ACFL-6211T-500E

ACFL-6211T, ACFL-6212T Automotive High-Speed, Low-Power Digital Optocoupler with R2Coupler® Isolation in a Stretched 12-Pin Surface Mount Plastic Package Data Sheet Description Features The ACFL-6211T and ACFL-6212T are automotive grade dual channel, bi-directional, high speed digital CMOS optocouplers. The stretched SO-12 stretched package outline is designed to be compatible with standard surface mount processes and occupies the same land area as their single channel equivalent, ACPL-K71T and ACPL-K72T, in stretched SO8 package. ƒƒ Qualified to AEC Q100 Grade 1 Test Guidelines This digital optocoupler uses an insulating layer between the light emitting diode and an integrated photo detector to provide electrical insulation between input and output. Each channel of the digital optocoupler has a CMOS detector IC with an integrated photodiode, a high speed trans-impedance amplifier, and a voltage comparator with an output driver. Each channel is also isolated from the other. ƒƒ ACFL-6211T: 25 ns at IF = 10 mA (typ) ƒƒ Automotive Wide Temperature Range: –40°C to +125°C ƒƒ 5V CMOS compatibility ƒƒ 40 kV/µs Common-Mode Rejection at VCM=1000V (typ) ƒƒ Low Propagation Delay : ƒƒ ACFL-6212T: 60 ns at IF = 4 mA (typ) ƒƒ Compact, Auto-Insertable Stretched SO12 Packages ƒƒ Worldwide Safety Approval: —— UL 1577 recognized, 5 kVRMS/1 min. —— CSA Approved Broadcom R2Coupler technology provides reinforced insulation and reliability that delivers safe signal isolation critical in automotive and high temperature industrial applications. Features Functional Diagram ƒƒ Automotive IPM Driver for DC-DC converters and motor inverters —— IEC/EN/DIN EN 60747-5-5 ƒƒ CANBus and SPI Communications Interface VDD1 1 12 CA1 VOUT1 ƒƒ High Temperature Digital/Analog Signal Isolation 2 11 AN1 ƒƒ Power Transistor Isolation GND 1 3 10 VDD2 AN2 4 9 VOUT2 CA2 5 8 GND 2 CA2 6 7 GND 2 Truth Table LED OUTPUT ON LOW OFF HIGH Note: The connection of a 1 μF bypass capacitor between pins 1 and 3 and pins 10 and 7/8 (or 7 and 8) is recommended. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments. Broadcom -1- ACFL-6211T, ACFL-6212T Data Sheet Pin Description Pin No. Pin Name Description Pin No. Pin Name Description 1 VDD1 Primary Side Power Supply 7 GND2 Secondary Side Ground 2 VOUT1 Output 1 8 GND2 Secondary Side Ground 3 GND1 Primary Side Ground 9 VOUT2 Output 2 4 AN2 Anode 2 10 VDD2 Secondary Side Power Supply 5 CA2 Cathode 2 11 AN1 Anode 1 6 CA2 Cathode 2 12 CA1 Cathode 1 Ordering Information Part Number Option (RoHS Compliant) ACFL-6211T -000E -060E ACFL-6212T Package Stretched SO-12 Surface Mount Tape and Reel UL 5000 VRMS/ 1 Minute Rating X X X X -500E X X X -560E X X X -000E -060E Stretched SO-12 X X X X -500E X X X -560E X X X IEC/EN/DIN EN 60747-5-5 Quantity 80 per tube X 80 per tube 1000 per reel X 1000 per reel 80 per tube X 80 per tube 1000 per reel X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example: ACFL-6212T-560E to order product of SSO-12 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Option datasheets are available. Contact your Broadcom sales representative or authorized distributor for information. Broadcom -2- ACFL-6211T, ACFL-6212T Data Sheet Package Outline Drawing 12-Lead Surface Mount 0.015 (0.381) 0.032 (0.800) LAND PATTERN RECOMMENDATION 12 11 10 9 8 7 RoHS-COMPLIANCE INDICATOR TYPE NUMBER DATECODE 621xT YYWW EE 0.295 +− 0.005 0 1 2 3 4 5 6 EXTENDED DATECODE FOR LOT TRACKING 0.230 +− 0.005 0 + 0.127 ( 5.842 − 0 0.458 (11.630) ( 7.493 +− 0.127 ) 0 0.080 (2.030) 0.020 (0.500) ) 0.326 ± 0.010 (8.284 ± 0.254) 7° 45° 0.063 ± 0.005 (1.590 ± 0.127) 0.008 ± 0.004 (0.200 ± 0.100) 0.015 (0.381) 0.125 ± 0.005 (3.180 ± 0.127) 0.029 ± 0.004 (0.731 ± 0.100) 0.408 ± 0.010 (10.363 ± 0.250) Dimensions in inches (millimeters) Lead coplanarity = 0.004 inches (0.1 mm) Recommended Pb-Free IR Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Note: Non-halide flux should be used Broadcom -3- 7° 0° to 7° 0.010 ± 0.002 (0.254 ± 0.050) ACFL-6211T, ACFL-6212T Data Sheet Regulatory Information The ACFL-6211T and ACFL-6212T are approved by the following organizations: UL UL 1577, component recognition program up to VISO = 5 kVRMS CSA Approved under CSA Component Acceptance Notice #5 IEC/EN/DIN EN 60747-5-5 Approved under IEC/EN/DIN EN 60747-5-5 Insulation and Safety Related Specifications Symbol ACFL-6211T/ ACFL-6212T Unit Conditions Minimum External Air Gap (Clearance) L(101) 8.3 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 8.5 mm Measured from input terminals to output terminals, shortest distance path along body. 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. 175 V Parameter Minimum Internal Plastic Gap (Internal Clearance) Tracking Resistance (Comparative Tracking Index) CTI Isolation Group (DIN VDE0109) IIIa DIN IEC 112/VDE 0303 Part 1 Material Group (DIN VDE 0109) IEC/EN/DIN EN 60747-5-5 Insulation Related Characteristic (Option 060E and 560E) Description Symbol Installation classification per DIN VDE 0110/1.89, Table 1 for rated mains voltage ≤ 600VRMS for rated mains voltage < 1000VRMS Characteristic Unit I-III I-III Climatic Classification 40/125/21 Pollution Degree (DIN VDE 0110/1.89) 2 Maximum Working Insulation Voltage VIORM 1140 VPEAK Input to Output Test Voltage, Method b VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5 pC VPR 2137 VPEAK Input to Output Test Voltage, Method a VIORM x 1.6 = VPR, Type and sample test, tm = 10 sec, Partial Discharge < 5 pC VPR 1824 VPEAK VIOTM 6000 VPEAK TS IS,INPUT PS,OUTPUT 175 230 600 °C mA mW RS 109 Ω Highest Allowable Overvoltage (Transient Overvoltage, tini = 60 sec) Safety Limiting Values (Maximum values allowed in the event of a failure) Case Temperature Input Current Output Power Insulation Resistance at TS, VIO = 500V Broadcom -4- ACFL-6211T, ACFL-6212T Data Sheet Absolute Maximum Ratings Symbol Min. Max. Unit Storage Temperature Parameter TS –55 +150 °C Ambient Operating Temperature [1] TA –40 +125 °C Junction Temperature TJ +150 °C Supply Voltages VDD 0 6.5 V Output Voltage VO –0.5 VDD + 0.5 V Average Forward Input Current IF 20.0 mA IF( TRAN) 1 80 A mA Vr 5 V Input Power Dissipation PI 40 mW Average Output Current Io 10 mA Output Power Dissipation Po 30 mW Peak Transient Input Current (IF at 1 µs pulse width,