SRA2207N

Semiconductor SRA2207N PNP Silicon Transistor Descriptions • Switching application • Interface circuit and driver circuit application Features • • • • With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process Complementary pair with SRC1207N Ordering Information Type NO. SRA2207N Marking SRA2207 Package Code TO-92 Outline Dimensions 4.20~4.40 4.20~4.40 unit : mm 2.25 Max. • Equivalent Circuit OUT IN 0.52 Max. 13.50~14.50 R1 R2 0.90 Max. 1.27 Typ. 2.14 Typ. COMMON 123 3.55 Typ 3.09~3.29 0.40 Max. R11 R 10KΩ 10KΩ R22 R 47KΩ 47KΩ PIN Connections 1. COMMON 2. OUT 3. IN KSD-R0C018-000 1 SRA2207N Absolute Maximum Ratings Characteristic Output voltage Input voltage Output current Power dissipation Junction temperature Storage temperature range (Ta=25°C) Symbol VO VI IO PD TJ Tstg Rating -50 -30, 6 -100 400 150 -55 ~ 150 Unit V V mA mW °C °C Electrical Characteristics Characteristic Output cut-off current DC current gain Output voltage Input voltage (ON) Input voltage (OFF) Transition frequency Input current Input resistor (Input to base) Input resistor (Base to common) (Ta=25°C) Symbol IO(OFF) GI VO(ON) VI(ON) VI(OFF) fT * Test Condition VO=-50V, VI=0 VO=-5V, IO=-10mA IO=-10mA, II=-0.5mA VO=-0.2V, IO=-5mA VO=-5V, IO=-0.1mA VO=-10V, IO=-5mA, f=1MHz VI=-5V, IO=0 - Min. Typ. Max. 80 -0.5 7 33 150 -0.1 200 10 47 -500 -0.3 -1.8 -0.88 13 61 Unit nA V V V MHz mA KΩ KΩ II R1 R2 * : Characteristic of transistor only KSD-R0C018-000 2 SRA2207N Electrical Characteristic Curves Fig. 1 IO - VI(ON) Fig. 2 IO - VI(OFF) Fig. 3 GI - IO The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-R0C018-000 3 ㎂