Mark 2 1 1. Anode 2. Cathode KSD-D6A006-000 1 SF1A600H Absolute Maximum Ratings Characteristic Repetitive peak reverse voltage Average rectified output current Peak forward surge current (Non-repetitive 60Hz sine wave) Junction temperature Storage temperature range [Ta=25°C] Symbol VRRM IO IFSM TJ Tstg Rating 600 1.0 20 150 -45 ~ 150 Unit V A A °C °C Electrical Characteristics Characteristic Peak forward voltage Repetitive peak reverse current Reverse recovery time Thermal resistance [Ta=25°C] Symbol VFM 1) IRRM trr Rth Test Condition IF=1A VR=600V IF=0.5A, di/dt=-100A/㎲ Junction to ambient 2) Min. - Typ. 1.45 23 - Max. 1.7 10 35 76 Unit V ㎂ ns °C/W 1) Pulse test : tP≤380 ㎲, Duty cycle≤2% 2) Device mounted on glass epoxy PCB (recommanderable minimum solder land) ※ Recommend PCB solder land [Unit : mm] KSD-D6A006-000 2 SF1A600H Electrical Characteristic Curves Fig.1 IF - VF Fig. 2 IR - VR Fig. 3 PF - IO [㎂] Fig. 4 CJ - VR p d Fig. 5 IFSM – Number of cycle Fig. 6 IO derating - TC KSD-D6A006-000 3 SF1A600H The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D6A006-000 4