ACPM-9313-BLK

ACPM-9313 LTE Band 13/14 MIPI APT PA 2.0 mm × 2.5 mm Power Amplifier Module Product Brief Description Features The ACPM-9313 is a fully matched 10-pin surface mount power amplifier module developed for LTE Band 13 and Band 14. The 2 mm × 2.5 mm form-factor package is self contained, and it incorporates 50-ohm input and output matching networks.  The ACPM-9313 features CoolPAM circuit technology that supports two power modes—low and high. The CoolPAM is a stage bypass technology that enhances PAE (power added efficiency) at low power range. The stage bypass feature enhances PAE further at low output range, and it enables the PA to have exceptionally low quiescent current. Without a DC-DC converter, it dramatically saves average current consumption, extends the talk time of mobiles, and prolongs the battery life. It can be used with the APT (average power tracking) operation to reduce the power consumption when VCC1 and VCC2 are connected to a DC-DC converter externally, which adjusts the VCC1 and VCC2 voltage according to the output power level.  The power amplifier is manufactured on an advanced InGaP HBT (hetero-junction bipolar transistor) MMIC (microwave monolithic integrated circuit) technology that offers state-of-the-art reliability, temperature stability, and ruggedness. Thin package (0.82 mm typical) Excellent linearity in APT mode MIPI RFFE interface Two-mode power Quiescent current control for high power mode and low power mode Ten-pin surface mounting package Internal 50-ohm matching networks for both RF input and output Separate drive and output VCC supplies Green – Lead-free and RoHS compliant        Applications LTE Band 13 LTE Band 14   Ordering Information Part Number ACPM-9313-TR1 Avago Technologies -1- Number of Devices 1,000 Container 178 mm (7 in.) tape/reel ACPM-9313 Product Brief Package Dimensions Package Dimensions The dimensions are in millimeters. 1JO

.BSL 
 
 
 
 
 
œ


œ
 
œ

Marking Specification 1JO

.BSL 111 1   '== ̻ %







o
%BUF
$PEF ;;





o
"TTFNCMZ
-PU
*EFOUJGJDBUJPO 

o
%FWJDF
$PEF Avago Technologies -2- Pin Description Pin # Name Description 1 VCC1 DC supply voltage, connect the first RF stage collector to which APT is applied (0.5V~3.5V) 2 RFIN RF input 3 VBAT DC supply voltage, connect to the bias circuitry with a fixed voltage (higher than 3.2V) 4 VIO RFFE enable 5 SDATA RFFE data 6 SCLK RFFE clock 7 GND Ground 8 SEL RFFE duplicate device select 9 RFOUT RF output 10 VCC2 DC supply voltage, connect to the second RF stage collector to which APT is applied (0.5V~3.5V) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright © 2015 Avago Technologies. All Rights Reserved. AV02-4848EN – 2015-03-24