SR1316-H

Semiconductor SR1316-H High Brightness Chip LED Lamp Features • • • • 1.6mm(L)×0.8mm small size surface mount type Thin package of 0.55mm(H) thickness Transparent clear lens optic High luminous Applications • • • • LCD backlighting Keypad backlighting Symbol backlighting Front panel indicator lamp Outline Dimensions unit : mm KLR-9010-001 1 SR1316-H bsolute maximum ratings Characteristic Power Dissipation Forward Current * Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature 2 1 Symbol PD IF IFP VR Topr Tstg Ratings 65 25 50 4 -25∼80 -30∼100 240℃ for 5 seconds Unit mW mA mA V °C °C * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Recommended soldering Temperature Profile Temp(℃) Peak Temp max 240℃ 1~ 4℃/sec 220℃ 140~ 160℃ P reheating area 120 1~4℃/sec Time(sec) Solder area max. 50sec Peak time max 10sec -2~ -6℃/sec Electrical Characteristics Characteristic Forward Voltage Luminous Intensity Peak Wavelength Spectrum Bandwidth Reverse Current *3Half Angle Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA VR=4V Min. Typ. Max. 1.8 8 660 20 ±65 ±70 2.5 10 - Unit V mcd nm nm uA deg λP ∆λ IR θ1/2 x Y IF= 20mA *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity KLR-9010-001 2 SR1316-H Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Forward Current IF [mA] Forward Voltage VF [V] Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Fig. 5-1 Radiation Diagram 0° 0° -3 Fig. 5-2 Radiation Diagram 0° 30 ° -3 0° 30 ° -6 0° -6 0° ° 60 ° 60 -90° -90° 90° 90° 100 50 0 50 100 100 50 0 50 100 Relative Luminous Intensity [%] Relative Luminous Intensity [%] KLR-9010-001 3 SR1316-H These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLR-9010-001 4