SL432AM

Semiconductor SL432xM Programmable Voltage Reference Description The SL432 series are 3-terminal precision shunt regulators that are programmable over a wide voltage range of 1.24V to 16V with 1.0%, 2.0% tolerance. The SL432 series have a low dynamic impedance of 0.25Ω. These features make the SL432 series an excellent replacement for zener diodes in numerous applications circuits that require a precision reference voltage. Features • Low voltage operation 1.24V • Programmable output voltage from 1.24V to 16 V • Voltage reference tolerance 1.0%, 2.0% • Wide operating current range of 60uA to 30mA Ordering Information Type NO. SL432xM Marking SL432□ □: Grade => None:±2% , A:±1% Package Code TO-92M Outline Dimensions Symbol 4.0±0.1 3.0±0.1 unit : mm 0.44 REF 0.52 REF 14.0±0.40 Functional block diagram 1.27 Typ. 2.54±0.1. 123 0.7 Typ. 0.42 Typ. 3.0±0.1 3.8 Min. PIN Connections 1. Reference 2. Anode 3. Cathode KSI-9050-000 1 SL432xM Absolute maximum ratings (Operating ambient temperature range applies unless other specified) Parameter Cathode to Anode voltage Cathode current range Reference input current range Power dissipation Operating temperature range Storage temperature range Symbol VKA IKA Iref PD Topr Tstg Ratings 18 -20 ~+30 -0.05~+10 500 -40~+85 -65~+150 Unit V mA mA mW °C °C Recommended operating conditions Parameter Cathode to Anode voltage Cathode current range Symbol VKA IKA Min. Vref 0.1 Ratings Max. 16 30 Unit V mA Electrical Characteristics (Ambient temperature at 25°C, CL=0.1uF , unless otherwise noted.) Parameter Reference input voltage (Fig. 1, Note 1) Deviation of reference input voltage Over temperature(Fig. 1, Note 1,2) Ratio of change in reference input Voltage to the change in cathode Voltage(Fig. 2) Reference input current(Fig. 2) Deviation of reference input current over temperature(Fig. 2) Minimum cathode current for Regulation(Fig. 1) Off-state cathode current(Fig. 3) Dynamic impedance(Fig. 1, Note 3) Symbol Vref ∆Vref ∆Vref ∆VKA Iref ∆Iref IMIN IOFF ZKA Condition VKA=Vref, IKA=10mA SL432AM SL432M Min. 1.228 1.215 - Typ. 1.240 10 1.0 0.7 0.04 55 5 0.25 Max. 1.252 1.265 20 2.7 1.0 0.08 80 50 0.4 Unit V mV mV/V µA µA µA nA Ω VKA=Vref, IKA=10mA @TA=TLOW to THIGH IKA=10mA ∆VKA=Vref-16V IKA=10mA R1=10KΩ, R2=∞ IKA=10mA R1=10KΩ, R2=∞ VKA=Vref VKA=16V, Vref=0V VKA=Vref, f ≤ 1.0KHz IKA=0.1mA-30mA Fig. 1 Fig. 2 Fig. 3 : TLOW=-40°C, THIGH=+85°C , : ∆Vref= Vref Max. - Vref Min. , : ZKA= ∆VKA/ ∆IKA KSI-9050-000 2 SL432xM Electrical Characteristics Curves Fig.1 IKA vs VKA Fig. 2 IMIN vs VKA Fig. 3 △Ioff vs Ta Fig. 4 △Vref vs Ta Fig. 5 Gv vs. frequency Fig. 6 Pulse Response KSI-9050-000 3 SL432xM These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KSI-9050-000 4