SR3317-VB

Semiconductor SR3317-V / SR3317-V(B) High Brightness LED Lamp Features • Colorless transparency lens type • φ3mm(T-1) all plastic mold type • Very High luminosity Outline Dimensions STRAIGHT TYPE 2.80~3.20 unit : mm STOPPER TYPE : (B) 2.80~3.20 5.10 ~ 5.50 2.70 ~ 3.10 5.10 ~ 5.50 2.70 ~ 3.10 1.20 Min. 0.80 Max. 0.70 M ax. 4.70 ~ 5.70 1.27 Typ. 23.00 Min. 1.27 Typ. 1.00 0.70 23.00 M ax. Min. Min. 1.00 Min. 2.54 Typ. 2.54 Typ. 3.50 ~ 3.90 M ax. 3.50 ~ 3.90 M ax. 12 3.60 ~ 4.00 12 3.60 ~ 4.00 PIN Connections 1. Anode 2. Cathode 0.45 KSD-O2B039-000 0.45 1 SR3317-V/ SR3317-V(B) Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Reverse voltage Operating temperature range Storage temperature range 2 1 (Ta=25oC) Symbol PD IF IFP VR Topr Tstg Rating 75 30 50 3 -25∼85 -30∼100 Unit mW mA mA V °C °C * Soldering temperature Tsol 260°C for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics Characteristic Forward voltage *3Luminous intensity Peak wavelength Spectrum bandwidth Reverse current *4Half angle (Ta=25oC) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA VR=4V IF= 20mA Min. Typ. Max. 148 2.1 212 660 20 ±22 2.5 10 - Unit V mcd nm nm uA deg λP ∆λ IR θ1/2 *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *3. Luminous intensity maximum tolerance for each grade classification limit is ±18% KSD-O2B039-000 2 SR3317-V/ SR3317-V Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Luminous Intensity IV [mcd] 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward Current IF [mA] 50 30 500 300 10 5 3 100 50 30 1 0.5 0.3 1.2 10 5 3 0.3 0.5 1 3 5 10 30 50 100 Forward Voltage VF [V] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution 100 Current IF [mA] 40 Relative Intensity [%] 80 30 60 20 40 Forward 10 20 0 -25 0 20 40 60 80 100 0 500 550 600 650 700 7 50 Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity [%] KSD-O2B039-000 3 SR3317-V / SR3317-V(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2B039-000 4