SHE134PGHEB

Semiconductor SHE134PGHE / SHE134PGHE(B) Oval Type High Efficiency LED Lamp Features • Green colored transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Application • Traffic Signal • Message Board Outline Dimensions STRAIGHT TYPE 4.60 ~ 5.00 unit : mm STOPPER TYPE : (B) 4.60 ~ 5.00 5.40~5.80 5.40~5.80 8.40 ~ 8.80 8.40 ~ 8.80 0.70 Max. 1.20 Min. 3.00~3.50 22.00 Min. 1.27 Typ. 0.55 Max. 0.55 Max. 22.00 Min. 1.00 Min. 2.54 Typ. 2.54 Typ. 1.00 Min. 0.55 Max. (1) (2) 0.55 Max. PIN Connections 1. Anode 2. Cathode KSD-O3C007-000 1 SHE134PGHE / SHE134PGHE(B) Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Operating temperature range Storage temperature range 2 1 (Ta=25oC) Symbol PD IF IFP Topr Tstg Rating 150 40 50 -25∼85 -30∼100 Unit mW mA mA ℃ ℃ * Soldering temperature Tsol 260℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package ※ Recommend document -. LED is very sensitive to ESD. Electrical / Optical Characteristics Characteristic Forward voltage (Ta=25oC) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA Min 2640 520 - Typ 3.2 525 30 ±30 ±15 Max 3.8 8960 530 - Unit V mcd nm nm deg * Luminous intensity Dominant wavelength Spectrum bandwidth *3Half angle 4 λD ∆λ θ1/2 X Y IF= 20mA *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% *4. Luminous Intensity Classification T1 2640~3400 T2 3400~4360 U 4360~5600 V1 5600~7200 V2 7200~8960 KSD-O3C007-000 2 SHE134PGHE / SHE134PGHE(B) Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Forward Voltage VF [V] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Fig. 5-1 Radiation Diagram(X) Fig. 5-2 Radiation Diagram(Y) 100 50 0 50 100 100 50 0 50 100 Relative Luminous Intensity Iv [%] Relative Luminous Intensity Iv [%] KSD-O3C007-000 3 SHE134PGHE / SHE134PGHE(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O3C007-000 4